GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693MDL741 |
| Series: | Series 90-30 |
| UPC: | 787318123354 |
Description:
The GE Fanuc Emerson IC693MDL741 is a discrete logic output module that includes sixteen discrete output points that are negative logic outputs and support a voltage range from 12 volts DC to 24 volts DC and an output current of 500 milliamperes. These outputs are grouped into two well-isolated groups of eight outputs with a separate common power terminal for each group (A1 ? A8 and B1 - B8) that are labeled with green LED indicators to show the status of outputs. The IC693MDL741 weighs approximately 450 grams (0.99 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Adding Items to Cart
Looking for a IC693MDL741? We can help!
Request a QuoteKey Features:
- has an operating temperature of 0 to 60 degrees celsius
- has been discontinued/obsolete
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC693MDL741 is a discrete logic output module that includes sixteen discrete output points that are negative logic outputs and support a voltage range from 12 volts DC to 24 volts DC and an output current of 500 milliamperes. These outputs are grouped into two well-isolated groups of eight outputs with a separate common power terminal for each group (A1 – A8 and B1 - B8) that are labeled with green LED indicators to show the status of outputs. The module employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 1500 volts between logic and field sides and 500 volts between groups. This output module can be easily mounted in an I/O slot of either 5 or 10-slot baseplate and at any input or output slots of the 90-30 PLC system. The IC693MDL741 offers a high-level of inrush current and is used in many industrial applications such as solenoids and motor starters.
The IC693MDL741 can be electrically supplied either by the operator or from a 12 volts DC/ 24 volts DC power supply. This module draws a current of 110 milliamperes at a voltage of +5 volts DC on the backplane. This module includes two electronic short circuit protection circuits to protect the outputs of two groups. The outputs draw a maximum current of 500 milliamperes per point and a maximum current of 2 amperes per group. The output module includes a hinged door that supports an insert in between the outside and the inside surfaces. The outside left edge of the insert is blue colored to show that this device is a low rating voltage module. The IC693MDL741 hinged door inside area includes the wiring details of the circuit and the outside area contains the identification detail regarding the circuit. The IC693MDL741 weighs approximately 450 grams (0.99 pounds) while shipping.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | 90-30 |
| Part Number | IC693MDL741 |
| Description | Negative logic output module |
| Number of I/O points | 16 |
| Outputs per module | 2 of eight outputs each |
| Rated voltage | 12/24 volts DC |
| Output voltage range | 12 to 24 volts DC (+20%, –15%) |
| Isolation | 1500 volts between field side and logic side / 500 volts between groups |
| Output current | 0.5 amps maximum per point / 2 amps maximum per common |
| On response time | 2 ms maximum |
| Off response time | 2 ms maximum |
| Internal power consumption | 110 mA (all outputs on) from 5 volt bus on backplane |
| Output voltage drop | 0.5 volts maximum |
| Off-state leakage | 1 mA maximum |
| Weight | 450 g (0.99 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC693MDL741?
Answer: Yes. We offer repairs for the IC693MDL741 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL741?
Answer: If you buy the IC693MDL741 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDL741 online?
Answer: Yes. Automation Stop sells the IC693MDL741 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDL741?
Answer: The IC693MDL741 is made by Emerson - GE Fanuc.
Question: What Brand does the IC693MDL741 have?
Answer: The Allen Bradley Automation IC693MDL741 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What Description does the Rockwell-Automation IC693MDL741 have?
Answer: The Rockwell-Automation IC693MDL741 has a Negative logic output module Description.
Question: What Internal power consumption does the Allen Bradley IC693MDL741 have?
Answer: The IC693MDL741 has a Internal power consumption of 110 mA (all outputs on) from 5 volt bus on backplane.
Question: What is the Isolation of the IC693MDL741?
Answer: The Allen-Bradley IC693MDL741 has a Isolation of 1500 volts between field side and logic side / 500 volts between groups.
Question: What is the Number of input/output points of the Allen Bradley/Rockwell Automation IC693MDL741?
Answer: The Number of input/output points of the Allen Bradley/Rockwell Automation IC693MDL741 is 16.
Question: What is the Off response time of the IC693MDL741?
Answer: The Allen Bradley IC693MDL741 has a Off response time of 2 ms maximum.
Question: What is the Off-state leakage of the IC693MDL741?
Answer: The Off-state leakage of the IC693MDL741 is 1 mA maximum.
Question: What is the On response time of the IC693MDL741?
Answer: The Allen Bradley/Rockwell Automation IC693MDL741 has a On response time of 2 ms maximum.
Question: What is the Output current of the Allen Bradley Automation IC693MDL741?
Answer: The Allen Bradley Automation IC693MDL741 has a Output current of 0.5 amperes maximum per point / 2 amperes maximum per common.
Question: What Output voltage drop does the IC693MDL741 have?
Answer: The Allen Bradley-Rockwell Automation IC693MDL741 has a Output voltage drop of 0.5 volts maximum.
Question: What is the Output voltage range of the Rockwell Automation IC693MDL741?
Answer: The Output voltage range of the Rockwell Automation IC693MDL741 is 12 to 24 volts direct current (DC) (+20%, –15%).
Question: What is the Outputs per module of the IC693MDL741?
Answer: The Outputs per module of the Allen Bradley-Rockwell Automation IC693MDL741 is 2 of eight outputs each.
Question: What is the unit Number of the IC693MDL741?
Answer: The IC693MDL741 has a part Number of IC693MDL741.
Question: What is the Rated voltage of the IC693MDL741?
Answer: The Rockwell Automation IC693MDL741 has a Rated voltage of 12/24 volts DC.
Question: What Weight does the IC693MDL741 have?
Answer: The Allen-Bradley IC693MDL741 has a Weight of 450 g (0.99 lb).
Series information for IC693MDL741
For additional information about IC693MDL741 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL741.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693MDL741C | IC693MDL741 Series C, Rev C | Request a Quote |
| IC693MDL741D | IC693MDL741 Series D, Rev D | Request a Quote |
| IC693MDL741E | IC693MDL741 Series E, Rev E | Request a Quote |
| IC693MDL741F | IC693MDL741 Series F, Rev F | Request a Quote |
| IC693MDL741G | IC693MDL741 Series G, Rev G | Request a Quote |
Common Misspellings:
- IC693MDL74I
- ICG93MDL741
- ICG93MDL74I
- 1C693MDL741
- 1C693MDL74I
- 1CG93MDL741
- 1CG93MDL74I
