GE / IP FANUC Series 90/30 In Stock
IC693CBL311
✓ In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693CBL311 |
| Series: | Series 90-30 |
Description:
Product number IC693CBL311 is an input/output cable. It belongs to the Series 90-30 product line. This cable was designed and produced by Emerson - GE Fanuc. This cable aids in the connection of a PowerMate APM module to machines and drives. The IC693CBL311 consists of a 24-pin input/output connector, a cable, and a 25-pin D-type terminal block connector. This cable measures approximately 10 feet, or 3 meters, in length. It also weighs approximately 2.0 pounds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC693CBL311 is an input/output interface cable. This cable belongs to the Series 90-30 product line. It was designed and manufactured by Emerson - GE Fanuc. The primary use of this cable is for connection between machines and drives with PowerMate APM modules. The interface cable assembly consists of a cable, an input/output connector with 24 pins, and a D-type terminal block connector that has 24 pins. The PowerMate APM modules have two male connectors each with 24 pins that are found in the front section. During installation and assembly, two (2) input/output interface cables are normally required to be able to effectively connect the machines and drives to the PowerMate APM module. The first cable, with the part number IC693CBL319, normally has a length of 3 feet (1 meter), and the second cable, with the part number IC693CBL311, is 10 feet (3 meters) long. For easy connection to the drive and machine, short input/output interface cables are normally used for connection between the modules and the terminal block. It is possible to shorten the cables to the required length.
Reaction to or the triggering of unwanted electrical signals or noises by the logic circuit of the PowerMate APM module is greatly reduced by the IC693CBL311 input/output interface cable. The wiring used for conducting current is a 28 American Wire Gauge (AWG) size wire that is shielded by a normal insulating material and then enclosed in a cable housing. This also protects the handler against electric shock when in use. The approximate weight of this input/output interface cable is 2.0 pounds.
FAQ
Question: Does Automation Stop offer repairs on the IC693CBL311?
Answer: Yes. We offer repairs for the IC693CBL311 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693CBL311?
Answer: If you buy the IC693CBL311 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693CBL311 online?
Answer: Yes. Automation Stop sells the IC693CBL311 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693CBL311?
Answer: The IC693CBL311 is made by Emerson - GE Fanuc.
Question: What voltage does the Emerson - GE Fanuc IC693CBL311 have?
Answer: The IC693CBL311 has a voltage of 24.
Series information for IC693CBL311
For additional information about IC693CBL311 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693CBL311.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693CBL311B | IC693CBL311 Series B, Rev B | Request a Quote |
Common Misspellings:
- IC693CBL31I
- IC693CBL3I1
- IC693CBL3II
- IC693C8L311
- IC693C8L31I
- IC693C8L3I1
- IC693C8L3II
- ICG93CBL311
- ICG93CBL31I
- ICG93CBL3I1
- ICG93CBL3II
- ICG93C8L311
- ICG93C8L31I
- ICG93C8L3I1
- ICG93C8L3II
- 1C693CBL311
- 1C693CBL31I
- 1C693CBL3I1
- 1C693CBL3II
- 1C693C8L311
- 1C693C8L31I
- 1C693C8L3I1
- 1C693C8L3II
- 1CG93CBL311
- 1CG93CBL31I
- 1CG93CBL3I1
- 1CG93CBL3II
- 1CG93C8L311
- 1CG93C8L31I
- 1CG93C8L3I1
- 1CG93C8L3II
