GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC698PSA350

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC698PSA350
Series: RX7i
UPC: 411509094481

Description:

The IC698PSA350 is a PACSystems RX7i Power Supply by GE Fanuc Emerson. It provides +5 Volt DC, +12 Volt DC, and -12 Volt DC power, logic level sequencing signals to modules on the RX7i backplane. This module plugs directly into slot 0 of the RX7i main rack.


Key Features:

  • includes 100 watts of power

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$2,708.00

Available: 8

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$1,588.00

Available: 1

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$1,271.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a IC698PSA350? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC698PSA350 is a PACSystems RX7i Power Supply by GE Fanuc Emerson. This power supply comes with standard features such as operation from 85 to 264 Volts AC and 100 to 150 Volts DC, slide-in rack mount construction, electronic short circuit overcurrent protection, overcurrent and overvoltage fault protection, and power factor correction for AC operation. The IC698PSA350 has LED indicators for FIELD OK, OUTPUT OK, and OVER TEMP. Field OK turns on when AC power is applied within its specification range, Output OK turns on when all three DC output channels are operating within their specifications, and Over Temp turns on when the critical supply temperature is exceeded or if the airflow sensor detects cessation of air flow.

Specifications for the IC698PSA350 include a nominal rated voltage of 120/240 Volts AC, 125 Volts DC and an input voltage range between 85 and 264 Volts AC (47-63 Hertz), 100-150 Volts DC. Input power 100 Watt supply is 125 Watts (typical) and 150 Watts (maximum) while input power 350 Watt supply is 437 Watts (typical) and 500 Watts (maximum). Input requirements for the 100 Watt supply is 15 Amperes maximum for inrush current from cold start of 115 Volts AC and 30 Amperes maximum for inrush current from cold start of 230 Volts AC; inrush current duration is 100 milliseconds. Input requirements for 350 Watt supply are 30 Amperes maximum for inrush current from cold start at 115 Volts AC and 60 Amperes maximum for inrush current from cold start at 230 Volts AC; inrush current duration for 350 Watt supply is also 100 milliseconds.

Technical Specifications

Brand GE Fanuc Emerson
Nominal Rated Voltage 120/240 Volts AC, 125 Volts DC
Input Voltage Range 85 to 264 Volts AC 47-63 Hertz, 100-150 Volts DC
Input Power, 100 Watt Supply 125 Watts (typical), 150 Watts (maximum)
Input Power, 350 Watt Supply 437 Watts (typical), 500 Watts (maximum)
100 Watt Supply Inrush Current (Cold Start - 115 Volts AC) 15 Amperes, maximum
100 Watt Supply Inrush Current (Cold Start - 230 Volts AC) 30 Amperes, maximum
Inrush Current Duration (100 W) 100 milliseconds
350 Watt Supply Inrush Current (Cold Start - 115 Volts AC) 30 Amperes, maximum
350 Watt Supply Inrush Current (Cold Start - 230 Volts AC) 60 Amperes, maximum
Inrush Current Duration (350 W) 100 milliseconds
Power Factor 0.99 min (only valid between 90 Volts AC and 260 Volts AC)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC698PSA350?

Answer: Yes. We offer repairs for the IC698PSA350 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC698PSA350?

Answer: If you buy the IC698PSA350 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC698PSA350 online?

Answer: Yes. Automation Stop sells the IC698PSA350 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC698PSA350?

Answer: The IC698PSA350 is made by Emerson - GE Fanuc.


Question: What is the 100 Watt Supply Inrush Current (Cold Start - 115 Volts AC (alternating current)) of the IC698PSA350?

Answer: The 100 Watt Supply Inrush Current (Cold Start - 115 Volts alternating current (AC)) of the Allen-Bradley IC698PSA350 is 15 Amperes, maximum.


Question: What 100 Watt Supply Inrush Current (Cold Start - 230 Volts AC (alternating current)) does the IC698PSA350 have?

Answer: The 100 Watt Supply Inrush Current (Cold Start - 230 Volts alternating current (AC)) of the Allen-Bradley IC698PSA350 is 30 Amperes, maximum.


Question: What is the 350 Watt Supply Inrush Current (Cold Start - 115 Volts alternating current (AC)) of the IC698PSA350?

Answer: The 350 Watt Supply Inrush Current (Cold Start - 115 Volts alternating current (AC)) of the IC698PSA350 is 30 Amperes, maximum.


Question: What 350 Watt Supply Inrush Current (Cold Start - 230 Volts AC (alternating current)) does the Rockwell Automation IC698PSA350 have?

Answer: The 350 Watt Supply Inrush Current (Cold Start - 230 Volts alternating current (AC)) of the IC698PSA350 is 60 Amperes, maximum.


Question: What Brand is included with the IC698PSA350?

Answer: The Rockwell Automation IC698PSA350 has a GE Fanuc Emerson Brand.


Question: What is the Input Power, 100 Watt Supply of the Allen Bradley IC698PSA350?

Answer: The Allen Bradley IC698PSA350 has a Input Power, 100 Watt Supply of 125 Watts (typical), 150 Watts (maximum).


Question: What is the Input Power, 350 Watt Supply of the IC698PSA350?

Answer: The Allen Bradley-Rockwell Automation IC698PSA350 has a Input Power, 350 Watt Supply of 437 Watts (typical), 500 Watts (maximum).


Question: What Input Voltage Range does the IC698PSA350 have?

Answer: The Input Voltage Range of the Allen Bradley Automation IC698PSA350 is 85 to 264 Volts AC (alternating current) 47-63 Hertz, 100-150 Volts direct current.


Question: What Inrush Current Duration (100 W) does the IC698PSA350 have?

Answer: The Inrush Current Duration (100 W) of the IC698PSA350 is 100 milliseconds.


Question: What is the Inrush Current Duration (350 W) of the IC698PSA350?

Answer: The Inrush Current Duration (350 W) of the IC698PSA350 is 100 milliseconds.


Question: What is the Nominal Rated Voltage of the Allen Bradley Automation IC698PSA350?

Answer: The IC698PSA350 has a Nominal Rated Voltage of 120/240 Volts alternating current (AC), 125 Volts DC.


Question: What is the Power Factor of the IC698PSA350?

Answer: The Allen Bradley-Rockwell Automation IC698PSA350 has a Power Factor of 0.99 min (only valid between 90 Volts AC (alternating current) and 260 Volts AC (alternating current)).


Series information for IC698PSA350

For additional information about IC698PSA350 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC698PSA350.

Revision Part # Also Known As Availability
IC698PSA350C IC698PSA350 Series C, Rev C Request a Quote
IC698PSA350D IC698PSA350 Series D, Rev D Request a Quote

Common Misspellings:

  • IC698PSA35O
  • IC698PSA3S0
  • IC698PSA3SO
  • IC698P5A350
  • IC698P5A35O
  • IC698P5A3S0
  • IC698P5A3SO
  • IC69BPSA350
  • IC69BPSA35O
  • IC69BPSA3S0
  • IC69BPSA3SO
  • IC69BP5A350
  • IC69BP5A35O
  • IC69BP5A3S0
  • IC69BP5A3SO
  • ICG98PSA350
  • ICG98PSA35O
  • ICG98PSA3S0
  • ICG98PSA3SO
  • ICG98P5A350
  • ICG98P5A35O
  • ICG98P5A3S0
  • ICG98P5A3SO
  • ICG9BPSA350
  • ICG9BPSA35O
  • ICG9BPSA3S0
  • ICG9BPSA3SO
  • ICG9BP5A350
  • ICG9BP5A35O
  • ICG9BP5A3S0
  • ICG9BP5A3SO
  • 1C698PSA350
  • 1C698PSA35O
  • 1C698PSA3S0
  • 1C698PSA3SO
  • 1C698P5A350
  • 1C698P5A35O
  • 1C698P5A3S0
  • 1C698P5A3SO
  • 1C69BPSA350
  • 1C69BPSA35O
  • 1C69BPSA3S0
  • 1C69BPSA3SO
  • 1C69BP5A350
  • 1C69BP5A35O
  • 1C69BP5A3S0
  • 1C69BP5A3SO
  • 1CG98PSA350
  • 1CG98PSA35O
  • 1CG98PSA3S0
  • 1CG98PSA3SO
  • 1CG98P5A350
  • 1CG98P5A35O
  • 1CG98P5A3S0
  • 1CG98P5A3SO
  • 1CG9BPSA350
  • 1CG9BPSA35O
  • 1CG9BPSA3S0
  • 1CG9BPSA3SO
  • 1CG9BP5A350
  • 1CG9BP5A35O
  • 1CG9BP5A3S0
  • 1CG9BP5A3SO

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP