GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC695CPK330

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC695CPK330
Series: RX3i PacSystem
UPC: 799705806733

Description:

The GE Fanuc Emerson IC695CPK330 is a CPU that can be employed for Rx3i PacSystem technology. The IC695CPK330 offers an RJ-45 Ethernet port and an energy pack that can store sufficient electrical power. The IC695CPK330 provides a 1 Gigahertz dual-core processor. The IC695CPK330 also includes 64 megabytes of RAM and 64 megabytes of flash memory.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC695CPK330 is a CPU that can be used with Rx3i PacSystem technologies. The IC695CPK330 offers an RJ-45 Ethernet port that supports 10 mega bauds, 100 mega bauds, or 1000 mega bauds, and an energy pack that can store sufficient electrical power to ensure the workability of memory circuits for a short time when the input power is disconnected or the battery is removed. The IC695CPK330 provides a 1 Gigahertz dual-core processor. The IC695CPK330 includes 64 megabytes of user logic RAM and 64 megabytes of flash memory with an endurance rating of 100,000 cycles to store and save CPU firmware and user data. The IC695CPK330 has a concise footprint and can be installed easily on any universal backplane, requiring only two (2) slots. The IC695CPK330 energy pack offers electrical energy of 40 watts and has a lifetime of five (5) years.

The IC695CPK330 supports many communication protocols such as serial I/O, Ethernet, Modbus RTU slave and SNP slave protocols. The IC695CPK330 has two (2) Ethernet ports with an RJ-45 connector; it requires a current of 1.2 Amperes at a voltage of 5 Volts DC and a current of 1 Ampere at a voltage of 3.3 Volts DC. The IC695CPK330 supports floating point for mathematical operations. It also supports 512 program blocks with 128 kilobytes for each. This GE Fanuc Emerson IC695CPK330 CPU is electrically compatible with PCI 2.2 standard and weighs approximately 4.54 kilograms (10 pounds) while shipping; it operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation / Emerson Automation
Series CPU for Rx3i PacSystem
Part Number IC695CPK330
Processing Speed 1 GHz
CPU Memory 64 Mbytes
Floating Point Yes
Ethernet Interfaces 2 (LAN 1 & LAN 2)
Serial Protocols Modbus RTU Slave, SNP Slave, Serial I/O
Embedded Comms RJ-45
Weight 4.54 Kg (10 lb)
Power Requirements +3.3 VDC: 1.0 Amps nominal +5 VDC: 1.2 Amps nominal
Operating Temperature 0 to 60°C (32°F to 140°F)
Program storage Up to 64 MB of battery-backed RAM/ 64 MB of non-volatile flash user memory
PCI Compatibility System designed to be electrically compliant with PCI 2.2 standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC695CPK330?

Answer: Yes. We offer repairs for the IC695CPK330 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC695CPK330?

Answer: If you buy the IC695CPK330 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC695CPK330 online?

Answer: Yes. Automation Stop sells the IC695CPK330 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC695CPK330?

Answer: The IC695CPK330 is made by Emerson - GE Fanuc.


Question: What Brand is included with the IC695CPK330?

Answer: The IC695CPK330 has a GE Automation / Emerson Automation Brand.


Question: What is the central processing unit (CPU) random-access memory (RAM) of the IC695CPK330?

Answer: The IC695CPK330 has a central processing unit (CPU) random-access memory (RAM) of 64 Mbytes.


Question: What Embedded Comms does the IC695CPK330 have?

Answer: The Allen Bradley/Rockwell Automation IC695CPK330 has a Embedded Comms of RJ-45.


Question: What is the Ethernet Interfaces of the IC695CPK330?

Answer: The Rockwell Automation IC695CPK330 has a Ethernet Interfaces of 2 (LAN 1 & LAN 2).


Question: Does the IC695CPK330 have a Floating Point?

Answer: Yes.


Question: What Operating Temperature does the Allen Bradley IC695CPK330 have?

Answer: The Allen Bradley IC695CPK330 has a Operating Temperature of 0 to 60°C (32°F to 140°F).


Question: What is the part Number of the Rockwell Automation IC695CPK330?

Answer: The IC695CPK330 has a part Number of IC695CPK330.


Question: What is the PCI Compatibility of the IC695CPK330?

Answer: The PCI Compatibility of the IC695CPK330 is System designed to be electrically compliant with PCI 2.2 standard.


Question: What Power Requirements does the IC695CPK330 have?

Answer: The Power Requirements of the Rockwell Automation IC695CPK330 is +3.3 VDC: 1.0 amperes nominal +5 VDC: 1.2 amperes nominal.


Question: What Processing Speed does the IC695CPK330 have?

Answer: The IC695CPK330 has a Processing Speed of 1 megahertz.


Question: What Program storage does the Rockwell Automation IC695CPK330 have?

Answer: The Program storage of the Rockwell Automation IC695CPK330 is Up to 64 MB of battery-backed RAM (random-access random-access memory (RAM))/ 64 MB of non-volatile flash user random-access memory (RAM).


Question: What Serial Protocols are included with the IC695CPK330?

Answer: The IC695CPK330 includes Modbus RTU Slave, SNP Slave, Serial input/output for its Serial Protocols.


Question: What is the Weight of the IC695CPK330?

Answer: The Rockwell-Automation IC695CPK330 has a Weight of 4.54 Kg (10 lb).


Series information for IC695CPK330

For additional information about IC695CPK330 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695CPK330.

Revision Part # Also Known As Availability
IC695CPK330-AAAA IC695CPK330 Series AAAA, Rev AAAA Request a Quote

Common Misspellings:

  • IC695CPK33O
  • IC69SCPK330
  • IC69SCPK33O
  • ICG95CPK330
  • ICG95CPK33O
  • ICG9SCPK330
  • ICG9SCPK33O
  • 1C695CPK330
  • 1C695CPK33O
  • 1C69SCPK330
  • 1C69SCPK33O
  • 1CG95CPK330
  • 1CG95CPK33O
  • 1CG9SCPK330
  • 1CG9SCPK33O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP