GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Horner Electric |
Product Type: | Automation Product |
Part Number: | HE693STG883 |
Series: | PLC I/O |
UPC: | 353997786069 |
Description:
The HE693STG883 is a product type of a high-resolution strain gage input module. It connects to the PLCs directly to enable bridged strain gauges' connection. It belongs to the 90-30 product lineup. This product is manufactured by Horner Electric and is a 16-bit resolution module. Aside from that, it has eight channels, and it takes 1 sec for the 35 channel conversion, and its input range is +/-20, +/-25, +/-30.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The HE693STG883 is a high-resolution strain gauge input module from the 90-30 series by Horner Electric. It is a 16-bit resolution module that supports eight channels. In addition, this unit's power consumption comprises an inrush current: relay constant state: 150 milliamps at 5 volts dc, 80 milliamps at 24 volts dc Relay with 60 milliamps at 5 volts dc and 30 milliamps at 24 volts, respectively. Besides that. it has an input range in millivolts: +/-20, +/-25, +/-30. Moreover, this gage strain input module has a 10v dc excitation monitoring range, a >1000 mΩ input impedance level, and a 0.3 percent accuracy ratio. Aside from these attributes, it also includes an integrating conversion type and can convert 35 channels per second to these features. This module's operating temperature range is 0 to 60°C, and the relative humidity range suited for this module is 5% to 95% non-condensing.
With this module, users can also turn on or off channels. As a result, the unit's response time should not be impacted by longer usable channels. In addition to these useful features, the module can also monitor and compensate for load cell excitation voltage changes. The module, however, does not have an excitation voltage output. Aside from that, it has a set-point for each channel, which enables the ladder logic to initiate real-time applications. Overall this 16-bit high-resolution strain gauge module offers basic features compared to recent product ranges. However, it can be used as a replacement due to its reliable build quality.
Question: Does Automation Stop offer repairs on the HE693STG883?
Answer: Yes. We offer repairs for the HE693STG883 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Horner Electric and HE693STG883?
Answer: If you buy the HE693STG883 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the HE693STG883 online?
Answer: Yes. Automation Stop sells the HE693STG883 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the HE693STG883?
Answer: The HE693STG883 is made by Horner Electric.
For additional information about HE693STG883 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding HE693STG883.
Revision Part # | Also Known As | Availability |
---|
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.