GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693MDL940 |
| Series: | Series 90-30 |
| UPC: | 555815880663 |
Description:
The GE Fanuc Emerson IC693MDL940 is an output module that includes sixteen relay outputs. These outputs are grouped into four well-isolated groups of four outputs. The IC693MDL940 weighs approximately 430 grams (0.95 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Adding Items to Cart
Looking for a IC693MDL940? We can help!
Request a QuoteKey Features:
- has been discontinued/obsolete
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC693MDL940 is a relay output module that includes sixteen outputs that deliver a voltage of either 5 volts DC to 30 volts DC or 5 volts AC to 250 volts AC at a frequency range from 47 hertz to 63 hertz. These outputs are grouped into four well-isolated groups of four outputs with a separate common power terminal for each group (A1 – A4, A5-A8, B1-B4, and B5 - B8) that are labeled with green LED indicators to show the status of outputs. The IC693MDL940 can be easily mounted in an I/O slot of either 5 or 10-slot baseplate and at any input or output slots of the 90-30 PLC system. The output module provides an on response time of 15 milliseconds and an off response time of 15 milliseconds.
The IC693MDL940 draws a current of 7 milliamperes at a backplane voltage of 5 volts DC and 135 milliamperes at a backplane voltage of 24 volts DC. The module outputs deliver a current of 2 amperes to 4 amperes per point. This module employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 500 volts AC continuously between groups and 1500 volts AC between logic and field side. This device can be employed with Series 90-30 PLCs for incandescent and inductive loads. The module has N.O. contacts. The IC693MDL940 weighs approximately 430 grams (0.95 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | 90-30 |
| Part Number | IC693MDL940 |
| Description | Relay output module |
| Number of I/O points | 16 outputs |
| Output groups | four groups of four outputs each) |
| Rated voltage | 120/240 volts AC (47-63 Hz) or 24 volts DC |
| Contact form | Normally Open (N.O.) |
| Isolation | 1500 volts between field side and logic side / 500 volts between groups |
| Output current | 2 amps pilot duty maximum per output / 4 amps maximum per common |
| Minimum load current | 10 mA |
| Inrush current | 5 Amperes |
| Internal power consumption | 7 mA (all outputs on) from 5 volt bus on backplane / 135 mA (all outputs on) from relay 24V bus on backplane |
| Weight | 430 g (0.95 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC693MDL940?
Answer: Yes. We offer repairs for the IC693MDL940 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL940?
Answer: If you buy the IC693MDL940 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDL940 online?
Answer: Yes. Automation Stop sells the IC693MDL940 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDL940?
Answer: The IC693MDL940 is made by Emerson - GE Fanuc.
Question: What Brand is included with the IC693MDL940?
Answer: The Rockwell-Automation IC693MDL940 has a GE Automation Fanuc / Emerson Automation Brand.
Question: Does the IC693MDL940 have a Contact form?
Answer: Normally Open (N.O.).
Question: What Description is included with the IC693MDL940?
Answer: The Allen Bradley IC693MDL940 has a Relay output module Description.
Question: What is the Inrush current of the IC693MDL940?
Answer: The Allen Bradley IC693MDL940 has a Inrush current of 5 Amperes.
Question: What is the Internal power consumption of the IC693MDL940?
Answer: The IC693MDL940 has a Internal power consumption of 7 mA (all outputs on) from 5 volt bus on backplane / 135 mA (all outputs on) from relay 24 volts bus on backplane.
Question: What is the Isolation of the IC693MDL940?
Answer: The Isolation of the IC693MDL940 is 1500 volts between field side and logic side / 500 volts between groups.
Question: What Minimum load current does the Allen Bradley Automation IC693MDL940 have?
Answer: The Allen Bradley Automation IC693MDL940 has a Minimum load current of 10 mA.
Question: What Number of input/output points does the Allen Bradley/Rockwell Automation IC693MDL940 have?
Answer: The Allen Bradley/Rockwell Automation IC693MDL940 has a Number of input/output points of 16 outputs.
Question: What is the Output current of the IC693MDL940?
Answer: The Output current of the Allen Bradley-Rockwell Automation IC693MDL940 is 2 amperes pilot duty maximum per output / 4 amperes maximum per common.
Question: What Output groups are included with the Allen Bradley-Rockwell Automation IC693MDL940?
Answer: The IC693MDL940 includes four groups of four outputs each) for its Output groups.
Question: What unit Number does the IC693MDL940 have?
Answer: The IC693MDL940 has a part Number of IC693MDL940.
Question: What is the Rated voltage of the IC693MDL940?
Answer: The IC693MDL940 has a Rated voltage of 120/240 volts AC (alternating current) (47-63 Hz) or 24 volts DC (direct current).
Question: What is the Weight of the IC693MDL940?
Answer: The Weight of the Rockwell Automation IC693MDL940 is 430 g (0.95 lb).
Series information for IC693MDL940
For additional information about IC693MDL940 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL940.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693MDL940C | IC693MDL940 Series C, Rev C | Request a Quote |
| IC693MDL940D | IC693MDL940 Series D, Rev D | Request a Quote |
| IC693MDL940E | IC693MDL940 Series E, Rev E | Request a Quote |
| IC693MDL940F | IC693MDL940 Series F, Rev F | Request a Quote |
| IC693MDL940G | IC693MDL940 Series G, Rev G | Request a Quote |
| IC693MDL940H | IC693MDL940 Series H, Rev H | Request a Quote |
| IC693MDL940J | IC693MDL940 Series J, Rev J | Request a Quote |
| IC693MDL940K | IC693MDL940 Series K, Rev K | Request a Quote |
| IC693MDL940M | IC693MDL940 Series M, Rev M | Request a Quote |
| IC693MDL940N | IC693MDL940 Series N, Rev N | Request a Quote |
Common Misspellings:
- IC693MDL94O
- ICG93MDL940
- ICG93MDL94O
- 1C693MDL940
- 1C693MDL94O
- 1CG93MDL940
- 1CG93MDL94O
