GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC200ALG320 |
| Series: | Versamax |
| UPC: | 693068554556 |
Description:
The IC200ALG320 is a 12-Bit, 4-Channel Analog Output Module manufactured by GE Fanuc and belongs to GE Fanuc VersaMax Series. The module offers four 4-to-20 milliampere analog output points.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Adding Items to Cart
Looking for a IC200ALG320? We can help!
Request a QuoteKey Features:
- has voltage of 18 to 30 vdc
- has output module
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC200ALG320 is a 4-Channel Current Sourcing Output Module that is manufactured by GE Fanuc Automation. This VersaMax Series module provides four 4 to 20 milliampere analog output points. It provides a modest amount of over range current; the output loads can get nearly 20.38 milliamperes of output current per channel. Configuring the IC200ALG320 during the setup is easy. For the outputs of the module to retain their last state, a jumper is used. If the backplane power or communication is interrupted or the PLC stops, the outputs use the default value. The outputs remain in the previous or default state until the modules receive different output or the field power is disconnected.
The IC200ALG320 is equipped with LED indicators. A green FLD power LED indicates the presence of user-provided power connected to the analog field side circuits. The OK LED indicator turns green when the module recognizes backplane power. The lowest load resistance per output channel of the IC200ALG320 depends on the external voltage, ambient temperature, positioning of the DIN rail, and module in the rack. It is recommended to use shielded twisted cables for all the connections of this current sourcing analog output module. If the installation of the module is on a terminal style or compact terminal style I/O carrier, the connections of the cable shield can be done directly to the carrier if it is compatible with the shield wiring. The IC200ALG320 module is compatible with the original VersaMax series NIUs and CPUs.
Technical Specifications
| Backplane Current Consumption | 5 Volts Output: 50 milliamperes, maximum |
| Current Consumption at Recommended Range | 160 milliamperes, maximum (including load current) |
| 12 Volt Operation Range | 9.6 to 15 Volts DC, 12 Volts DC nominal (including ripple) |
| Update Rate per Module | 0.3 milliseconds, maximum |
| Channels | 4 single-ended, one group |
| Power Consumption | 50 milliamperes from +5 Volt Bus |
| Current Range | 4 - 20 milliamperes |
| Voltage Range | 18 - 30 Volts DC |
| LED Indicators | FLD PWR, OK |
| 12 Volts Operation Range | 9.6 to 15 Volts DC |
FAQ
Question: Does Automation Stop offer repairs on the IC200ALG320?
Answer: Yes. We offer repairs for the IC200ALG320 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200ALG320?
Answer: If you buy the IC200ALG320 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200ALG320 online?
Answer: Yes. Automation Stop sells the IC200ALG320 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200ALG320?
Answer: The IC200ALG320 is made by Emerson - GE Fanuc.
Question: What is the 12 Volt Operation Range of the IC200ALG320?
Answer: The Allen-Bradley IC200ALG320 has a 12 Volt Operation Range of 9.6 to 15 Volts direct current (DC), 12 Volts direct current (DC) nominal (including ripple).
Question: What is the 12 Volts Operation Range of the IC200ALG320?
Answer: The 12 Volts Operation Range of the IC200ALG320 is 9.6 to 15 Volts DC.
Question: What Backplane Current Consumption does the Rockwell-Automation IC200ALG320 have?
Answer: The Backplane Current Consumption of the IC200ALG320 is 5 Volts Output: 50 milliamperes, maximum.
Question: What is the Channels of the IC200ALG320?
Answer: The Allen Bradley Automation IC200ALG320 has a Channels of 4 single-ended, one group.
Question: What is the Current Consumption at Recommended Range of the Rockwell Automation IC200ALG320?
Answer: The Rockwell Automation IC200ALG320 has a Current Consumption at Recommended Range of 160 milliamperes, maximum (including load current).
Question: What is the Current Range of the IC200ALG320?
Answer: The Current Range of the IC200ALG320 is 4 - 20 milliamperes.
Question: What kind of LED Indicators does the Allen Bradley Automation IC200ALG320 have?
Answer: The IC200ALG320 has LED Indicators FLD PWR, OK.
Question: What Power Consumption does the IC200ALG320 have?
Answer: The Allen Bradley IC200ALG320 has a Power Consumption of 50 milliamperes from +5 Volt Bus.
Question: What is the Update Rate per Module of the IC200ALG320?
Answer: The Update Rate per Module of the Allen Bradley/Rockwell Automation IC200ALG320 is 0.3 milliseconds, maximum.
Question: What Voltage Range does the Rockwell Automation IC200ALG320 have?
Answer: The Voltage Range of the IC200ALG320 is 18 - 30 Volts direct current.
Series information for IC200ALG320
For additional information about IC200ALG320 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200ALG320.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC200ALG320C | IC200ALG320 Series C, Rev C | Request a Quote |
| IC200ALG320E | IC200ALG320 Series E, Rev E | Request a Quote |
| IC200ALG320F | IC200ALG320 Series F, Rev F | Request a Quote |
| IC200ALG320J | IC200ALG320 Series J, Rev J | Request a Quote |
| IC200ALG320K | IC200ALG320 Series K, Rev K | Request a Quote |
| IC200ALG320M | IC200ALG320 Series M, Rev M | Request a Quote |
Common Misspellings:
- IC200ALG32O
- IC200AL6320
- IC200AL632O
- IC20OALG320
- IC20OALG32O
- IC20OAL6320
- IC20OAL632O
- IC2O0ALG320
- IC2O0ALG32O
- IC2O0AL6320
- IC2O0AL632O
- IC2OOALG320
- IC2OOALG32O
- IC2OOAL6320
- IC2OOAL632O
- 1C200ALG320
- 1C200ALG32O
- 1C200AL6320
- 1C200AL632O
- 1C20OALG320
- 1C20OALG32O
- 1C20OAL6320
- 1C20OAL632O
- 1C2O0ALG320
- 1C2O0ALG32O
- 1C2O0AL6320
- 1C2O0AL632O
- 1C2OOALG320
- 1C2OOALG32O
- 1C2OOAL6320
- 1C2OOAL632O
