GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Horner Electric |
Product Type: | Automation Product |
Part Number: | HE693SNPCBL |
Series: | PLC I/O |
UPC: | 151256219613 |
Description:
The Horner HE693SNPCBL is an SNP to RS-232 adapter. This device has two connectors. The adapter weighs approximately 130 grams (0.29 pounds).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Horner HE693SNPCBL is an SNP to RS-232 adapter that is employed in industrial applications. The device has two connectors. The adapter has a single connector on each side. This cable includes a 15-pin SNP right angle connector on the first end that requires less clearance space in front of an I/O module or a PLC and facilitates cable routing. This SNP port can be inserted directly into the programmer port of the PLC on the rack power supply of the CPU. The HE693SNPCBL includes also a 9-pin RS-232 connector on the second end. This serial connector can be connected to any RS-232 module or device. The SNP device can be directly supplied from the programming port with a maximum current of 100 milliamperes at a voltage of 5 volts DC.
The HE693SNPCBL adapter includes two green LED indicators that show the communication status during the data transfer process. The first LED indicator is the “RX” LED and the second one is the “TX” LED indicator. This SNP adapter can be employed with IBM personal computers by respecting a specific wiring diagram. This device can operate at an altitude of up to 1000 meters (3300 feet) without deterioration. The adapter can be stored at a temperature from -40 degrees to 70 degrees Celsius (-40 degrees to 158 degrees Fahrenheit) in a safe environment that is free from condensation or corrosive material. The HE693SNPCBL supports a non-condensing relative humidity range from 5 percent to 95 percent and a vibration frequency range from 10 hertz to 500 hertz. This unit weighs approximately 130 grams (0.29 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications without condensation.
Brand | Horner Automation |
Series | PLC I/O |
Part Number | HE693SNPCBL |
Description | SNP to RS-232 adapter |
Number of connectors | 2 |
1st end connector | 15-pin SNP port |
2nd end connector | 9-pin RS-232 port |
Maximum current | 100 mA at 5VDC |
Number of status LEDs | 2 |
LED indicators | RX green LED and TX green LED |
Weight | 130 g (0.29 lb.) |
Question: Does Automation Stop offer repairs on the HE693SNPCBL?
Answer: Yes. We offer repairs for the HE693SNPCBL and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Horner Electric and HE693SNPCBL?
Answer: If you buy the HE693SNPCBL through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the HE693SNPCBL online?
Answer: Yes. Automation Stop sells the HE693SNPCBL online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the HE693SNPCBL?
Answer: The HE693SNPCBL is made by Horner Electric.
Question: What 1st end connector does the Rockwell Automation HE693SNPCBL have?
Answer: The 1st end connector of the HE693SNPCBL is 15-pin SNP port.
Question: What is the 2nd end connector of the Rockwell-Automation HE693SNPCBL?
Answer: The 2nd end connector of the HE693SNPCBL is 9-pin RS-232 port.
Question: What Brand is included with the Allen Bradley/Rockwell Automation HE693SNPCBL?
Answer: The Allen Bradley/Rockwell Automation HE693SNPCBL has a Horner Automation Brand.
Question: What is the Description of the HE693SNPCBL?
Answer: The Description of the Allen Bradley-Rockwell Automation HE693SNPCBL is SNP to RS-232 adapter.
Question: What LED indicators are included with the Allen Bradley Automation HE693SNPCBL?
Answer: The HE693SNPCBL has LED indicators RX green LED and TX green LED.
Question: What Maximum current does the HE693SNPCBL have?
Answer: The Maximum current of the Allen Bradley HE693SNPCBL is 100 mA at 5VDC.
Question: What is the Number of connectors of the Allen Bradley-Rockwell Automation HE693SNPCBL?
Answer: The Number of connectors of the HE693SNPCBL is 2.
Question: What is the Number of status LEDs of the Allen Bradley Automation HE693SNPCBL?
Answer: The Number of status LEDs of the Allen Bradley Automation HE693SNPCBL is 2.
Question: What component Number does the HE693SNPCBL have?
Answer: The part Number of the Allen Bradley-Rockwell Automation HE693SNPCBL is HE693SNPCBL.
Question: What is the Weight of the Allen-Bradley HE693SNPCBL?
Answer: The Allen-Bradley HE693SNPCBL has a Weight of 130 g (0.29 lb.).
For additional information about HE693SNPCBL check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding HE693SNPCBL.
Revision Part # | Also Known As | Availability |
---|
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.