GE / IP FANUC Series 90/30 In Stock

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC695CRH003

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC695CRH003
Series: RX3i PacSystem

Description:

The IC695CRH003 is a wiring harness that was designed to work with the IC695ACC651 and IC695ACC650 modules. The IC697MDL250's voltage rating is 120 volts AC with a frequency of 47 to 63 hertz. The IC694MDL260 module has also a total of 32 discrete input points that have been divided into four groups with an isolating time of 20 to 2540 milliseconds. The power consumption rating of this device is 0.35 amperes at 5 volts DC.


Key Features:

  • provides a voltage rating of 120 volts ac

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

The wiring harness assembly IC695CRH003 is a product of GE Fanuc and is meant to be used alongside the IC695ACC651 I/O adapter, as well as the IC695ACC650 conversion rack. It is for a Series 90-70 to Rx3i conversion device.

The IC697MDL250 is an input module with 32 input points divided into 4 groups of eight points. An advantage of the four isolated groups is that it makes it possible for each group of input points use different phase of the alternating current supply. The voltage rating of the input module is 120 volts AC at a given frequency of 47 to 63 hertz. For connection between any input to backplane, the input current is 1500 volts RMS, whereas connection between input points is 500 volts RMS. The rated power supply is 5 volts at 0.35 amperes. The electrical characteristics of the module meets the International Electrotechnical Commission (IEC) requirements. At the programmable logic controller (PLC) side, the light emitting diode (LED) indicators are installed on top of the module so that it might give an OFF and ON status of all the input points.

The input module IC694MDL260 has 32 input points that are discrete. The points are subdivided into four isolated groups each containing eight input points. The isolation between the groups has a time rating of 20 to 2540 milliseconds with an increment of 20 millisecond that is sent from the central processing unit. The power usage of the specified input module is 2 volts at 220 milliamperes with all the input status being ON.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC695CRH003?

Answer: Yes. We offer repairs for the IC695CRH003 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC695CRH003?

Answer: If you buy the IC695CRH003 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC695CRH003 online?

Answer: Yes. Automation Stop sells the IC695CRH003 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC695CRH003?

Answer: The IC695CRH003 is made by Emerson - GE Fanuc.


Series information for IC695CRH003

For additional information about IC695CRH003 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695CRH003.

Revision Part # Also Known As Availability
IC695CRH003A IC695CRH003 Series A, Rev A Request a Quote

Common Misspellings:

  • IC695CRH0O3
  • IC695CRHO03
  • IC695CRHOO3
  • IC69SCRH003
  • IC69SCRH0O3
  • IC69SCRHO03
  • IC69SCRHOO3
  • ICG95CRH003
  • ICG95CRH0O3
  • ICG95CRHO03
  • ICG95CRHOO3
  • ICG9SCRH003
  • ICG9SCRH0O3
  • ICG9SCRHO03
  • ICG9SCRHOO3
  • 1C695CRH003
  • 1C695CRH0O3
  • 1C695CRHO03
  • 1C695CRHOO3
  • 1C69SCRH003
  • 1C69SCRH0O3
  • 1C69SCRHO03
  • 1C69SCRHOO3
  • 1CG95CRH003
  • 1CG95CRH0O3
  • 1CG95CRHO03
  • 1CG95CRHOO3
  • 1CG9SCRH003
  • 1CG9SCRH0O3
  • 1CG9SCRHO03
  • 1CG9SCRHOO3

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP