GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC693BEM330

✓ In Stock

IC693BEM330 Image 1 thumbnail
IC693BEM330 Image 2 thumbnail
IC693BEM330 Image 3 thumbnail
IC693BEM330 Image 4 thumbnail
IC693BEM330 Image 5 thumbnail
IC693BEM330 Image 6 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC693BEM330
Series: Series 90-30
UPC: 559841164278

Description:

The GE Fanuc Emerson IC693BEM330 is an intelligent FIP remote I/O scanner that offers the possibility to interface Series 90-30 I/O modules to an FIP bus and to connect nineteen (19) I/O modules through two 10-slot baseplates and an expansion cable with a length of 1.5 meters (50 feet) with 128 devices. This remote scanner can be connected with I/O modules to build an I/O nest. The IC693BEM330 is compatible with most Series 90-30 I/O devices. The IC693BEM330 contains two 9-pin male D connectors for two FIP bus wires and a single FIP synchronization wire connector with a lug for grounding cable. This module draws a current rating of 609 milliamperes at a voltage of +5 Volts DC.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$988.00

Available: 1

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$791.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a IC693BEM330? We can help!

Request a Quote

Key Features:

  • is a fip i/o scanner

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC693BEM330 is an intelligent FIP remote I/O scanner that offers the possibility to interface Series 90-30 I/O modules to an FIP bus and to connect nineteen (19) I/O modules through two 10-slot baseplates and an expansion cable with a length of 1.5 meters (50 feet) with 128 devices. This remote scanner can be connected with I/O modules to build an I/O nest. The IC693BEM330 is compatible with most Series 90-30 I/O devices. The IC693BEM330 provides full control of the I/O nest operations in the appropriate mode and scans and checks both analog and discrete I/O modules, maintains I/O scan timing, and maps I/O data information to application variables of the FIP. The IC693BEM330 can sense both module and system errors and reports these failures and input transitions to the FIP network.

The IC693BEM330 can communicate with a data rate of 1 Megahertz and store the network configuration in the case of a loss of power. This remote scanner can be programmed using the hand-held programmer and can support FIP messaging services and interact with external synchronization signals. The IC693BEM330 offers either pulsed or blinking outputs and provides chatter detection and the input filtering feature. It includes four (4) LED indicators on the faceplate to show the current status of channels. The IC693BEM330 contains two 9-pin male D connectors for two FIP bus wires and a single FIP synchronization wire connector with a lug for grounding cable. This module draws a current rating of 609 milliamperes at a voltage of +5 Volts DC. The IC693MDL241 weighs approximately 290 grams (0.65 pounds) while shipping.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series Factory instrumentation protocol (FIP) remote I/O scanner for Series 90-30 PLCs
Part Number IC693BEM330
Module Type FIP I/O Scanner
Load Requirement 609 mA at +5 VDC
Number of Slots 1 (single slot)
Backplane Support Universal Backplane
I/O Points Up to 19 I/O modules
Communication Ports (2) 9-pin male D connectors
Number of LEDs 4
LED Indicators CD1, TEN1, CD2, TEN2
Weight 290 g (0.65 lb)
Data rate of FIP communication 1 MHz
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC693BEM330?

Answer: Yes. We offer repairs for the IC693BEM330 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC693BEM330?

Answer: If you buy the IC693BEM330 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC693BEM330 online?

Answer: Yes. Automation Stop sells the IC693BEM330 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC693BEM330?

Answer: The IC693BEM330 is made by Emerson - GE Fanuc.


Question: What Backplane Support is included with the Allen Bradley Automation IC693BEM330?

Answer: The Allen Bradley Automation IC693BEM330 has a Universal Backplane Backplane Support.


Question: What Brand does the Allen Bradley/Rockwell Automation IC693BEM330 have?

Answer: The IC693BEM330 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What Communication Ports does the Rockwell-Automation IC693BEM330 have?

Answer: The Rockwell-Automation IC693BEM330 has a Communication Ports of (2) 9-pin male D connectors.


Question: What is the Data rate of FIP communication of the IC693BEM330?

Answer: The Data rate of FIP communication of the IC693BEM330 is 1 gigahertz.


Question: What input/output Points does the Allen Bradley/Rockwell Automation IC693BEM330 have?

Answer: The IC693BEM330 has a input/output Points of Up to 19 input/output modules.


Question: What is the LED Indicators of the IC693BEM330?

Answer: The Allen Bradley Automation IC693BEM330 has a LED Indicators of CD1, TEN1, CD2, TEN2.


Question: What Load Requirement does the IC693BEM330 have?

Answer: The Rockwell Automation IC693BEM330 has a Load Requirement of 609 mA at +5 VDC.


Question: What Module Type is included with the Allen Bradley IC693BEM330?

Answer: The Allen Bradley IC693BEM330 has a FIP input/output Scanner Module Type.


Question: What is the Number of LEDs of the IC693BEM330?

Answer: The Number of LEDs of the Rockwell-Automation IC693BEM330 is 4.


Question: What is the Number of Slots of the Allen Bradley-Rockwell Automation IC693BEM330?

Answer: The Allen Bradley-Rockwell Automation IC693BEM330 has a Number of Slots of 1 (single slot).


Question: What component Number does the Allen Bradley/Rockwell Automation IC693BEM330 have?

Answer: The Allen Bradley/Rockwell Automation IC693BEM330 has a part Number of IC693BEM330.


Question: What is the Weight of the IC693BEM330?

Answer: The Weight of the IC693BEM330 is 290 g (0.65 lb).


Series information for IC693BEM330

For additional information about IC693BEM330 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693BEM330.

Revision Part # Also Known As Availability
IC693BEM330-BC IC693BEM330 Series BC, Rev BC Request a Quote
IC693BEM330-CF IC693BEM330 Series CF, Rev CF Request a Quote
IC693BEM330-DH IC693BEM330 Series DH, Rev DH Request a Quote

Common Misspellings:

  • IC693BEM33O
  • IC6938EM330
  • IC6938EM33O
  • ICG93BEM330
  • ICG93BEM33O
  • ICG938EM330
  • ICG938EM33O
  • 1C693BEM330
  • 1C693BEM33O
  • 1C6938EM330
  • 1C6938EM33O
  • 1CG93BEM330
  • 1CG93BEM33O
  • 1CG938EM330
  • 1CG938EM33O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP