GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC200MDL331 |
| Series: | Versamax |
| UPC: | 649641013576 |
Description:
The GE Fanuc Emerson IC200MDL331 is a Versamax output module that includes eight (8) channels. These outputs deliver a voltage of 120 volts AC. The device weighs approximately 450 grams (0.99 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC200MDL331 is a Versamax output module that includes eight (8) channels that deliver a voltage rating range from 85 volts AC to 132 volts AC at a frequency range from 47 hertz to 63 hertz and an output current of 2 amperes per point. These isolated outputs are labeled with green LED indicators to show the on/off status of outputs. The logical operation is achieved by connecting a CPU to this module. The module has an output voltage drop of 2 volts. This unit offers an on response time of 0.5 milliseconds and an off response time of 0.5 milliseconds. The processing can be performed by either NIU or a CPU. The device receives a discrete output data length of 8 bits.
The IC200MDL331 employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 250 volts AC continuously between logic and frame ground and 1500 volts AC for one minute. This output module has a minimum load current of 10 milliamperes for each point. The IC200MDL331 can be employed in many industrial applications such as solenoids, motor starters, and inductive loads. The module includes snubber and MOV circuit protection for each output. This module draws a current of 85 milliamperes at a voltage of +5 volts DC on the backplane with all outputs on the ON status. The IC200MDL331 weighs approximately 450 grams (0.99 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | VersaMax |
| Part Number | IC200MDL331 |
| Description | Output module |
| Number of I/O points | 8 isolated outputs |
| Outputs per module | 1 of eight outputs each |
| Rated voltage | 120 VAC |
| Output voltage range | 85 to 132 VAC (47 to 63Hz) |
| Isolation : User input to logic (optical) and frame ground/Group to group | 250VAC continuous; 1500VAC for 1 minute / N/A |
| Output current | 10 mA minimum per point / 2.0 A maximum per point |
| Output voltage drop | 2 V maximum |
| On response time | Less than ½ cycle |
| Off response time | Less than ½ cycle |
| Internal power consumption | 85 mA (all outputs on) from 5 volt bus on backplane |
| Operating temperature | 0 to 60 degrees C (32 to 140 degrees F) |
| Weight | 450 g (0.99 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC200MDL331?
Answer: Yes. We offer repairs for the IC200MDL331 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200MDL331?
Answer: If you buy the IC200MDL331 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200MDL331 online?
Answer: Yes. Automation Stop sells the IC200MDL331 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200MDL331?
Answer: The IC200MDL331 is made by Emerson - GE Fanuc.
Question: What Brand does the Rockwell-Automation IC200MDL331 have?
Answer: The IC200MDL331 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What Description is included with the Rockwell-Automation IC200MDL331?
Answer: The IC200MDL331 has a Output module Description.
Question: What Internal power consumption does the Allen Bradley IC200MDL331 have?
Answer: The IC200MDL331 has a Internal power consumption of 85 mA (all outputs on) from 5 volt bus on backplane.
Question: What is the Isolation : User input to logic (optical) and frame ground/Group to group of the IC200MDL331?
Answer: The IC200MDL331 has a Isolation : User input to logic (optical) and frame ground/Group to group of 250VAC continuous; 1500VAC for 1 minute / N/A.
Question: What is the Number of input/output points of the IC200MDL331?
Answer: The Allen Bradley Automation IC200MDL331 has a Number of input/output points of 8 isolated outputs.
Question: What Off response time is included with the Allen Bradley IC200MDL331?
Answer: The Allen Bradley IC200MDL331 has a Less than ½ cycle Off response time.
Question: What On response time does the IC200MDL331 have?
Answer: The IC200MDL331 has a Less than ½ cycle On response time.
Question: What is the Operating temperature of the IC200MDL331?
Answer: The Operating temperature of the IC200MDL331 is 0 to 60 degrees C (32 to 140 degrees F).
Question: What is the Output current of the Allen-Bradley IC200MDL331?
Answer: The IC200MDL331 has a Output current of 10 mA minimum per point / 2.0 A maximum per point.
Question: What Output voltage drop does the Allen-Bradley IC200MDL331 have?
Answer: The Output voltage drop of the Allen-Bradley IC200MDL331 is 2 V maximum.
Question: What is the Output voltage range of the IC200MDL331?
Answer: The Allen Bradley Automation IC200MDL331 has a Output voltage range of 85 to 132 VAC (voltage alternating current) (47 to 63Hz).
Question: What Outputs per module does the IC200MDL331 have?
Answer: The Outputs per module of the IC200MDL331 is 1 of eight outputs each.
Question: What component Number does the Allen Bradley/Rockwell Automation IC200MDL331 have?
Answer: The unit Number of the IC200MDL331 is IC200MDL331.
Question: What is the Rated voltage of the Allen Bradley-Rockwell Automation IC200MDL331?
Answer: The IC200MDL331 has a Rated voltage of 120 voltage alternating current (VAC).
Question: What Weight does the IC200MDL331 have?
Answer: The IC200MDL331 has a Weight of 450 g (0.99 lb).
Series information for IC200MDL331
For additional information about IC200MDL331 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200MDL331.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC200MDL331M | IC200MDL331 Series M, Rev M | Request a Quote |
Common Misspellings:
- IC200MDL33I
- IC20OMDL331
- IC20OMDL33I
- IC2O0MDL331
- IC2O0MDL33I
- IC2OOMDL331
- IC2OOMDL33I
- 1C200MDL331
- 1C200MDL33I
- 1C20OMDL331
- 1C20OMDL33I
- 1C2O0MDL331
- 1C2O0MDL33I
- 1C2OOMDL331
- 1C2OOMDL33I
