GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC697CHS783 |
Series: | Series 90-70 |
UPC: | 799705795037 |
Description:
Product number IC697CHS783 was designed and manufactured by Emerson - GE Fanuc. This product is a VME integrator rack that belongs to the Series 90-70 product line. This product has a total of 17 slots. This product has a maximum current rating of 3.3 amperes at 5 volts DC and 1.1 amperes at 12 volts DC. This VME integrator rack has physical dimensions that measure 283 mm x 483 mm x 190 mm.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Product number IC697CHS783 is a VME integrator rack. This product was designed and produced by the company known as Emerson - GE Fanuc, and it belongs to the Series 90-70 line of products. This rack easily supports third-party VME modules that require 0.8 inches of mounting space. This rack can handle voltages up to five (5) volts. The maximum current that the user can supply to the rack is 3.3 amperes at five (5) volts direct current (DC) or 1.1 amperes at twelve (12) volts direct current (DC). This GE Fanuc module can be rear mounted to an enclosure with a 10-inch, or 254-millimeter, minimum depth. Additionally, the IC697CHS783 can be front mounted via a standard 19-inch rack, allowing for easier access. The IC697CHS783 includes a 17-slot rear panel for easy integration with other VME modules. This GE Fanuc VME integrator rack has physical dimensions that measure 283 millimeters x 483 millimeters x 190 millimeters, or 11.15 inches x 19.00 inches x 7.5 inches (height x width x depth).
The IC697CHS783 rack can be configured with rear board bridging switches in each slot. The IC697 system allows the user to configure input / output point references for the modules. The racks allow for the connection of modules. The racks have molded latches to fit the top and bottom rails. The IC697CHS783 racks support an optional rack fan kit. All rack configurations support a power supply at the leftmost position. Racks can be mounted horizontally or vertically depending on application requirements.
Question: Does Automation Stop offer repairs on the IC697CHS783?
Answer: Yes. We offer repairs for the IC697CHS783 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC697CHS783?
Answer: If you buy the IC697CHS783 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC697CHS783 online?
Answer: Yes. Automation Stop sells the IC697CHS783 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC697CHS783?
Answer: The IC697CHS783 is made by Emerson - GE Fanuc.
For additional information about IC697CHS783 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697CHS783.
Revision Part # | Also Known As | Availability |
---|---|---|
IC697CHS783D | IC697CHS783 Series D, Rev D | Request a Quote |
IC697CHS783G | IC697CHS783 Series G, Rev G | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.