GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC200UDR140

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC200UDR140
Series: Versamax Micro

Description:

The IC200UDR140 is a VersaMax 40-Point Micro PLC by GE Fanuc. It has 24, 24-Volt DC positive/negative logic input circuits and 16, normally open 2-Ampere relay output circuits. This hardware has a +24 Volt DC output power supply of 435 milliamperes maximum (for input circuits and user devices).



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC200UDR140 by GE Fanuc is a VersaMax 40-Point Micro PLC. It has 24, 24-Volt DC positive/negative logic input circuits and 16, normally open 2-Ampere relay output circuits. The IC200UDR140 has a +24 Volt DC output power supply of 435 milliamperes maximum for input circuits and user devices. The IC200UDR140 has a +5 Volt DC serial port output of 100 milliamperes maximum. Power supply specifications for the IC200UDR140 include a range of 100-15% to 240+10% Volts AC and a frequency of 50-5% to 60+5% Hertz. Hold-up is 10 milliseconds at 85 to 100 Volts AC, 20 milliseconds at 100 to 265 Volts AC. This hardware has an inrush current of 30 Amperes maximum at 200 Volts AC and an inrush time of 2 milliseconds for 40 Amperes. Input current is 0.20 Amperes typical at 200 Volts AC and input power supply rating is 26 Volt-amperes.

DC input specifications for the IC200UDR140 include a rated input voltage of 24 Volts DC and an input voltage range of 0 to 30 Volts DC; input current at 24 Volts DC is 8 milliamperes typical for I1, I3, I5, I7 and 4.8 milliamperes typical for all other inputs. Input threshold voltage is 18 Volts DC minimum in the ‘on’ setting and 5 Volts DC maximum in the ‘off’ setting. Response time is 1 millisecond to 20 milliseconds configurable as regular input; 100 micro-seconds at HSC input. The IC200UDR140 has an isolation voltage of 1500 RMS field side to logic side, 500 Volts RMS between groups. This PLC has a maximum counter frequency of 100 KiloHertz and an input voltage of 18 Volts in the ‘on’ position, 5 Volts in the ‘off’ position. Relay output specifications include an operating voltage of 5 to 30 Volts DC or 5 to 250 Volts AC. Leakage current is 15 milliamperes at 240 Volts AC (maximum), while minimum load is 10 milliamperes.

Technical Specifications

Brand: GE Fanuc
Inputs: 24, 24-Volt DC Positive/Negative Logic Input Circuits
Outputs: 16, Normally Open 2-Ampere Relay Output Circuits
#ERROR! 100 Milliamperes Maximum
Power Supply Range: 100-15% to 240+10% Volts AC
Frequency: 50-5% to 60+5% Hertz
Inrush Current: 30 Amperes (Maximum) at 200 Volts AC
Inrush Time: 2 Milliseconds for 40 Amperes
Input Current: 0.20 Amperes Typical at 200 Volts AC
Input Power Supply Rating: 26 Volt-amperes
Rated Input Voltage: 24 Volts DC
Input Voltage Range: 0 to 30 Volts DC
Response Time: 1 Millisecond to 20 Milliseconds
Isolation Voltage: 1500 RMS Field Side to Logic Side, 500 Volts RMS Between Groups
Maximum Counter Frequency: 100 kiloHertz
Operating Voltage: 5 to 30 Volts DC or 5 to 250 Volts AC
Leakage Current: 15 Milliamperes at 240 Volts AC (Maximum)
Minimum Load: 10 Milliamperes
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC200UDR140?

Answer: Yes. We offer repairs for the IC200UDR140 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC200UDR140?

Answer: If you buy the IC200UDR140 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC200UDR140 online?

Answer: Yes. Automation Stop sells the IC200UDR140 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC200UDR140?

Answer: The IC200UDR140 is made by Emerson - GE Fanuc.


Question: What #ERROR! does the Rockwell Automation IC200UDR140 have?

Answer: The IC200UDR140 has a #ERROR! of 100 Milliamperes Maximum.


Question: What Brand: is included with the Allen Bradley-Rockwell Automation IC200UDR140?

Answer: The Allen Bradley-Rockwell Automation IC200UDR140 has a GE Fanuc Brand:.


Question: What Frequency: does the IC200UDR140 have?

