GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Horner Electric |
Product Type: | Automation Product |
Part Number: | HE693THM888 |
Series: | PLC I/O |
UPC: | 245310601237 |
Description:
The HE693THM888 is a High Resolution Thermocouple Input Module that is branded and manufactured by Horner Electric. This hardware allows thermocouple temperature sensors to be directly connected to the PLC without signal processing.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Horner Electric HE693THM888 is a High Resolution Thermocouple Input Module that allows thermocouple temperature sensors to be directly connected to the PLC without external signal processing. The resolution of the HE693THM888 is 0.1 degree Celsius and temperature values may be reported to the PLC I/O table in 0.5 and 0.1 degrees Celsius and Fahrenheit. The HE693THM888 features eight (8) thermocouple channels whose temperature values are reported to eight (8) %AI input registers. This hardware provides 16 %I Alarm Bits, one (1) open circuit alarm, and one (1) setpoint alarm for each channel. Alarm setpoints are set for each channel through eight (8) %AQ registers. Open circuit alarm bits for each channel correspond to the first eight (8) successive %I bits and the alarm setpoints for each channel correspond to the second eight (8) successive %I bits.
Specifications for the HE693THM888 include a power consumption of 100 milliamperes at 5 Volts DC, eight (8) channels, and supported types as follows: J, K, N, T, E, R, S, B, C, and X. The HE693THM888 has a resolution of 0.1 degree Celsius and I/O points required are as follows: 8 %AI, 8 %AQ, and 16 %I. The HE693THM888 has an input impedance of >20 Mohms and a maximum sustained O/L of +/- 35 Volts. Common mode rejection is >100 decibels and A/D conversion type is 18-bit integrating. A/D conversion time is 5 milliseconds while scan rate is 16 channels per second. The HE693THM888 has an operating temperature that ranges between 0 and 60 degrees Celsius, or 32 to 140 degrees Fahrenheit. Relative humidity is 5% to 95% (non-condensing).
Brand | Horner Electric |
Module Type | High Resolution Thermocouple Input Module |
Part Number | HE693THM888 |
Power Consumption | 100 milliamperes at 5 Volts DC |
Number of Channels | Eight (8) |
Types Supported | J, K, N, T, E, R, S, B, C, and X |
Resolution | 0.1 degree Celsius |
I/O Points Required | 8 %AI, 8 %AQ, 16 %I |
Input Impedance | >20 Mohms |
Maximum Sustained O/L | +/- 35 Volts |
Common Mode Rejection | >100 decibels |
A/D Conversion Type | 18-Bit Integrating |
A/D Conversion Time | 5 milliseconds |
Scan Rate | 16 Channels per Second |
Operating Temperature | Zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) |
Relative Humidity | 5% to 95% (non-condensing) |
Question: Does Automation Stop offer repairs on the HE693THM888?
Answer: Yes. We offer repairs for the HE693THM888 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Horner Electric and HE693THM888?
Answer: If you buy the HE693THM888 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the HE693THM888 online?
Answer: Yes. Automation Stop sells the HE693THM888 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the HE693THM888?
Answer: The HE693THM888 is made by Horner Electric.
Question: What A/D Conversion Time does the HE693THM888 have?
Answer: The A/D Conversion Time of the HE693THM888 is 5 milliseconds.
Question: What is the A/D Conversion Type of the HE693THM888?
Answer: The HE693THM888 has a A/D Conversion Type of 18-Bit Integrating.
Question: What Brand is included with the HE693THM888?
Answer: The HE693THM888 has a Allen Bradley Automation Brand.
Question: What Common Mode Rejection does the HE693THM888 have?
Answer: The HE693THM888 has a Common Mode Rejection of >100 decibels.
Question: What input/output Points Required does the Allen Bradley Automation HE693THM888 have?
Answer: The HE693THM888 has a input/output Points Required of 8 %AI, 8 %AQ, 16 %I.
Question: What Input Impedance does the Rockwell-Automation HE693THM888 have?
Answer: The Input Impedance of the Rockwell-Automation HE693THM888 is >20 Mohms.
Question: What is the Maximum Sustained O/L of the HE693THM888?
Answer: The Maximum Sustained O/L of the Rockwell Automation HE693THM888 is +/- 35 Volts.
Question: What Module Type does the HE693THM888 have?
Answer: The HE693THM888 has a High Resolution Thermocouple Input Module Module Type.
Question: What is the Number of Channels of the HE693THM888?
Answer: The Number of Channels of the HE693THM888 is Eight (8).
Question: What Operating Temperature does the Allen Bradley HE693THM888 have?
Answer: The HE693THM888 has a Operating Temperature of Zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit).
Question: What part Number does the Allen-Bradley HE693THM888 have?
Answer: The unit Number of the HE693THM888 is HE693THM888.
Question: What is the Power Consumption of the Allen Bradley HE693THM888?
Answer: The Power Consumption of the HE693THM888 is 100 milliamperes at 5 Volts direct current.
Question: What is the Relative Humidity of the HE693THM888?
Answer: The Relative Humidity of the HE693THM888 is 5% to 95% (non-condensing).
Question: What is the Resolution of the HE693THM888?
Answer: The Resolution of the HE693THM888 is 0.1 degree Celsius.
Question: What Scan Rate does the Rockwell Automation HE693THM888 have?
Answer: The Scan Rate of the Rockwell Automation HE693THM888 is 16 Channels per Second.
Question: What Types Supported does the HE693THM888 have?
Answer: The Allen Bradley-Rockwell Automation HE693THM888 has a J, K, N, T, E, R, S, B, C, and X Types Supported.
For additional information about HE693THM888 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding HE693THM888.
Revision Part # | Also Known As | Availability |
---|---|---|
HE693THM888K | HE693THM888 Series K, Rev K | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.