GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Horner Electric |
Product Type: | Automation Product |
Part Number: | HE697BEM600 |
Series: | PLC I/O |
UPC: | 134631653905 |
Description:
The Horner Electric HE697BEM600 is an I/O interface module. It is designed to integrate with the Series 90-30 products. The maximum power consumption of this module is 30 watts, and its isolation voltage range is 24 volts DC. It also includes protection against over-voltage and over-current levels. In addition, this I/O interface and software module can draw 0.63 amperes at +/- 2.5 volts. Its remote sensing is also adjustable up to 6.0 volts.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This product is an I/O Interface and software from the Series Six product line. This product was designed and manufactured by Horner Electric. The HE697BEM600 can be used with the external power supply module from the Series 90-30 product line that features a whole range of programmable logic controller series 5, or PLC-5, units. This I/O interface module is developed to function with a power supply that delivers five (5) and twenty-four (24) volts. It also needs a PSOK signal from the external power source to guarantee that modules within the rack are appropriately shut down before power loss. This module's peak power consumption ranges from thirty (30) watts at five (5) volts direct current (DC) to thirty (30) watts at twenty-four (24) volts direct current (DC) isolated voltage. This Horner Electric product has a remote sense adjustment range of six (6.0) volts.
Furthermore, the power fails range of this adapter is four (4) milliseconds before a loss of five (5) or twenty-four (24) volts, and the output ripple range is +/-1 percent p-p max. Its output noise level is +/-5 percent p-p max at the same time. This product offers protection against both overvoltages and overcurrents. This I/O module for the Series 90-30 products is compact and easy to manage. Its compact design architecture makes it suitable for logistics storage, and it also makes it portable in case of technology modification or replacement in bulk quantity in the plant-wide scenario. The current status of this I/O interface is discontinued.
Question: Does Automation Stop offer repairs on the HE697BEM600?
Answer: Yes. We offer repairs for the HE697BEM600 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Horner Electric and HE697BEM600?
Answer: If you buy the HE697BEM600 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the HE697BEM600 online?
Answer: Yes. Automation Stop sells the HE697BEM600 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the HE697BEM600?
Answer: The HE697BEM600 is made by Horner Electric.
For additional information about HE697BEM600 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding HE697BEM600.
Revision Part # | Also Known As | Availability |
---|---|---|
HE697BEM600D | HE697BEM600 Series D, Rev D | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.