GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693MDL241 |
| Series: | Series 90-30 |
| UPC: | 265794526727 |
Description:
The GE Fanuc Emerson IC693MDL241 is a discrete logic input module that includes 16 discrete input points which can be positive or negative logic inputs and supports a voltage rating range from either zero (0) Volts DC to 30 Volts DC or from zero (0) Volts AC to 30 Volts AC at a frequency of 50/60 Hertz. The IC693MDL241 inputs are grouped into a single well-isolated group (A1 - B8) which are labeled with green LED indicators to show the status of inputs with a common power input terminal. The IC693MDL241 weighs approximately 310 grams (0.68 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Adding Items to Cart
Looking for a IC693MDL241? We can help!
Request a QuoteKey Features:
- has 24 v ac of voltage
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC693MDL241 is a discrete logic input module that includes sixteen (16) discrete input points which can be positive or negative logic inputs and supports a voltage rating range from either zero (0) Volts DC to 30 Volts DC or from zerp (0) Volts AC to 30 Volts AC at a frequency of 50/60 Hertz. The IC693MDL241 inputs are grouped into a single well-isolated group (A1 - B8) which are labeled with green LED indicators to show the status of inputs with a common power input terminal. The IC693MDL241 employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 1500 Volts between logic and field sides. The IC693MDL241 can be easily mounted in an I/O slot of either 5 or 10-slot baseplate. The IC693MDL241 can be employed with many AC or DC input devices such as limit and electronic proximity switches and pushbuttons.
The IC693MDL241 can be electrically supplied either by the operator or from an isolated +24 Volts DC supply which can be found with I/O connectors of the module. This module draws a current rating of 80 milliamperes at a voltage of +5 Volts DC and a current rating of 125 milliamperes at a voltage of 24 Volts DC. The IC693MDL241 inputs draw a current rating of 7 milliamperes. It includes a hinged door that supports an insert in between the outside and the inside surfaces. The IC693MDL241 outside left edge of the insert is blue to show that this device is a low rating voltage module. The IC693MDL241 hinged door inside area includes the wiring details of the circuit and the outside area contains the identification detail regarding the circuit. The IC693MDL241 weighs approximately 310 grams (0.68 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | 16 discrete points, 24 volts VAC/VDC positive/negative logic input module for Series 90-30 PLCs |
| Part Number | IC693MDL241 |
| Number of I/O Points | 16 |
| Input Groups | One group with a single common |
| Rated Voltage | 24 Volts AC or 24 Volts DC |
| Input Voltage Range | 0 to +30 Volts DC or 0 to +30 Volts AC, 50/60 Hertz |
| Isolation | 1500 Volts between field side and logic side |
| Input Current | 7.0 mA |
| On-State Voltage | 11.5 to 30 Volts AC or DC |
| Off-State Voltage | 0 to +4 Volts AC or DC |
| On-State Current | 3.2 mA, minimum |
| Off-state Current | 1 mA (maximum) |
| On Response Time | 12 milliseconds, maximum |
| Off Response Time | 28 milliseconds, maximum |
| Internal Power Consumption | 80 mA (all inputs on) from 5 Volt bus on backplane / 125 mA from the Isolated 24 Volt backplane bus or from user supplied power |
| Weight | 310 g (0.68 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC693MDL241?
Answer: Yes. We offer repairs for the IC693MDL241 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL241?
Answer: If you buy the IC693MDL241 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDL241 online?
Answer: Yes. Automation Stop sells the IC693MDL241 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDL241?
Answer: The IC693MDL241 is made by Emerson - GE Fanuc.
Question: What Brand is included with the IC693MDL241?
Answer: The IC693MDL241 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the Input Current of the Rockwell Automation IC693MDL241?
Answer: The Input Current of the Rockwell Automation IC693MDL241 is 7.0 mA.
Question: What kind of Input Groups does the IC693MDL241 have?
Answer: The Rockwell Automation IC693MDL241 includes One group with a single common for its Input Groups.
Question: What is the Input Voltage Range of the IC693MDL241?
Answer: The Input Voltage Range of the Allen-Bradley IC693MDL241 is 0 to +30 Volts DC (direct current) or 0 to +30 Volts AC (alternating current), 50/60 Hertz.
Question: What is the Internal Power Consumption of the IC693MDL241?
Answer: The Allen Bradley/Rockwell Automation IC693MDL241 has a Internal Power Consumption of 80 mA (all inputs on) from 5 Volt bus on backplane / 125 mA from the Isolated 24 Volt backplane bus or from user supplied power.
Question: What is the Isolation of the Allen Bradley IC693MDL241?
Answer: The Allen Bradley IC693MDL241 has a Isolation of 1500 Volts between field side and logic side.
Question: What Number of input/output Points does the Allen Bradley-Rockwell Automation IC693MDL241 have?
Answer: The Number of input/output Points of the Allen Bradley-Rockwell Automation IC693MDL241 is 16.
Question: What Off Response Time does the Rockwell-Automation IC693MDL241 have?
Answer: The Rockwell-Automation IC693MDL241 has a Off Response Time of 28 milliseconds, maximum.
Question: What is the Off-state Current of the IC693MDL241?
Answer: The Off-state Current of the IC693MDL241 is 1 mA (maximum).
Question: What Off-State Voltage does the Allen-Bradley IC693MDL241 have?
Answer: The IC693MDL241 has a Off-State Voltage of 0 to +4 Volts AC (alternating current) or DC.
Question: What is the On Response Time of the IC693MDL241?
Answer: The On Response Time of the IC693MDL241 is 12 milliseconds, maximum.
Question: What is the On-State Current of the Rockwell Automation IC693MDL241?
Answer: The Rockwell Automation IC693MDL241 has a On-State Current of 3.2 mA, minimum.
Question: What On-State Voltage does the Allen Bradley-Rockwell Automation IC693MDL241 have?
Answer: The On-State Voltage of the Allen Bradley-Rockwell Automation IC693MDL241 is 11.5 to 30 Volts AC (alternating current) or DC (direct current).
Question: What part Number does the Allen Bradley/Rockwell Automation IC693MDL241 have?
Answer: The Allen Bradley/Rockwell Automation IC693MDL241 has a unit Number of IC693MDL241.
Question: What Rated Voltage does the Allen-Bradley IC693MDL241 have?
Answer: The IC693MDL241 has a Rated Voltage of 24 Volts AC (alternating current) or 24 Volts DC (direct current).
Question: What is the Weight of the Rockwell-Automation IC693MDL241?
Answer: The Weight of the Rockwell-Automation IC693MDL241 is 310 g (0.68 lb).
Series information for IC693MDL241
For additional information about IC693MDL241 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL241.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693MDL241C | IC693MDL241 Series C, Rev C | Request a Quote |
| IC693MDL241D | IC693MDL241 Series D, Rev D | Request a Quote |
| IC693MDL241F | IC693MDL241 Series F, Rev F | Request a Quote |
| IC693MDL241L | IC693MDL241 Series L, Rev L | Request a Quote |
Common Misspellings:
- IC693MDL24I
- ICG93MDL241
- ICG93MDL24I
- 1C693MDL241
- 1C693MDL24I
- 1CG93MDL241
- 1CG93MDL24I
