GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC697MDL341 |
| Series: | Series 90-70 |
| UPC: | 195555648583 |
Description:
The GE Fanuc Emerson IC697MDL341 is an output module that includes twelve outputs that deliver a voltage of either 120 volts AC or 240 volts AC. These module outputs are individually well-isolated and labeled with green LED indicators. The IC697MDL341 weighs approximately 910 grams (2 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Adding Items to Cart
Looking for a IC697MDL341? We can help!
Request a QuotePay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC697MDL341 is an output module that includes twelve output points that deliver a voltage rating range from 85 volts AC to 264 volts AC at a frequency range from 47 hertz to 63 hertz. The module outputs are labeled with green LED indicators to show the on/off status of outputs. This module employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 500 volts AC continuously between logic and field sides and 1500 volts AC for one minute. The IC697MDL341 can be easily mounted in any input or output slots of the Field Control system. The output module provides an on response time of 1 millisecond and an off response time of 0.5 milliseconds. The module has another LED indicator labeled “FUSE OK” that indicates the fuse state of outputs. This device can be employed with Series 90-70 PLCs for incandescent and inductive loads.
The IC697MDL341 draws a current of 250 milliamperes at a backplane voltage of 5 volts DC. The module outputs deliver a current of 2 amperes per point. The IC697MDL341 has an output voltage drop of 1.5 volts and a leakage current from 3 milliamperes at 120 volts AC to 6 milliamperes at 240 volts AC. This output module doesn’t require DIP switches or jumpers to be programmed and configured. This device can be programmed and configured with either MS-DOS or Windows through either the Ethernet TCP/IP or the SNP port. The module groups have a fuse with a current rating of 3.15 amperes. The device supports an inrush current of 20 amperes for 20 milliseconds. The IC697MDL341 weighs approximately 910 grams (2 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | 90-70 |
| Part Number | IC697MDL341 |
| Description | Discrete output module |
| Number of I/O Points | 12 outputs |
| Output groups | 12 |
| Rated voltage | 120/240 volts AC |
| Output voltage range | 85–264 VAC (47–63 Hz) |
| Isolation | 1500 volts any output to backplane / 500 volts between points |
| Output current | 2 amps maximum per point / 16 amps maximum per module |
| Output voltage drop | 1.5 volts |
| Output leakage current | 3 mA maximum at 120 volts AC / 6 mA maximum at 240 volts AC |
| Inrush current | 20 A for 20 mS |
| Internal power consumption | 250 mA maximum from 5 volt bus on backplane |
| Weight | 910 g (2 lb.) |
FAQ
Question: Does Automation Stop offer repairs on the IC697MDL341?
Answer: Yes. We offer repairs for the IC697MDL341 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC697MDL341?
Answer: If you buy the IC697MDL341 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC697MDL341 online?
Answer: Yes. Automation Stop sells the IC697MDL341 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC697MDL341?
Answer: The IC697MDL341 is made by Emerson - GE Fanuc.
Question: What Brand does the IC697MDL341 have?
Answer: The Rockwell-Automation IC697MDL341 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What Description is included with the Allen-Bradley IC697MDL341?
Answer: The IC697MDL341 has a Discrete output module Description.
Question: What Inrush current does the IC697MDL341 have?
Answer: The Allen Bradley-Rockwell Automation IC697MDL341 has a Inrush current of 20 A for 20 mS.
Question: What Internal power consumption does the IC697MDL341 have?
Answer: The IC697MDL341 has a Internal power consumption of 250 mA maximum from 5 volt bus on backplane.
Question: What is the Isolation of the IC697MDL341?
Answer: The IC697MDL341 has a Isolation of 1500 volts any output to backplane / 500 volts between points.
Question: What Number of input/output Points does the IC697MDL341 have?
Answer: The Number of input/output Points of the IC697MDL341 is 12 outputs.
Question: What is the Output current of the IC697MDL341?
Answer: The Output current of the Allen Bradley Automation IC697MDL341 is 2 amperes maximum per point / 16 amperes maximum per module.
Question: What is the Output groups of the Allen Bradley-Rockwell Automation IC697MDL341?
Answer: The Allen Bradley-Rockwell Automation IC697MDL341 has a Output groups of 12.
Question: What Output leakage current does the Allen Bradley/Rockwell Automation IC697MDL341 have?
Answer: The IC697MDL341 has a Output leakage current of 3 mA maximum at 120 volts AC (alternating current) / 6 mA maximum at 240 volts AC (alternating current).
Question: What is the Output voltage drop of the IC697MDL341?
Answer: The Allen Bradley Automation IC697MDL341 has a Output voltage drop of 1.5 volts.
Question: What is the Output voltage range of the IC697MDL341?
Answer: The Allen Bradley IC697MDL341 has a Output voltage range of 85–264 VAC (voltage alternating current) (47–63 Hz).
Question: What is the part Number of the IC697MDL341?
Answer: The component Number of the IC697MDL341 is IC697MDL341.
Question: What is the Rated voltage of the Allen-Bradley IC697MDL341?
Answer: The Allen-Bradley IC697MDL341 has a Rated voltage of 120/240 volts alternating current (AC).
Question: What Weight does the Allen Bradley/Rockwell Automation IC697MDL341 have?
Answer: The IC697MDL341 has a Weight of 910 g (2 lb.).
Series information for IC697MDL341
For additional information about IC697MDL341 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697MDL341.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC697MDL341D | IC697MDL341 Series D, Rev D | Request a Quote |
| IC697MDL341C | IC697MDL341 Series C, Rev C | Request a Quote |
| IC697MDL341E | IC697MDL341 Series E, Rev E | Request a Quote |
Common Misspellings:
- IC697MDL34I
- ICG97MDL341
- ICG97MDL34I
- 1C697MDL341
- 1C697MDL34I
- 1CG97MDL341
- 1CG97MDL34I
