GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC200UDR010 |
| Series: | Versamax Micro |
| UPC: | 619316198372 |
Description:
The IC200UDR010 is a Power Supply Module manufactured by GE Fanuc Automation as a part of the VersaMax Micro Series of PLCs. It can be used with sixteen (16) DC inputs and includes eleven (11) normally open and one DC output.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC200UDR010 is a Power Supply Module from GE Fanuc Automation manufactured as a part of the VersaMax Micro Series of PLCs. This power supply can be used with sixteen (16) DC inputs and provides one DC output while eleven (11) normally open outputs operating with a current rating of 2 Amperes. It uses an input power of 24 Volts DC and provides one (1) DC output that provides an output voltage of 24 Volts DC and a current of 450 milliamperes. The 16 inputs of the IC200UDR010 power supply module are easily configurable. Different input equipment can be connected to the module through these 16 inputs and this equipment can operate with positive or negative logic, as per the application requirements.
The IC200UDR010 power supply module requires a larger amount of current during the start up than in its regular operation. Two (2) Amperes of current are required to start the module’s DC power supply. Users can configure to disable the power up diagnostics. However, it is not recommended as the diagnostics can provide insights about the state of the module and the power supply. The IC200UDR010 includes eleven (11) relay outputs for controlling different loads but these outputs cannot be used as PWM or pulse train outputs. This power supply module weighs around 500 grams and does not require any type of derating when all the required environmental conditions are present. This power supply module has an input power supply rating of 8 Watts. It also has 10 milliseconds of inrush time when operating with a current rating of 1 Ampere. The input resistance rating of the module is 2800 Ohms.
Technical Specifications
| Current Rating | 2 Amperes |
| Power Supply | 24 Volts DC |
| Range | 24 Volts DC- 20%, + 25% |
| Inrush Time | 10 milliseconds for 1 Ampere |
| Input Power Supply Rating | 8 Watts |
| Number of Inputs | 16 |
| Input Voltage Range | Zero (0) to 30 Volts DC |
| Response Time | 0.5 to 20 milliseconds |
| Output Voltage Drop | 0.3 Volts DC |
| Input Resistance | 2.8K Ohms |
| Input Current | 7.5 milliamperes, typical |
FAQ
Question: Does Automation Stop offer repairs on the IC200UDR010?
Answer: Yes. We offer repairs for the IC200UDR010 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200UDR010?
Answer: If you buy the IC200UDR010 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200UDR010 online?
Answer: Yes. Automation Stop sells the IC200UDR010 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200UDR010?
Answer: The IC200UDR010 is made by Emerson - GE Fanuc.
Question: What Current Rating does the Allen-Bradley IC200UDR010 have?
Answer: The Allen-Bradley IC200UDR010 has a Current Rating of 2 Amperes.
Question: What Input Current does the IC200UDR010 have?
Answer: The Input Current of the Rockwell-Automation IC200UDR010 is 7.5 milliamperes, typical.
Question: What is the Input power supply component Rating of the IC200UDR010?
Answer: The Input power supply unit Rating of the Allen-Bradley IC200UDR010 is 8 Watts.
Question: What Input Resistance does the Rockwell-Automation IC200UDR010 have?
Answer: The Rockwell-Automation IC200UDR010 has a Input Resistance of 2.8K Ohms.
Question: What is the Input Voltage Range of the IC200UDR010?
Answer: The Input Voltage Range of the IC200UDR010 is Zero (0) to 30 Volts DC (direct current).
Question: What is the Inrush Time of the Allen Bradley-Rockwell Automation IC200UDR010?
Answer: The Inrush Time of the IC200UDR010 is 10 milliseconds for 1 Ampere.
Question: What Number of Inputs does the IC200UDR010 have?
Answer: The IC200UDR010 has a Number of Inputs of 16.
Question: What Output Voltage Drop does the Rockwell Automation IC200UDR010 have?
Answer: The IC200UDR010 has a Output Voltage Drop of 0.3 Volts DC.
Question: What is the power supply of the IC200UDR010?
Answer: The power supply component of the IC200UDR010 is 24 Volts direct current.
Question: What is the Range of the Rockwell Automation IC200UDR010?
Answer: The Range of the IC200UDR010 is 24 Volts DC (direct current)- 20%, + 25%.
Question: What Response Time does the IC200UDR010 have?
Answer: The Allen Bradley Automation IC200UDR010 has a Response Time of 0.5 to 20 milliseconds.
Series information for IC200UDR010
For additional information about IC200UDR010 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200UDR010.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC200UDR010-CH | IC200UDR010 Series CH, Rev CH | Request a Quote |
| IC200UDR010-CJ | IC200UDR010 Series CJ, Rev CJ | Request a Quote |
| IC200UDR010-DJ | IC200UDR010 Series DJ, Rev DJ | Request a Quote |
| IC200UDR010-EK | IC200UDR010 Series EK, Rev EK | Request a Quote |
Common Misspellings:
- IC200UDR01O
- IC200UDR0I0
- IC200UDR0IO
- IC200UDRO10
- IC200UDRO1O
- IC200UDROI0
- IC200UDROIO
- IC20OUDR010
- IC20OUDR01O
- IC20OUDR0I0
- IC20OUDR0IO
- IC20OUDRO10
- IC20OUDRO1O
- IC20OUDROI0
- IC20OUDROIO
- IC2O0UDR010
- IC2O0UDR01O
- IC2O0UDR0I0
- IC2O0UDR0IO
- IC2O0UDRO10
- IC2O0UDRO1O
- IC2O0UDROI0
- IC2O0UDROIO
- IC2OOUDR010
- IC2OOUDR01O
- IC2OOUDR0I0
- IC2OOUDR0IO
- IC2OOUDRO10
- IC2OOUDRO1O
- IC2OOUDROI0
- IC2OOUDROIO
- 1C200UDR010
- 1C200UDR01O
- 1C200UDR0I0
- 1C200UDR0IO
- 1C200UDRO10
- 1C200UDRO1O
- 1C200UDROI0
- 1C200UDROIO
- 1C20OUDR010
- 1C20OUDR01O
- 1C20OUDR0I0
- 1C20OUDR0IO
- 1C20OUDRO10
- 1C20OUDRO1O
- 1C20OUDROI0
- 1C20OUDROIO
- 1C2O0UDR010
- 1C2O0UDR01O
- 1C2O0UDR0I0
- 1C2O0UDR0IO
- 1C2O0UDRO10
- 1C2O0UDRO1O
- 1C2O0UDROI0
- 1C2O0UDROIO
- 1C2OOUDR010
- 1C2OOUDR01O
- 1C2OOUDR0I0
- 1C2OOUDR0IO
- 1C2OOUDRO10
- 1C2OOUDRO1O
- 1C2OOUDROI0
- 1C2OOUDROIO
