GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC200ALG261

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC200ALG261
Series: Versamax
UPC: 250208251784

Description:

The GE Fanuc Emerson IC200ALG261 is an analog voltage input module. This module provides eight (8) differential channels. The IC200ALG261 weighs approximately 100 grams (0.22 pounds) while shipping.


Key Features:

  • utilizes power of backplane power supply

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$951.00

Available: 2

What is Original Packaging

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC200ALG261 is a VersaMax analog voltage input module that can be employed in many industrial applications. This module provides eight (8) differential voltage inputs that can convert an analog signal to a discrete signal with a resolution of 15 bits. These inputs support an input voltage range from -10 volts DC to 10 volts DC. This module draws a current of 200 milliamperes at a voltage of +5 volts DC. The IC200ALG261 has two green LED indicators on the faceplate to provide the diagnostic feature and show the current status, power, and user power state of this module. The device provides analog input data of 8 words. The inputs can be programmed and configured to either default or hold the last state operation.

The IC200ALG261 can be mounted in a terminal, compact terminal, or connector-style I/O by employing an auxiliary I/O terminal. The unit has an input impedance of 100 ohms and detects field power loss and open wires for each channel. The input module provides an accuracy of ± 0.3 percent at 25 degrees Celsius (77 degrees Fahrenheit ) and ± 1 percent maximum of full scale. The IC200ALG261 offers an update data rate of 7.5 milliseconds and employs the backplane optical isolation provided by optocouplers to offer electrical isolation of 250 volts AC continuously and 1500 volts AC for one minute between logic and frame ground. The IC200ALG261 weighs approximately 100 grams (0.22 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series VersaMax
Part Number IC200ALG261
Description Voltage analog input module
Number of channels 8 differential voltage channels, one group
Load requirement 200 mA at 5V
ADC resolution 15 bit ADC
Number of input range 1
Input voltage range -10 V to +10V
Analog input data 8 words
Channel data update rate 7.5 ms
Resolution 0.3125mV = 1 count
Operating modes Voltage mode
LED indicators OK LED
User input to logic and to frame ground 250VAC continuous; 1500VAC for 1 minute
Operating temperature 0°C to 60°C (32°F to 140°F)
Weight 100 g (0.22 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC200ALG261?

Answer: Yes. We offer repairs for the IC200ALG261 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC200ALG261?

Answer: If you buy the IC200ALG261 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC200ALG261 online?

Answer: Yes. Automation Stop sells the IC200ALG261 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC200ALG261?

Answer: The IC200ALG261 is made by Emerson - GE Fanuc.


Question: What is the ADC resolution of the Rockwell-Automation IC200ALG261?

Answer: The ADC resolution of the IC200ALG261 is 15 bit ADC.


Question: What is the Analog input data of the IC200ALG261?

Answer: The Analog input data of the IC200ALG261 is 8 words.


Question: What Brand is included with the Rockwell Automation IC200ALG261?

Answer: The IC200ALG261 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What is the Channel data update rate of the IC200ALG261?

Answer: The IC200ALG261 has a Channel data update rate of 7.5 ms.


Question: What Description is included with the IC200ALG261?

Answer: The Allen Bradley-Rockwell Automation IC200ALG261 has a Voltage analog input module Description.


Question: What is the Input voltage range of the IC200ALG261?

Answer: The Allen Bradley/Rockwell Automation IC200ALG261 has a Input voltage range of -10 V to +10V.


Question: What LED indicators are included with the Allen Bradley-Rockwell Automation IC200ALG261?

Answer: The IC200ALG261 has LED indicators OK LED.


Question: What is the Load requirement of the Allen-Bradley IC200ALG261?

Answer: The Load requirement of the IC200ALG261 is 200 mA at 5V.


Question: What is the Number of channels of the IC200ALG261?

Answer: The Number of channels of the Allen Bradley/Rockwell Automation IC200ALG261 is 8 differential voltage channels, one group.


Question: What is the Number of input range of the IC200ALG261?

Answer: The Number of input range of the Allen-Bradley IC200ALG261 is 1.


Question: What Operating modes are included with the Allen Bradley IC200ALG261?

Answer: The Allen Bradley IC200ALG261 has Operating modes Voltage mode.


Question: What Operating temperature does the Rockwell-Automation IC200ALG261 have?

Answer: The Rockwell-Automation IC200ALG261 has a Operating temperature of 0°C to 60°C (32°F to 140°F).


Question: What part Number does the IC200ALG261 have?

Answer: The unit Number of the IC200ALG261 is IC200ALG261.


Question: What is the Resolution of the IC200ALG261?

Answer: The Allen Bradley-Rockwell Automation IC200ALG261 has a Resolution of 0.3125mV = 1 count.


Question: What is the User input to logic and to frame ground of the IC200ALG261?

Answer: The User input to logic and to frame ground of the Allen Bradley/Rockwell Automation IC200ALG261 is 250VAC continuous; 1500VAC for 1 minute.


Question: What Weight does the Rockwell-Automation IC200ALG261 have?

Answer: The Rockwell-Automation IC200ALG261 has a Weight of 100 g (0.22 lb).


Series information for IC200ALG261

For additional information about IC200ALG261 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200ALG261.

Revision Part # Also Known As Availability
IC200ALG261C IC200ALG261 Series C, Rev C Request a Quote
IC200ALG261D IC200ALG261 Series D, Rev D Request a Quote
IC200ALG261F IC200ALG261 Series F, Rev F Request a Quote
IC200ALG261H IC200ALG261 Series H, Rev H Request a Quote
IC200ALG261J IC200ALG261 Series J, Rev J Request a Quote

Common Misspellings:

  • IC200ALG26I
  • IC200ALG2G1
  • IC200ALG2GI
  • IC200AL6261
  • IC200AL626I
  • IC200AL62G1
  • IC200AL62GI
  • IC20OALG261
  • IC20OALG26I
  • IC20OALG2G1
  • IC20OALG2GI
  • IC20OAL6261
  • IC20OAL626I
  • IC20OAL62G1
  • IC20OAL62GI
  • IC2O0ALG261
  • IC2O0ALG26I
  • IC2O0ALG2G1
  • IC2O0ALG2GI
  • IC2O0AL6261
  • IC2O0AL626I
  • IC2O0AL62G1
  • IC2O0AL62GI
  • IC2OOALG261
  • IC2OOALG26I
  • IC2OOALG2G1
  • IC2OOALG2GI
  • IC2OOAL6261
  • IC2OOAL626I
  • IC2OOAL62G1
  • IC2OOAL62GI
  • 1C200ALG261
  • 1C200ALG26I
  • 1C200ALG2G1
  • 1C200ALG2GI
  • 1C200AL6261
  • 1C200AL626I
  • 1C200AL62G1
  • 1C200AL62GI
  • 1C20OALG261
  • 1C20OALG26I
  • 1C20OALG2G1
  • 1C20OALG2GI
  • 1C20OAL6261
  • 1C20OAL626I
  • 1C20OAL62G1
  • 1C20OAL62GI
  • 1C2O0ALG261
  • 1C2O0ALG26I
  • 1C2O0ALG2G1
  • 1C2O0ALG2GI
  • 1C2O0AL6261
  • 1C2O0AL626I
  • 1C2O0AL62G1
  • 1C2O0AL62GI
  • 1C2OOALG261
  • 1C2OOALG26I
  • 1C2OOALG2G1
  • 1C2OOALG2GI
  • 1C2OOAL6261
  • 1C2OOAL626I
  • 1C2OOAL62G1
  • 1C2OOAL62GI

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP