GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC697CPU731 |
Series: | Series 90-70 |
UPC: | 799705794924 |
Description:
Part number IC697CPU731 is a single slot central processing unit (CPU) by GE Fanuc. It supports any mixture of 512 Inputs / Outputs (I/O) and up to 8K analog I/O modules. This device has a 32-kilobyte CMOS memory and a scan rate of 0.4 microseconds per Boolean function. the processing speed of this CPU is 12 megahertz. This device has one (1) RS-422/485 serial port. It also has three (3) status LEDs. This CPU has a rated current consumption of 1 ampere at 5 volts.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
GE Fanuc's IC697CPU731 is a central processing unit (CPU). It is a programmable logic controller (PLC) CPU with a single slot that is installed in a PLC rack. It is designed and configured to conduct real-time control of machines, processes, and material handling systems using programming tools via an Ethernet TCP/IP or SNP port. This device can support up to 8K analog Input / Output modules. It has a battery-backed CMOS memory of 32 kilobytes. It has a scan rate of 0.4 microseconds per Boolean function. It supports a total of 512 input and output points. It has an 80C186 CPU that operates at a clock speed of twelve (12) megahertz. It supports IC 697 LAN interface modules. It also supports bus switching controller modules, such as IC660 and IC661. This processor comes with a three-position switch. Either this switch or programming software can be used to operate this device. This product has one (1) RS-422/485 serial port. This serial port offers a serial connection to a programmer. This CPU has a lithium battery. When the CPU's power is turned off, this battery maintains the software and data memory, as well as runs the calendar clock. This battery may be replaced. It has ten (10) years of battery shelf life at 20 degrees Celsius. The CPU consumes one (1.0) ampere of current at five (5) volts for its operation. This CPU is equipped with three (3) green light emitting diodes (LEDs) to indicate its status. The device configuration is password-protected.
Question: Does Automation Stop offer repairs on the IC697CPU731?
Answer: Yes. We offer repairs for the IC697CPU731 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC697CPU731?
Answer: If you buy the IC697CPU731 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC697CPU731 online?
Answer: Yes. Automation Stop sells the IC697CPU731 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC697CPU731?
Answer: The IC697CPU731 is made by Emerson - GE Fanuc.
For additional information about IC697CPU731 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697CPU731.
Revision Part # | Also Known As | Availability |
---|---|---|
IC697CPU731L | IC697CPU731 Series L, Rev L | Request a Quote |
IC697CPU731M | IC697CPU731 Series M, Rev M | Request a Quote |
IC697CPU731R | IC697CPU731 Series R, Rev R | Request a Quote |
IC697CPU731V | IC697CPU731 Series V, Rev V | Request a Quote |
IC697CPU731W | IC697CPU731 Series W, Rev W | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.