GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC693CPU331 |
Series: | Series 90-30 |
UPC: | 129160206838 |
Description:
The IC693CPU331 is a CPU module that consists of the CPU, memory chip, integrated circuit chip connected to a circuit board, and backplane board. The scan rate per 1 K of logic, or the Boolean contacts, is typically 0.4 milliseconds in this CPU type. The user has access to a maximum of 16K bytes of program memory. There are also 128 bits set out for System Status references.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Looking for a IC693CPU331? We can help!
Request a QuoteKey Features:
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC693CPU331 is a CPU module with a single slot. The module is designed to work with the PLC 90-30 GE Fanuc. The module comes with a clock speed of 10 megahertz and has a microprocessor type of 80188. Additionally, it features a single port for communication and has 512 I/O discrete points: (Input + Output). In addition to discrete points, the module can operate at a temperature of 32 to 140 degrees Celsius. Apart from that, the CPU module contains a single slot per system for a five slot baseplate. It carries 350mA of current from the backplane at 5V DC input voltage. The maximum user program memory allocated to this CPU module is 16K Bytes. It takes 0.4 milliseconds for one thousand Boolean Contacts to scan with its scan rating feature. In addition, this baseplate single slot CPU module by GE Fanuc accepts shift registers, and it also includes a clock for a backed battery. The type of memory storage supported by this module is RAM, and it has 680 timers. Moreover, the module features inbuilt ports such as SNP/SNP-X slave protocols. However, it will need a CMM module for SNP/SNP-X master and CCM, or RTU slave support for a PCM module for RTU master support. Besides that, the communication types compatible with this module include LAN, Ethernet, FIP, Profibus, GBC, GCM, GCM+, and others. Overall, the module features most of the useful components and functions in this product line compared to some of the earlier versions of the CPU baseplates.
Brand | GE Fanuc Emerson |
CPU Type | Single Slot CPU Module |
Total Baseplates per System | 5 (1 CPU baseplate + 4 expansion and/or remote) |
Load Required from Power Supply | 350 milliamperes from +5 Volt DC Supply |
Processor Speed | 10 Megahertz |
Processor Type | 80188 |
Operating Temperature | 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) ambient |
Typical Scan Rate | 0.4 milliseconds per 1K of Logic (Boolean Contacts) |
User Program Memory (max.) | 16K bytes |
Timers/Counters | 680 |
Shift Registers | Yes |
Override | Yes |
Battery Backed Clock | Yes |
PCM/CCM Compatibility | Yes |
Question: Does Automation Stop offer repairs on the IC693CPU331?
Answer: Yes. We offer repairs for the IC693CPU331 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693CPU331?
Answer: If you buy the IC693CPU331 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693CPU331 online?
Answer: Yes. Automation Stop sells the IC693CPU331 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693CPU331?
Answer: The IC693CPU331 is made by Emerson - GE Fanuc.
Question: Does the Allen Bradley IC693CPU331 have a Battery Backed Clock?
Answer: Yes.
Question: What Brand does the IC693CPU331 have?
Answer: The Allen Bradley IC693CPU331 has a GE Fanuc Emerson Brand.
Question: What central processing unit (CPU) Type is included with the Allen Bradley/Rockwell Automation IC693CPU331?
Answer: The IC693CPU331 has a Single Slot central processing unit (CPU) Module central processing unit (CPU) Type.
Question: What Load Required from power supply does the Rockwell Automation IC693CPU331 have?
Answer: The Load Required from power supply component of the IC693CPU331 is 350 milliamperes from +5 Volt DC (direct current) Supply.
Question: What is the Operating Temperature of the IC693CPU331?
Answer: The Rockwell-Automation IC693CPU331 has a Operating Temperature of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) ambient .
Question: Does the IC693CPU331 have a Override?
Answer: Yes.
Question: Does the Allen-Bradley IC693CPU331 have a PCM/CCM Compatibility?
Answer: Yes.
Question: What Processor Speed does the Rockwell Automation IC693CPU331 have?
Answer: The IC693CPU331 has a Processor Speed of 10 Megahertz.
Question: What Processor Type does the Rockwell-Automation IC693CPU331 have?
Answer: The Processor Type of the IC693CPU331 is 80188.
Question: Does the IC693CPU331 have a Shift Registers?
Answer: Yes .
Question: What is the Timers/Counters of the IC693CPU331?
Answer: The IC693CPU331 has a Timers/Counters of 680.
Question: What is the Total Baseplates per System of the IC693CPU331?
Answer: The Total Baseplates per System of the IC693CPU331 is 5 (1 central processing unit (CPU) baseplate + 4 expansion and/or remote).
Question: What is the Typical Scan Rate of the Allen Bradley IC693CPU331?
Answer: The Allen Bradley IC693CPU331 has a Typical Scan Rate of 0.4 milliseconds per 1K of Logic (Boolean Contacts).
Question: What User Program random-access memory (RAM) (max.) does the Allen Bradley IC693CPU331 have?
Answer: The IC693CPU331 has a User Program random-access memory (RAM) (max.) of 16K bytes.
For additional information about IC693CPU331 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693CPU331.
Revision Part # | Also Known As | Availability |
---|---|---|
IC693CPU331-BB | IC693CPU331 Series BB, Rev BB | Request a Quote |
IC693CPU331-CC | IC693CPU331 Series CC, Rev CC | Request a Quote |
IC693CPU331-CD | IC693CPU331 Series CD, Rev CD | Request a Quote |
IC693CPU331K | IC693CPU331 Series K, Rev K | Request a Quote |
IC693CPU331L | IC693CPU331 Series L, Rev L | Request a Quote |
IC693CPU331N | IC693CPU331 Series N, Rev N | Request a Quote |
IC693CPU331S | IC693CPU331 Series S, Rev S | Request a Quote |
IC693CPU331-SRA | IC693CPU331 Series SRA, Rev SRA | Request a Quote |
IC693CPU331W | IC693CPU331 Series W, Rev W | Request a Quote |
IC693CPU331X | IC693CPU331 Series X, Rev X | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.