GE / IP FANUC Series 90/30 In Stock
IC697CHS750
✓ In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC697CHS750 |
| Series: | Series 90-70 |
| UPC: | 799705795051 |
Description:
GE Fanuc manufactures the IC697CHS750, a 5-Slot Rear Mount I/O Rack for the series 90-70 PLCs. It's suitable to link modules from the IC697 PLC series together. It's suggested to connect the power supply to the IC697CHS750's top-left slot. Ground studs are positioned on both the right and left sides of the panel. When mounting the rack, a portion of the area must be left free to allow for access. Additionally, a VME J2 Backplane Module is available as an option to assist with rack installation.
Key Features:
- has a open enclosure enclosure
- has 5 volts dc of voltage
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Adding Items to Cart
Looking for a IC697CHS750? We can help!
Request a QuotePay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc IC697CHS750 rack is a GE Fanuc I/O rack. It joins together several elements and modules from the GE Series 90-70 PLC product range. It features 5 slots and a method for installing it from the back. The rack has an open casing and is only intended for usage inside. It is simple to install on a production floor. Individual power supply for the components connected in the 5 slots may be found on the left-hand side of the device. The rack is small and light, weighing about 2 kilos. Its measurements are 11.15 inches tall, 12.60 inches wide, and 7.5 inches deep. The rack's casing is 254 millimeters deep. Airflow is used to keep the IC697CHS750 rack from overheating. The airflow between the I/O rack and the nearest air exit should not be blocked for convection cooling.
The current rating of the GE Fanuc Series 90-70 IC697CHS750 I/O rack is 20 Amps. A 5-volt Power source is used to drive it. The rack supports additional accessories, such as the backplane J2 jumper kit, which are useful during the setup process. A detachable terminal block is included in the rack, which may be accessible through the open door. The connection to the rack is routed via the hinged door's bottom. On the side of the rack, there is an I/O terminal holding strap that keeps the terminal firmly in place. The spacer and power supply connector are located on the interior of the rack. Grounding techniques can be used to reduce system noise.
FAQ
Question: Does Automation Stop offer repairs on the IC697CHS750?
Answer: Yes. We offer repairs for the IC697CHS750 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC697CHS750?
Answer: If you buy the IC697CHS750 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC697CHS750 online?
Answer: Yes. Automation Stop sells the IC697CHS750 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC697CHS750?
Answer: The IC697CHS750 is made by Emerson - GE Fanuc.
Series information for IC697CHS750
For additional information about IC697CHS750 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697CHS750.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC697CHS750C | IC697CHS750 Series C, Rev C | Request a Quote |
| IC697CHS750D | IC697CHS750 Series D, Rev D | Request a Quote |
| IC697CHS750E | IC697CHS750 Series E, Rev E | Request a Quote |
| IC697CHS750G | IC697CHS750 Series G, Rev G | Request a Quote |
Common Misspellings:
- IC697CHS75O
- IC697CHS7S0
- IC697CHS7SO
- IC697CH5750
- IC697CH575O
- IC697CH57S0
- IC697CH57SO
- ICG97CHS750
- ICG97CHS75O
- ICG97CHS7S0
- ICG97CHS7SO
- ICG97CH5750
- ICG97CH575O
- ICG97CH57S0
- ICG97CH57SO
- 1C697CHS750
- 1C697CHS75O
- 1C697CHS7S0
- 1C697CHS7SO
- 1C697CH5750
- 1C697CH575O
- 1C697CH57S0
- 1C697CH57SO
- 1CG97CHS750
- 1CG97CHS75O
- 1CG97CHS7S0
- 1CG97CHS7SO
- 1CG97CH5750
- 1CG97CH575O
- 1CG97CH57S0
- 1CG97CH57SO
