GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC200UEX624 |
Series: | Versamax Micro |
UPC: | 402887767609 |
Description:
The GE Fanuc IC200UEX624 extension module has four analog expansion points and a current inrush length of one microsecond at thirty volts to notify the users in case the circuit has to be restored to standard conditions. This GE Fanuc-produced extension module has a one percent error limitation for a step input, as well as a 12-bit resolution. Moreover, this GE Fanuc device is equipped with LED indicators that show the module's operational status.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC200UEX624 extension module was designed, manufactured, and distributed by Emerson - GE Fanuc. This unit by GE Fanuc features a total of four (4) analog expansion points along with a current inrush duration of one (1) microsecond at thirty (30) volts to alert application engineers when the circuit needs to be stabilized to normal operating conditions. The input current of this module is 0.1 amperes, and the input voltage ranges from one hundred and five (105) to one hundred and twenty-five (125) volts of alternating current. Due to the connection point being placed on this unit's right side, extension to another expansion module in a large-scale system may be carried out to enhance flexibility. In addition to that, the output voltage requirements of this device may range from zero (0) to ten (10) volts, with a peak operating voltage of 10.23 volts.
This module includes two (2) single-sided non-isolated analog output channels that can utilize the block-transfer function in order to convert 4-digit binary values into analog signals. The output load on this module is ten (10) kilo-ohms at a voltage of ten (10) volts, allowing it to endure an irregular or aberrant main grid power supply while guaranteeing the safety of the device and the user and, at the same time, supporting the necessary application process. In terms of filter time, this GE Fanuc extension module offers a one (1) percentage-error tolerance for a step input and a twelve (12)-bit resolution. Aside from that, the unit also has LED indicators that reflect the functioning state of the module.
Question: Does Automation Stop offer repairs on the IC200UEX624?
Answer: Yes. We offer repairs for the IC200UEX624 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200UEX624?
Answer: If you buy the IC200UEX624 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200UEX624 online?
Answer: Yes. Automation Stop sells the IC200UEX624 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200UEX624?
Answer: The IC200UEX624 is made by Emerson - GE Fanuc.
For additional information about IC200UEX624 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200UEX624.
Revision Part # | Also Known As | Availability |
---|
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.