GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Horner Electric |
Product Type: | Automation Product |
Part Number: | HE693THM666 |
Series: | PLC I/O |
UPC: | 750354656582 |
Description:
Part number HE693THM666 is a Horner APG isolated thermocouple module. It has 6 thermocouple channels to register temperature values on 6 percent AI inputs. The values reported are in increments of 0.5 and 0.1 degrees Celsius, or 0.5 and 0.1 degrees Fahrenheit. The device is backplane isolated and has a notch filter of 60 hertz. There are percent I, percent AI, and percent AQ reference types for registering temperature, alarm set points, and alarm situations.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Item number HE693THM666 is an isolated thermocouple module, manufactured by Horner APG. Its main purpose is to support thermocouple temperature sensor connection to PC, without needing external signal processing like transducers, transmitters and similar equipment. The module performs all analog and digital thermocouple signal processing. It reports temperature values to the I/O PLC table in increments of 0.5 degrees Celsius (0.5 degrees Fahrenheit) and 0.1 degrees Celsius (0.1 degrees Fahrenheit). The module has six (6) thermocouple channels, and each channel temperature value is reported to six (6) percent AI input registers. The unit is backplane-isolated with a ±1500 volts AC isolation rating. It has a ±250 volts AC isolation channel-to-channel and a 60 hertz notch filter for eliminating noise from power lines.
The unit power consumption is 200 milliamperes when used at 5 volts DC. It supports types J, K, N, T, E, R, S, B, and C thermocouples. It has an A/D conversion time of five (5) milliseconds and an input impedance of 1000M ohms at less than one hundred (100) millivolts. This unit does not support remote cold junction compensation. There are three (3) reference types that are used with the unit: percent I, percent AI, and percent AQ. The six (6) available percent AI registers provide the temperature and the six (6) percent AQ can be configured for alarm set point registers. The last group, the percent I registers, display the alarm situations. The isolated thermocouple module complies with the EMC directive and is CE-marked, meeting the criteria 89/336/EMC, 92/31/EEC, and 93/68/EEC.
Question: Does Automation Stop offer repairs on the HE693THM666?
Answer: Yes. We offer repairs for the HE693THM666 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Horner Electric and HE693THM666?
Answer: If you buy the HE693THM666 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the HE693THM666 online?
Answer: Yes. Automation Stop sells the HE693THM666 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the HE693THM666?
Answer: The HE693THM666 is made by Horner Electric.
For additional information about HE693THM666 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding HE693THM666.
Revision Part # | Also Known As | Availability |
---|
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.