GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC200UDR002 |
Series: | Versamax Micro |
UPC: | 147486625331 |
Description:
Part number IC200UDR002 is a VersaMax Micro 14-point programmable logic controller. This device was designed and manufactured by Emerson - GE Fanuc. This programmable logic controller operates on a power supply rated at 24 volts DC for normal duty operations. This device has eight (8) DC inputs, as well as six (6) normally open (NO) outputs. This device has an operating voltage of 5 to 30 volts DC or 5 to 250 volts AC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC200UDR002 is a VersaMax Micro 14-point programmable logic controller that was designed and manufactured by Emerson - GE Fanuc. This micro PLC controller operates on a 24 volts DC power supply for normal duty operations. This micro PLC features 8 DC inputs and has six (6) normally open (NO) outputs. This module also has a barrier style terminal strip. This strip includes a protective cover for added safety. Its open relay outputs form a single pole single throw relay output that can also be set as HCS outputs. The contact life of the relays is estimated to be around twenty million (20,000,000) mechanical operations of contact life. The controller includes LEDs (light emitting diodes) on the PLC module to provide visual status updates for the module. These LED features enable human-machine interaction and let users track the module's operations. Its compact, robust construction provides long-term durability and efficiency throughout the application process. In addition, it is an excellent choice for low-end motion applications, including material handling, packaging, and other manufacturing sectors.
For communication purposes, this module has an RS-232 interface port that supports slave protocol for network inter connectivity. Besides that, this VersaMax Micro controller supports serial I/O (SNP- SNPX) protocols and their memory protection switches. Additionally, this controller can provide support for expansion units offering extended operations. This control can be used as a high-speed counter device by the users. These counters, for example, can analyze up to 10 kilohertz of rapid-pulse data for several industrial process control, such as meter verification and the handling of materials.
Question: Does Automation Stop offer repairs on the IC200UDR002?
Answer: Yes. We offer repairs for the IC200UDR002 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200UDR002?
Answer: If you buy the IC200UDR002 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200UDR002 online?
Answer: Yes. Automation Stop sells the IC200UDR002 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200UDR002?
Answer: The IC200UDR002 is made by Emerson - GE Fanuc.
For additional information about IC200UDR002 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200UDR002.
Revision Part # | Also Known As | Availability |
---|---|---|
IC200UDR002-EL | IC200UDR002 Series EL, Rev EL | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.