GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC200UEX211

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC200UEX211
Series: Versamax Micro

Description:

The IC200UEX211 is a VersaMax Micro PLC 28-Point Expansion Unit by GE Fanuc. It has 16 24-Volt DC positive/negative logic input circuits and 12 normally open 2 Ampere relay circuits. This hardware has an input power supply rating of 26 Volt-amperes.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC200UEX211 by GE Fanuc is a VersaMax Micro PLC 28-Point Expansion Unit. This unit has 16 24-Volt DC positive/negative logic input circuits and 12 normally open 2 Ampere relay circuits. The IC200UEX211 has an input power supply rating of 26 Volt-amperes and a +24 Volt DC output power supply of 200 milliamperes maximum (for input circuits and user devices). AC power specifications for the IC200UEX211 include a range of 100-15% to 240+10% Volts AC and a frequency of 50-5% to 60+5% Hertz. Hold-up for the IC200UEX211 is 10 milliseconds at 85 to 100 Volts AC, 20 milliseconds at 100 to 265 Volts AC. It has an inrush current of 30 Amperes maximum at 200 Volts AC, 40 Amperes maximum at 265 Volts AC. The IC200UEX211 has an inrush time of 2 milliseconds for 40 Amperes and an input current of 0.20 Amperes typical at 200 Volts AC, 0.10 Amperes typical at 100 Volts AC.

DC input specifications for the IC200UEX211 include 16 inputs, a rated input voltage of 24 Volts DC, and an input voltage range of 0 to 30 Volts DC. Additional DC input specifications include an input current of 7.5 milliamperes typical and an input resistance of 2.8 Kiloohms; response time is 0.5 to 20 milliseconds configurable. The IC200UEX211 has an isolation voltage of 1500 Volts RMS field side to logic side, 500 Volts RMS between groups. Relay output specifications include an operating voltage of 5 to 30 Volts DC or 5 to 250 Volts AC. Leakage current for this hardware is 15 milliamperes at 240 Volts AC maximum, while minimum load is 10 milliamperes.

Technical Specifications

Brand: GE Fanuc
Inputs: 16
Outputs: 12
Input Power Supply Rating: 26 Volt-amperes
#ERROR! 200 Milliamperes Maximum
Frequency: 50-5% to 60+5% Hertz
Inrush Time: 2 Milliseconds for 40 Amperes
Rated Input Voltage: 24 Volts DC
Input Voltage Range: 0 to 30 Volts DC
Input Current: 7.5 Milliamperes Typical
Input Resistance: 2.8 Kiloohms
Response Time: 0.5 to 20 Milliseconds Configurable
Isolation Voltage: 1500 Volts RMS field side to logic side, 500 Volts RMS between groups
Operating Voltage: 5 to 30 Volts DC or 5 to 250 Volts AC
Leakage Current: 15 Milliamperes at 240 Volts AC Maximum
Minimum Load: 10 Milliamperes
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC200UEX211?

Answer: Yes. We offer repairs for the IC200UEX211 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC200UEX211?

Answer: If you buy the IC200UEX211 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC200UEX211 online?

Answer: Yes. Automation Stop sells the IC200UEX211 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC200UEX211?

Answer: The IC200UEX211 is made by Emerson - GE Fanuc.


Question: What is the #ERROR! of the IC200UEX211?

Answer: The #ERROR! of the IC200UEX211 is 200 Milliamperes Maximum.


Question: What Brand: is included with the Allen-Bradley IC200UEX211?

Answer: The Allen-Bradley IC200UEX211 has a GE Fanuc Brand:.


Question: What is the Frequency: of the IC200UEX211?

Answer: The Allen Bradley-Rockwell Automation IC200UEX211 has a Frequency: of 50-5% to 60+5% Hertz.


Question: What Input Current: does the Rockwell-Automation IC200UEX211 have?

Answer: The Input Current: of the Rockwell-Automation IC200UEX211 is 7.5 Milliamperes Typical.


Question: What is the Input power supply Rating: of the IC200UEX211?

Answer: The Input power supply component Rating: of the IC200UEX211 is 26 Volt-amperes.


Question: What is the Input Resistance: of the IC200UEX211?

Answer: The Input Resistance: of the IC200UEX211 is 2.8 Kiloohms.


Question: What is the Input Voltage Range: of the IC200UEX211?

Answer: The Input Voltage Range: of the IC200UEX211 is 0 to 30 Volts DC.


Question: What is the Inputs: of the Allen Bradley-Rockwell Automation IC200UEX211?

Answer: The Inputs: of the IC200UEX211 is 16.


Question: What is the Inrush Time: of the IC200UEX211?

Answer: The IC200UEX211 has a Inrush Time: of 2 Milliseconds for 40 Amperes.


Question: What Isolation Voltage: does the IC200UEX211 have?

Answer: The Rockwell Automation IC200UEX211 has a Isolation Voltage: of 1500 Volts RMS field side to logic side, 500 Volts RMS between groups.


Question: What is the Leakage Current: of the IC200UEX211?

Answer: The Leakage Current: of the Rockwell-Automation IC200UEX211 is 15 Milliamperes at 240 Volts alternating current (AC) Maximum.


Question: What Minimum Load: does the Allen-Bradley IC200UEX211 have?

Answer: The IC200UEX211 has a Minimum Load: of 10 Milliamperes.


Question: What is the Operating Voltage: of the Allen Bradley Automation IC200UEX211?

Answer: The Allen Bradley Automation IC200UEX211 has a Operating Voltage: of 5 to 30 Volts direct current or 5 to 250 Volts AC (alternating current).


Question: What is the Outputs: of the IC200UEX211?

Answer: The Outputs: of the Allen Bradley Automation IC200UEX211 is 12.


Question: What Rated Input Voltage: does the IC200UEX211 have?

Answer: The IC200UEX211 has a Rated Input Voltage: of 24 Volts DC (direct current).


Question: What is the Response Time: of the IC200UEX211?

Answer: The Response Time: of the IC200UEX211 is 0.5 to 20 Milliseconds Configurable.


Series information for IC200UEX211

For additional information about IC200UEX211 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200UEX211.

Revision Part # Also Known As Availability
IC200UEX211B IC200UEX211 Series B, Rev B Request a Quote
IC200UEX211D IC200UEX211 Series D, Rev D Request a Quote

Common Misspellings:

  • IC200UEX21I
  • IC200UEX2I1
  • IC200UEX2II
  • IC20OUEX211
  • IC20OUEX21I
  • IC20OUEX2I1
  • IC20OUEX2II
  • IC2O0UEX211
  • IC2O0UEX21I
  • IC2O0UEX2I1
  • IC2O0UEX2II
  • IC2OOUEX211
  • IC2OOUEX21I
  • IC2OOUEX2I1
  • IC2OOUEX2II
  • 1C200UEX211
  • 1C200UEX21I
  • 1C200UEX2I1
  • 1C200UEX2II
  • 1C20OUEX211
  • 1C20OUEX21I
  • 1C20OUEX2I1
  • 1C20OUEX2II
  • 1C2O0UEX211
  • 1C2O0UEX21I
  • 1C2O0UEX2I1
  • 1C2O0UEX2II
  • 1C2OOUEX211
  • 1C2OOUEX21I
  • 1C2OOUEX2I1
  • 1C2OOUEX2II

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP