GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC693MDL231 |
Series: | Series 90-30 |
UPC: | 558724961126 |
Description:
The GE Fanuc designed IC693MDL231 isolated input module is part of the Series 90-30 from GE Intelligent Platforms (GE Fanuc). The voltage rating for this module is 240 Volts AC. The Series 90-30 are compatible with Programmable Logic Controllers (PLCs). This input module contains eight independent input points, these are equipped with a single power supply input terminal. Due to the module's input properties, users may command a wide variety of input devices.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
GE Intelligent Platforms (GE Fanuc) manufactures the IC693MDL231 isolated input module. It is part of the Series 90-30 range of products and runs at a 240 Volts AC voltage. At rated voltage, the typical input current is 15 milliamperes. This module is an excellent fit for GE Series 90-30 PLCs. This input module consists of eight separated input points, each with its own power input terminal. It offers input characteristics that make it ideal for usage with a variety of input gadgets that can be handled via the IC693MDL231 unit. Such devices are electronic proximity switch, limit switching device, and push-button that may be activated through an exterior power source supplied by the user. Because this is an AC modular unit, it does not require DC power. The isolation between the field and logic sides of the IC693MDL231 isolated input module is 1500 volts RMS, while the isolation between the inputs is 500 volts RMS.
Like other Series 90-30 modules, the GE Fanuc's IC693MDL231 input module has an LED block on the front. This module includes eight LEDs in a single row which indicate the state of input points 1 to 8. Additionally, it features a front door panel that accommodates an insert between both the inside and outside surfaces. When the door shuts, the outside surface of the insert stores the information on the circuit identification. Additionally, the inside surface of the insert will have circuit wiring details. The insert features a red border to show that the IC693MDL231 module operates at a high voltage. By utilizing the input and output slots, operators of this module can install an input module in either of the Series 90-30 PLC's 5- or 10-slot base plates.
Question: Does Automation Stop offer repairs on the IC693MDL231?
Answer: Yes. We offer repairs for the IC693MDL231 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL231?
Answer: If you buy the IC693MDL231 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDL231 online?
Answer: Yes. Automation Stop sells the IC693MDL231 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDL231?
Answer: The IC693MDL231 is made by Emerson - GE Fanuc.
For additional information about IC693MDL231 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL231.
Revision Part # | Also Known As | Availability |
---|---|---|
IC693MDL231E | IC693MDL231 Series E, Rev E | Request a Quote |
IC693MDL231F | IC693MDL231 Series F, Rev F | Request a Quote |
IC693MDL231H | IC693MDL231 Series H, Rev H | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.