Answer: The Allen Bradley Automation IC200UDR140 has a Frequency: of 50-5% to 60+5% Hertz.


Question: What Input Current: does the Allen Bradley IC200UDR140 have?

Answer: The IC200UDR140 has a Input Current: of 0.20 Amperes Typical at 200 Volts AC (alternating current).


Question: What Input power supply Rating: does the Allen Bradley IC200UDR140 have?

Answer: The IC200UDR140 has a Input power supply unit Rating: of 26 Volt-amperes.


Question: What is the Input Voltage Range: of the IC200UDR140?

Answer: The Input Voltage Range: of the Rockwell Automation IC200UDR140 is 0 to 30 Volts DC.


Question: What is the Inputs: of the IC200UDR140?

Answer: The Inputs: of the IC200UDR140 is 24, 24-Volt direct current Positive/Negative Logic Input Circuits.


Question: What Inrush Current: does the Rockwell-Automation IC200UDR140 have?

Answer: The Inrush Current: of the Rockwell-Automation IC200UDR140 is 30 Amperes (Maximum) at 200 Volts alternating current (AC).


Question: What is the Inrush Time: of the Allen Bradley-Rockwell Automation IC200UDR140?

Answer: The Inrush Time: of the IC200UDR140 is 2 Milliseconds for 40 Amperes.


Question: What Isolation Voltage: does the IC200UDR140 have?

Answer: The Allen Bradley-Rockwell Automation IC200UDR140 has a Isolation Voltage: of 1500 RMS Field Side to Logic Side, 500 Volts RMS Between Groups.


Question: What is the Leakage Current: of the IC200UDR140?

Answer: The Leakage Current: of the IC200UDR140 is 15 Milliamperes at 240 Volts AC (alternating current) (Maximum).


Question: What Maximum Counter Frequency: does the Allen-Bradley IC200UDR140 have?

Answer: The Allen-Bradley IC200UDR140 has a Maximum Counter Frequency: of 100 kiloHertz.


Question: What Minimum Load: does the Allen Bradley Automation IC200UDR140 have?

Answer: The Allen Bradley Automation IC200UDR140 has a Minimum Load: of 10 Milliamperes.


Question: What is the Operating Voltage: of the IC200UDR140?

Answer: The Operating Voltage: of the Rockwell-Automation IC200UDR140 is 5 to 30 Volts DC or 5 to 250 Volts alternating current (AC).


Question: Does the Rockwell Automation IC200UDR140 have a Outputs:?

Answer: 16, Normally Open 2-Ampere Relay Output Circuits.


Question: What power supply component Range: does the Allen Bradley/Rockwell Automation IC200UDR140 have?

Answer: The Allen Bradley/Rockwell Automation IC200UDR140 has a power supply component Range: of 100-15% to 240+10% Volts AC (alternating current).


Question: What Rated Input Voltage: does the Rockwell-Automation IC200UDR140 have?

Answer: The Rockwell-Automation IC200UDR140 has a Rated Input Voltage: of 24 Volts DC (direct current).


Question: What Response Time: does the Rockwell Automation IC200UDR140 have?

Answer: The Response Time: of the IC200UDR140 is 1 Millisecond to 20 Milliseconds.


Series information for IC200UDR140

For additional information about IC200UDR140 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200UDR140.

Revision Part # Also Known As Availability

Common Misspellings:

  • IC200UDR14O
  • IC200UDRI40
  • IC200UDRI4O
  • IC20OUDR140
  • IC20OUDR14O
  • IC20OUDRI40
  • IC20OUDRI4O
  • IC2O0UDR140
  • IC2O0UDR14O
  • IC2O0UDRI40
  • IC2O0UDRI4O
  • IC2OOUDR140
  • IC2OOUDR14O
  • IC2OOUDRI40
  • IC2OOUDRI4O
  • 1C200UDR140
  • 1C200UDR14O
  • 1C200UDRI40
  • 1C200UDRI4O
  • 1C20OUDR140
  • 1C20OUDR14O
  • 1C20OUDRI40
  • 1C20OUDRI4O
  • 1C2O0UDR140
  • 1C2O0UDR14O
  • 1C2O0UDRI40
  • 1C2O0UDRI4O
  • 1C2OOUDR140
  • 1C2OOUDR14O
  • 1C2OOUDRI40
  • 1C2OOUDRI4O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP