GE / IP FANUC Series 90/30 In Stock
IC200NAL211
✓ In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC200NAL211 |
| Series: | Versamax |
| UPC: | 978861395224 |
Description:
The IC200NAL211 is a Nano PLC that is manufactured by GE Fanuc. It belongs to the VersaMax family of products. The controller has six DC inputs, four relay outputs, and one analog input. For operation, it requires an external 24 VDC input power supply. At 24 VDC, the IC200NAL211 has a typical input current of 0.12 amperes. The six DC inputs have an input voltage range from 0 to 30 volts DC, while the analog input has an input range of 0 to 10 volts.
Key Features:
- features communication port: rs-232, rs-485
- operates at 24 volts dc for voltage
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC200NAL211 is a Nano PLC by GE Fanuc. It belongs to the Versamax family of products. It has six DC inputs and four relay outputs. Along with these, there is one analog input present on the controller. For operation, it needs 24 VDC input power. The inputs here can be used as standard inputs or high-speed counter inputs depending on the application, where each input can either have positive or negative logic characteristics. In standard mode, different input devices can be connected to it such as proximity switches, pushbuttons etc. There is also an analog input present for analog signals lying in the range of 0 to 10 V. The analog input has an 8-bit resolution. The four relay outputs are normally open and have the ability to control motor starters, solenoids, and indicators. The internally located relay coils are powered by a 24 V internal DC supply. They can be used as standard as well as high-speed counter outputs. The input current is typically 7.5 mA with an input impedance of 2.8 kΩ. At the front, there are LEDs that indicate the activity status. This controller is certified and meets the cULus and CE standards. This controller is compatible with many devices, therefore it finds many applications in different industries. It supports programming in different modes such as ladder diagrams and sequential charts. For serial communication, this controller has RS-232 and RS-485 serial ports. These ports support high-speed data transfers. All installation guidelines have to be properly followed for accurate results and performance.
FAQ
Question: Does Automation Stop offer repairs on the IC200NAL211?
Answer: Yes. We offer repairs for the IC200NAL211 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200NAL211?
Answer: If you buy the IC200NAL211 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200NAL211 online?
Answer: Yes. Automation Stop sells the IC200NAL211 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200NAL211?
Answer: The IC200NAL211 is made by Emerson - GE Fanuc.
Series information for IC200NAL211
For additional information about IC200NAL211 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200NAL211.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC200NAL211-BA | IC200NAL211 Series BA, Rev BA | Request a Quote |
| IC200NAL211-BD | IC200NAL211 Series BD, Rev BD | Request a Quote |
Common Misspellings:
- IC200NAL21I
- IC200NAL2I1
- IC200NAL2II
- IC20ONAL211
- IC20ONAL21I
- IC20ONAL2I1
- IC20ONAL2II
- IC2O0NAL211
- IC2O0NAL21I
- IC2O0NAL2I1
- IC2O0NAL2II
- IC2OONAL211
- IC2OONAL21I
- IC2OONAL2I1
- IC2OONAL2II
- 1C200NAL211
- 1C200NAL21I
- 1C200NAL2I1
- 1C200NAL2II
- 1C20ONAL211
- 1C20ONAL21I
- 1C20ONAL2I1
- 1C20ONAL2II
- 1C2O0NAL211
- 1C2O0NAL21I
- 1C2O0NAL2I1
- 1C2O0NAL2II
- 1C2OONAL211
- 1C2OONAL21I
- 1C2OONAL2I1
- 1C2OONAL2II
