GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Horner Electric |
Product Type: | Automation Product |
Part Number: | HE693THM889 |
Series: | PLC I/O |
UPC: | 756080687814 |
Description:
The HE693THM889 is a thermocouple input device that was produced by Horner APG. It is to be directly connected to a PLC, without external transducers, transmitters or other equipment. Its resolution is 0.5 degrees Celsius and the normal accuracy � 0.5 degrees Celsius. The thermocouple has eight (8) input signals, a power consumption of 70 milliamperes at 5 volts DC and 60 milliamperes with a 24-volt relay. The operating temperature range of this device is 0 to 60 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number HE693THM889 is a thermocouple input module, manufactured by Horner APG. The device main application is to be connected directly to PLC unit. For this, it does not require external signal processors like transducers, transmitters, or other devices. The thermocouple has a resolution of 0.5 degrees Celsius and its temperature values are transmittable to the PLC percent AI I/O table either in 0.5 degrees Celsius or 0.5 degrees Fahrenheit. The family of Horner thermocouple devices can have four (4) or eight (8) input channels. Part number HE693THM889 features eight (8) input channels. The device has the ability for open circuit detection. This capability serves when there is an open circuit condition to be able to register a maximal temperature value on the percent AI table. Also, it possesses percent I alarm bits, which activate in case of open circuit.
The unit has a power consumption of 70 milliamperes when used with 5 volts DC and 60 milliamperes with a 24-volt relay. It has a typical accuracy of ± 0.5 degrees Celsius. The supported types are J, K, N, T, E, R, and S; each of which capable to cover a temperature range. It has an input impedance of more than twenty million (20,000,000) ohms and common mode rejection above 100 decibels. Its maximum safe overload is ± 35 volts and common mode range ± 12 volts. The thermocouple A/D conversion type is integrating, and its time is 5 milliseconds. The device should operate in an environment of temperature in the range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).
Question: Does Automation Stop offer repairs on the HE693THM889?
Answer: Yes. We offer repairs for the HE693THM889 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Horner Electric and HE693THM889?
Answer: If you buy the HE693THM889 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the HE693THM889 online?
Answer: Yes. Automation Stop sells the HE693THM889 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the HE693THM889?
Answer: The HE693THM889 is made by Horner Electric.
For additional information about HE693THM889 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding HE693THM889.
Revision Part # | Also Known As | Availability |
---|---|---|
HE693THM889C | HE693THM889 Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.