GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

HE693DAC410

Manufacturer: Horner Electric
Product Type: Automation Product
Part Number: HE693DAC410
Series: PLC I/O
UPC: 352194523439

Description:

HE693DA410 is an Isolated Analog Output Module that provides four output analog channels with a resolution of 14-bits and channel to ground and channel to channel isolation of 1500 VAC. It can convert digital values in the %AQ registers to analog voltage signals.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

HE693DAC410 module is an isolated output module providing 4 output analog channels with 14-bit resolution and 1500 VAC (RMS) isolation channel to ground and channel to channel. HE693DAC410 module can convert digital values (-32,000 to +32,000) in %AQ registers into voltage signals of +10 V to -10V). The %AQ values are set by the PLC CPU’s ladder logic program. The module can be set by default to 0 V or on hold the last state when the CPU is set out from the RUN mode. This can be done in the configuration settings using the configuration parameter.
To reach the configuration screen in the LM90 configuration package, select I/O configuration, move the cursor over to the slot that contains the module, and select other and Foreign. The parameters required are %AQ Size Byte 1 and 2-5. The HE693DAC410 module can convert every %AQ decimal value into an analog voltage ranging from -10 Volts to +10n volts. The least significant bits of %AQ is 0 and hence, the smallest decimal change is 4, corresponding to 1.25 millivolts. The main source of power for HE693DAC410 is 100 milliampere at 5 Volts DC or 120 milliamperes at 24 Volts DC. To minimize the noise and capacitive loading, use shielded, twisted-pair wiring. When using the shielded wiring, it is important to use earth ground connection. If the shield is connected to the module end, use terminals 9, 10, 19, and 20 for shield ground point.

Technical Specifications

Number of Channels 4
Power Consumption 120 milliampere @24 VDC and 100 milliamperes @5 VDC
Current Surge on Power-up 900 milliamperes for 300ms @24 VDC and 250 milliamperes for 10ms @ 5 VDC
Required I/O 4 %AQ
D/A Resolution 13 bits
Output Range :+/-10 VDC
Voltage Output Resolution 1.25 millivolts
Maximum Linearity Error ≥ 2 Kohms
Channel to Channel Isolation 1500 VAC (RMS), +/- 2000 VDC
Common Mode Isolation 1500 VAC (RMS), +/- 2000 VDC
Relative humidity 5% to 95%
Operating temperature 0 to 60oC
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the HE693DAC410?

Answer: Yes. We offer repairs for the HE693DAC410 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Horner Electric and HE693DAC410?

Answer: If you buy the HE693DAC410 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the HE693DAC410 online?

Answer: Yes. Automation Stop sells the HE693DAC410 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the HE693DAC410?

Answer: The HE693DAC410 is made by Horner Electric.


Question: What is the Channel to Channel Isolation of the HE693DAC410?

Answer: The HE693DAC410 has a Channel to Channel Isolation of 1500 VAC (voltage alternating current) (RMS), +/- 2000 VDC.


Question: What is the Common Mode Isolation of the HE693DAC410?

Answer: The Common Mode Isolation of the HE693DAC410 is 1500 voltage alternating current (VAC) (RMS), +/- 2000 VDC.


Question: What Current Surge on Power-up does the Allen Bradley/Rockwell Automation HE693DAC410 have?

Answer: The HE693DAC410 has a Current Surge on Power-up of 900 milliamperes for 300ms @24 VDC and 250 milliamperes for 10ms @ 5 VDC.


Question: What is the D/A Resolution of the Allen Bradley HE693DAC410?

Answer: The HE693DAC410 has a D/A Resolution of 13 bits.


Question: What is the Maximum Linearity Error of the HE693DAC410?

Answer: The Rockwell Automation HE693DAC410 has a Maximum Linearity Error of ≥ 2 Kohms.


Question: What is the Number of Channels of the Allen Bradley HE693DAC410?

Answer: The Allen Bradley HE693DAC410 has a Number of Channels of 4.


Question: What Operating temperature does the HE693DAC410 have?

Answer: The Operating temperature of the HE693DAC410 is 0 to 60oC.


Question: What is the Output Range of the Allen Bradley-Rockwell Automation HE693DAC410?

Answer: The Output Range of the Allen Bradley-Rockwell Automation HE693DAC410 is :+/-10 VDC.


Question: What is the Power Consumption of the HE693DAC410?

Answer: The HE693DAC410 has a Power Consumption of 120 milliampere @24 VDC and 100 milliamperes @5 VDC.


Question: What is the Relative humidity of the Allen Bradley/Rockwell Automation HE693DAC410?

Answer: The HE693DAC410 has a Relative humidity of 5% to 95%.


Question: What is the Required input/output of the HE693DAC410?

Answer: The Allen-Bradley HE693DAC410 has a Required input/output of 4 %AQ.


Question: What Voltage Output Resolution does the HE693DAC410 have?

Answer: The HE693DAC410 has a Voltage Output Resolution of 1.25 millivolts.


Series information for HE693DAC410

For additional information about HE693DAC410 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding HE693DAC410.

Revision Part # Also Known As Availability
HE693DAC410A HE693DAC410 Series A, Rev A Request a Quote

Common Misspellings:

  • HE693DAC41O
  • HE693DAC4I0
  • HE693DAC4IO
  • HEG93DAC410
  • HEG93DAC41O
  • HEG93DAC4I0
  • HEG93DAC4IO

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP