GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC200MDD849 |
Series: | Versamax |
UPC: | 98161033265 |
Description:
Part of the VersaMax family of products, the IC200MDD849 is a discrete input/output module that is manufactured by GE Fanuc. The module provides eight discrete inputs and eight relay outputs. The module has LEDs that indicate the status of each input and output point, as well as an OK indicator that signals when the module is receiving power from the backplane. The IC200MDD849 requires an input voltage range of 0 to 132 VAC, with 120 VAC being the nominal voltage.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC200MDD849 Module by GE Fanuc is a discrete input/output module. It belongs to the VersaMax family of products and is widely used in many different industrial applications. The module has the ability to provide eight discrete inputs. These inputs can either be positive logic inputs or sourcing type inputs that receive current from AC devices. There are eight relay outputs that have the ability to drive 2 A load per output. These are form-A type outputs and produce output logic bit 1 when the host central processing unit is in active mode. The relay type in this module is fixed coil and moving armature and the contacts are silver alloy material contacts. The CPU or NIU is responsible for the intelligent processing in the module. This module is powered by the backplane whereas loads have to be powered externally. The module draws a maximum current of 295 mA and does not support thermal derating. The input voltage is from 0 to 132 VAC at a frequency of 47 to 63 hertz. The nominal input voltage for this module is 120 V. There are different LEDs present for status indication of both input and output points. The OK LEDs are turned on when the module is properly powered. The module is to be installed by following all installation guidelines accurately so that proper results can be achieved. It is to be kept in mind that important protection features such as fuses and snubbers are not available in this particular model.
Question: Does Automation Stop offer repairs on the IC200MDD849?
Answer: Yes. We offer repairs for the IC200MDD849 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200MDD849?
Answer: If you buy the IC200MDD849 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200MDD849 online?
Answer: Yes. Automation Stop sells the IC200MDD849 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200MDD849?
Answer: The IC200MDD849 is made by Emerson - GE Fanuc.
Question: What voltage alternating current (VAC) is included with the Emerson - GE Fanuc IC200MDD849?
Answer: The IC200MDD849 by Emerson - GE Fanuc has a VAC (voltage alternating current) of 120.
For additional information about IC200MDD849 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200MDD849.
Revision Part # | Also Known As | Availability |
---|---|---|
IC200MDD849J | IC200MDD849 Series J, Rev J | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.