GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Horner Electric |
Product Type: | Automation Product |
Part Number: | HE693RTM705 |
Series: | PLC I/O |
UPC: | 831054588103 |
Description:
The HE693RTM705 provides two RTU/Modbus master channels that can be controlled with 90-30 or 90-70 Series PLCs to access data from RTU?s remote slave.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The HE693RTM705 is a Horner RTU/Modbus Master that can be controlled with Series 90-30 and 90-70 PCM based platforms. It provides two Modbus/RTU master channels that can access data from remote slaves of the RTU. Each channel of the module can be programmed individually for radio modem, dial-in, dial-out, multidrop, and direct connection operations. Both channels of the module can send or receive discrete or analog data through standard RTU commands. The operator can send multiple commands to each RTU slave with every command requesting a single point or multiple contiguous points of a maximum of 250 bytes. Data that is required to be sent is stored in the reference tables of the 90-30 or 90-70 Series modules. These reference data tables also store command lists that control what RTU commands need to be sent to slave RTUs. Once the HE693RTM705 starts, it uses these command lists to transfer data between slave RTUs and data tables of 90-30/90-70 Series modules. It may also run in a single command mode where the new commands are issued during the operation. The users can adjust the time between updates to each slave individually.
Each slave has an individual status field that can reflect the communication status of the RTU. By monitoring each status field continuously, the 90-30/90-70 modules can detect communication and configuration errors on a slave-by-slave basis. The HE693RTM705 Horner RTU/Modbus master module can support the report by exception when used with APG Modbus slaves. A slave connected to the module may originate a call to the master module when an exception occurs. The HE693RTM705 then determines the ID of the slave and executes the associated command list with a caller to send or receive the appropriate data.
Power Consumption | 425 milliamperes @ 5 Volts DC |
Network Type | RS-485; RS 432 |
Product Type | Modbus Master Module |
Ports | 2 |
Serial Ports | RS-232, RS-485 |
Weight | 1 lb. |
Multiple Contiguous Points | Up to 250 Bytes |
Series | 90-30 CPU |
Indicating LEDs | 3 |
Question: Does Automation Stop offer repairs on the HE693RTM705?
Answer: Yes. We offer repairs for the HE693RTM705 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Horner Electric and HE693RTM705?
Answer: If you buy the HE693RTM705 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the HE693RTM705 online?
Answer: Yes. Automation Stop sells the HE693RTM705 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the HE693RTM705?
Answer: The HE693RTM705 is made by Horner Electric.
Question: What Indicating LEDs does the Allen Bradley HE693RTM705 have?
Answer: The HE693RTM705 has a Indicating LEDs of 3.
Question: What is the Multiple Contiguous Points of the HE693RTM705?
Answer: The HE693RTM705 has a Multiple Contiguous Points of Up to 250 Bytes.
Question: What is the Network Type of the HE693RTM705?
Answer: The Network Type of the HE693RTM705 is RS-485; RS 432.
Question: What Ports does the HE693RTM705 have?
Answer: The Ports of the Allen Bradley/Rockwell Automation HE693RTM705 is 2.
Question: What is the Power Consumption of the HE693RTM705?
Answer: The Power Consumption of the Allen Bradley-Rockwell Automation HE693RTM705 is 425 milliamperes @ 5 Volts DC (direct current).
Question: What Product Type is included with the HE693RTM705?
Answer: The HE693RTM705 has a Modbus Master Module Product Type.
Question: What is the Serial Ports of the Rockwell-Automation HE693RTM705?
Answer: The Rockwell-Automation HE693RTM705 has a Serial Ports of RS-232, RS-485.
Question: What Weight does the HE693RTM705 have?
Answer: The HE693RTM705 has a Weight of 1 lb..
For additional information about HE693RTM705 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding HE693RTM705.
Revision Part # | Also Known As | Availability |
---|---|---|
HE693RTM705B | HE693RTM705 Series B, Rev B | Request a Quote |
HE693RTM705C | HE693RTM705 Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.