GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Horner Electric |
Product Type: | Automation Product |
Part Number: | HE693DAC420 |
Series: | PLC I/O |
UPC: | 349580520042 |
Description:
Manufactured by Horner Electric, product number HE693DAC420 is an analog output module. This device has a total of 4 analog output channels. It has a maximum power consumption rating of 90 milliamperes at 5 volts DC and 120 milliamperes at 24 volts DC. The D/A resolution of this module is 13 bits. The rated loop voltage of this unit ranges from 3 to 32 volts DC. The operating temperature suitable for this device ranges from 0 to 60 degrees Celsius. The approximate weight of this device is 0.39 kg.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Horner Electric HE693DAC420 is an analog output module. The module has four (4) analog output channels with a 13-bit D/A resolution. This module converts digital values (0 to 32,000) to analog current signals. The output range of each channel is specified as 4 to 20 milliamperes or 0 to 20 milliamperes. This module’s power consumption is rated at 90 milliamperes at 5 volts direct current (DC) and 120 milliamperes at 24 volts direct current (DC). It exhibits a current surge on power-up rated at 250 milliamperes for 10 milliseconds at 5 volts direct current (DC) or 900 milliamperes for 30 milliseconds at 24 volts direct current (DC). The input current of this analog output module is rated at 150 milliamperes at 5 volts direct current (DC) and 110 milliamperes at 24 volts direct current (DC).
The HE693DAC420 analog output module has a maximum linearity error of 0.10% full scale at a current range of 4 to 20 milliamperes and 0.15% full scale at a current range of 0 to 20 milliamperes. Its resolution is 2.0 microamperes in the 4-20mA mode and 2.5 microamperes in the +/-20mA mode. This Horner Electric output module requires an external power rated at 2 to 32 volts direct current (DC), and it has a load impedance rating of 1.1 kilo-ohms maximum at a 24-volt loop voltage. The module’s common mode isolation is rated at 500 volts alternating current (AC) rms, +/- 2000 volts direct current (DC). Additionally, its channel-to-channel isolation is 1500 volts alternating current (AC) rms, +/- 2000 volts direct current (DC). The HE693DAC420 should be operated in an environment where the temperature ranges from 0 to 60 degrees Celsius. This module has an approximate weight of 0.39 kilograms.
Question: Does Automation Stop offer repairs on the HE693DAC420?
Answer: Yes. We offer repairs for the HE693DAC420 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Horner Electric and HE693DAC420?
Answer: If you buy the HE693DAC420 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the HE693DAC420 online?
Answer: Yes. Automation Stop sells the HE693DAC420 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the HE693DAC420?
Answer: The HE693DAC420 is made by Horner Electric.
Question: What can I expect the VAC (voltage alternating current) included with the HE693DAC420 to be?
Answer: The Horner Electric HE693DAC420 has a voltage alternating current (VAC) of 2000.
For additional information about HE693DAC420 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding HE693DAC420.
Revision Part # | Also Known As | Availability |
---|---|---|
HE693DAC420C | HE693DAC420 Series C, Rev C | Request a Quote |
HE693DAC420D | HE693DAC420 Series D, Rev D | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.