GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Horner Electric |
Product Type: | Automation Product |
Part Number: | HE693DNT250 |
Series: | PLC I/O |
UPC: | 615051319409 |
Description:
This is the HE693DNT250 DeviceNet Master module. It is manufactured by Horner APG. This module can be used to monitor and control I/O devices connected via the DeviceNet network. It contains one RS-485 connector and one five pin DeviceNet connector. The module has baud rates of 125K, 250K, and 500K, and supports the UCMM protocol. Polled Connections with fragmentation over DeviceNet, and the Group 2 Only protocol are also supported.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The HE693DNT250 is a DeviceNet Master (Scanner) module made by Horner APG. It connects Programmable Logic Controllers (PLCs) in the GE Fanuc Series 90-30. It supports monitoring devices connected in a DeviceNet network. Ladder programs operating in the controller view this scanner as a single I/O module. This module offers support for the UCMM protocol. It features compatibility with the Group 2 Only communication method in DeviceNet. It allows for explicit messaging using Ladder Initiated Explicit Messaging (LIEM). Polled connection features are also available. This scanner module also supports fragmentation on polled as well as explicit connections. It supports all four Message Body Formats for use with the UCMM protocol. This module reads data from the %Q and %AQ registers of the connected PLC. It can convert the data into packets and distribute it to nodes in the DeviceNet network. Incoming data is converted into PLC register format. It is then transmitted to the %I and %AI registers of connected PLCs. The Master module is able to carry out these functions without requiring a ladder program instruction, a COMREQ, or a block move operation. The module has two built-in LED indicators used for diagnostic purposes. The Master module uses a 5 pin connector for connection to DeviceNet I/O modules. An RS-485 Connector is also provided to allow connection to a personal computer. The connection requires an SNP adapter as well as a straight-through 9 pin serial cable to connect to the RS-232 serial port of a PC. This module does not support commands in Logicmaster or SNP formats.
Question: Does Automation Stop offer repairs on the HE693DNT250?
Answer: Yes. We offer repairs for the HE693DNT250 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Horner Electric and HE693DNT250?
Answer: If you buy the HE693DNT250 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the HE693DNT250 online?
Answer: Yes. Automation Stop sells the HE693DNT250 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the HE693DNT250?
Answer: The HE693DNT250 is made by Horner Electric.
For additional information about HE693DNT250 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding HE693DNT250.
Revision Part # | Also Known As | Availability |
---|---|---|
HE693DNT250E | HE693DNT250 Series E, Rev E | Request a Quote |
HE693DNT250M | HE693DNT250 Series M, Rev M | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.