GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC200CHS112 |
Series: | Versamax |
UPC: | 535778400672 |
Description:
The IC200CHS112 is a type of Relay-Style Interposing I/O Terminal. It is designed and manufactured by GE Fanuc. It is meant to be used with the VersaMax series of products from GE Fanuc. Thanks to its dry contacts feature, it can switch high current outputs of as high as eight (8) amperes. A standard twenty-four (24) volt DC (direct current), 0.5 ampere VersaMax output module is required for interposing the I/O terminals.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC200CHS112 is a relay-style interposing I/O terminal. It belongs within the VersaMax product line by GE Fanuc. It can switch a high current of 8 amperes using the dry contact feature. In order to interpose the terminals, this module requires a 24 Volts Direct Current 0.5 Amperes VersaMax Output module. There is a different LED indicator light for each of the individual relay statuses. Furthermore, each Fuse label comes with a different LED Indicator. The indicator light helps with indicating specific points on this module. It comes with two different variations.
The GE Fanuc IC200CHS112 interposing relay-style I/O terminal comes with a main base (IC200CHS111), and an expansion base VersaMax (IC200CHS112). It is ideally used with 17-32 of the 32-point VersaMax module. For operations, it requires a J2 Connector. This J2 Connector helps establish a connection between the expansion connector to the ribbon cable. For both field input-output wiring connections and power connections, this module comes with support for 50 box-style terminals.
On this GE Fanuc IC200CHS112 relay-style interposing I/O terminal, an external 24 volts power supply is required. This power is especially required for powering the relay coils. The main base, as well as the expansion base, require this power supply. For the expansion base, terminal B17 & B18 is required for establishing an external power supply. For power, it requires a 24 Volt DC 0.5 amperes VersaMax output module.
For ease of use, the GE Fanuc IC200CHS112 relay-style interposing I/O terminal comes equipped with several LED indicators. By taking a look at the LED indicators, users can tell the specific points on this VersaMax output module.
Question: Does Automation Stop offer repairs on the IC200CHS112?
Answer: Yes. We offer repairs for the IC200CHS112 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200CHS112?
Answer: If you buy the IC200CHS112 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200CHS112 online?
Answer: Yes. Automation Stop sells the IC200CHS112 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200CHS112?
Answer: The IC200CHS112 is made by Emerson - GE Fanuc.
Question: What can I expect the amperage included with the IC200CHS112 to be?
Answer: The IC200CHS112 by Emerson - GE Fanuc has a amperage of 8.
For additional information about IC200CHS112 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200CHS112.
Revision Part # | Also Known As | Availability |
---|---|---|
IC200CHS112D | IC200CHS112 Series D, Rev D | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.