GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693MDL340 |
| Series: | Series 90-30 |
| UPC: | 135686018275 |
Description:
The IC693MDL340 is a Series 90-30 Programmable Logic Controller that is branded and manufactured by GE Fanuc Emerson. It is a 120 Volt, 0.5 Ampere AC Output module that provides sixteen (16) output points in two (2) isolated groups with eight (8) points in each group.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC693MDL340 is a 120 Volt, 0.5 Ampere AC Output module that is part of GE's Series 90-30 of Programmable Logic Controllers. It provides sixteen (16) output points in two (2) isolated groups with eight (8) points in each group. Each of these groups has a separate common associated with it; this allows each group to be used on different phases of the AC supply or powered from the same supply. Each of these groups is protected with a 3 Ampere fuse and an RC snubber is provided for each output to protect against transient electrical noise on the power line. The IC693MDL340 uses LED indicators that provide the user with the ON/OFF status of each point; they are located at the top of the module. The LEDs consist of eight (8) green LEDs in two horizontal rows, for a total of 16 green LEDs; there is one red LED centered between and to the right of the two rows of red LEDs.
Specifications for the IC693MDL340 include a rated voltage of 120 Volts AC, an output voltage range of 85 to 132 Volts AC, 50/60 Hertz, and sixteen (16) outputs per module (two groups of eight outputs each). Isolation voltage is 1500 Volts between the field side and logic side, as well as 500 Volts between each group. Output current is 0.5 Amperes maximum per point and 3 Amperes maximum per group. Output characteristics include an inrush current of 20 Amperes maximum for one (1) cycle and a minimum load current of 50 milliamperes. The output voltage drop for the IC693MDL340 is 1.5 Volts maximum, while the output leakage current is 2 milliamperes maximum at 120 Volts AC. On response time is 1 millisecond maximum and off response time is 1/2 cycle maximum. The IC693MDL340 has a power consumption of 315 milliamperes (all outputs on) from the 5 Volt bus on the backplane.
Technical Specifications
| Brand | GE Fanuc Emerson |
| Series | 90-30 |
| Module Type | Programmable Logic Controller (PLC) |
| Rated Voltage | 120 Volts AC |
| Output Voltage Range | 85 to 132 Volts AC, 50/60 Hertz |
| Outputs per Module | 16 (two groups of eight outputs each) |
| Isolation | 1500 Volts between Field Side and Logic Side, 500 Volts between Groups |
| Output Current | 0.5 Amperes maximum per Point, 3 Amperes maximum per Group |
| Inrush Current | 20 Amperes maximum for One Cycle |
| Minimum Load Current | 50 milliamperes |
| Output Voltage Drop | 1.5 Volts maximum |
| Output Leakage Current | 2 milliamperes maximum at 120 Volts AC |
| On Response Time | 1 millisecond maximum |
| Off Response Time | 1/2 Cycle maximum |
| Power Consumption | 315 milliamperes (all outputs on) from 5 Volt Bus on Backplane |
FAQ
Question: Does Automation Stop offer repairs on the IC693MDL340?
Answer: Yes. We offer repairs for the IC693MDL340 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL340?
Answer: If you buy the IC693MDL340 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDL340 online?
Answer: Yes. Automation Stop sells the IC693MDL340 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDL340?
Answer: The IC693MDL340 is made by Emerson - GE Fanuc.
Question: What Brand does the Allen Bradley-Rockwell Automation IC693MDL340 have?
Answer: The Allen Bradley-Rockwell Automation IC693MDL340 has a GE Fanuc Emerson Brand.
Question: What is the Inrush Current of the IC693MDL340?
Answer: The Inrush Current of the IC693MDL340 is 20 Amperes maximum for One Cycle.
Question: What is the Isolation of the Allen Bradley-Rockwell Automation IC693MDL340?
Answer: The IC693MDL340 has a Isolation of 1500 Volts between Field Side and Logic Side, 500 Volts between Groups.
Question: What Minimum Load Current does the Allen Bradley IC693MDL340 have?
Answer: The Minimum Load Current of the IC693MDL340 is 50 milliamperes.
Question: What Module Type does the Allen Bradley IC693MDL340 have?
Answer: The Allen Bradley IC693MDL340 has a Programmable Logic Controller (PLC) Module Type.
Question: What is the Off Response Time of the IC693MDL340?
Answer: The Off Response Time of the Rockwell-Automation IC693MDL340 is 1/2 Cycle maximum.
Question: What On Response Time does the IC693MDL340 have?
Answer: The On Response Time of the Allen Bradley Automation IC693MDL340 is 1 millisecond maximum.
Question: What is the Output Current of the IC693MDL340?
Answer: The Allen Bradley Automation IC693MDL340 has a Output Current of 0.5 Amperes maximum per Point, 3 Amperes maximum per Group.
Question: What is the Output Leakage Current of the Allen-Bradley IC693MDL340?
Answer: The Allen-Bradley IC693MDL340 has a Output Leakage Current of 2 milliamperes maximum at 120 Volts alternating current (AC).
Question: What Output Voltage Drop does the IC693MDL340 have?
Answer: The Output Voltage Drop of the IC693MDL340 is 1.5 Volts maximum.
Question: What is the Output Voltage Range of the IC693MDL340?
Answer: The Output Voltage Range of the IC693MDL340 is 85 to 132 Volts AC (alternating current), 50/60 Hertz.
Question: What is the Outputs per Module of the IC693MDL340?
Answer: The Outputs per Module of the Allen Bradley-Rockwell Automation IC693MDL340 is 16 (two groups of eight outputs each).
Question: What is the Power Consumption of the Rockwell-Automation IC693MDL340?
Answer: The Power Consumption of the IC693MDL340 is 315 milliamperes (all outputs on) from 5 Volt Bus on Backplane.
Question: What Rated Voltage does the Rockwell Automation IC693MDL340 have?
Answer: The Rockwell Automation IC693MDL340 has a Rated Voltage of 120 Volts alternating current (AC).
Series information for IC693MDL340
For additional information about IC693MDL340 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL340.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693MDL340B | IC693MDL340 Series B, Rev B | Request a Quote |
| IC693MDL340D | IC693MDL340 Series D, Rev D | Request a Quote |
| IC693MDL340E | IC693MDL340 Series E, Rev E | Request a Quote |
| IC693MDL340F | IC693MDL340 Series F, Rev F | Request a Quote |
Common Misspellings:
- IC693MDL34O
- ICG93MDL340
- ICG93MDL34O
- 1C693MDL340
- 1C693MDL34O
- 1CG93MDL340
- 1CG93MDL34O
