GE / IP FANUC Series 90/30 In Stock
IC695CPE310
✓ In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC695CPE310 |
| Series: | RX3i PacSystem |
| UPC: | 40729483425 |
Description:
The GE Fanuc IC695CPE310 can operate machinery and operations while also having the capability of controlling material handling systems. It interfaces with I/O and Intelligent Option modules through a dual-purpose PCI and serial backplane. This simplifies troubleshooting and allows you to see the current state of your system at a glance. The IC695CPE310 can be set up in most of the slots on the primary RX3i rack. This device is equipped with a 1.1 Gigahertz Atom processor.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC695CPE310 is equipped with a 1.1 Gigahertz Atom processor and 10 Megabytes of RAM. It is inbuilt Ethernet interface that supports two 10 Megabytes/sec and 100 Megabytes/sec connections. It also has serial ports for RS-485 and RS-232. The module may accommodate up to 512 blocks, each of these blocks can be up to 128 KB in size. The IC695CPE310 implements the SNP, Modbus RTU Slave and Serial Input/Output protocols, and communicates with (HMI) devices via the SNP protocol.
Programming languages for the IC695CPE310 include Structured Text, Ladder Diagram, C, and Function Block Diagram. When the device is powered up, the labeled LEDs (light emitting diodes) may light up green or red, or be off or blinking.
The IC695CPE310's processor is nearly 3 times faster than that of the Intel Celeron processor, which runs at 300 Megahertz. You can switch up from the CPU310 to the CPE310 without affecting the PME software. If you want to update from CPU310 to CPE310, keep in mind that the RS-232 interface on the CPE310 does not support 5V power on pin 5. SRAM and Flash memory are included in the IC695CPE310 CPU module, as well as 10 MB of user memory for storing program data.
At 3.3 volts direct current or 5 volts direct current backplane voltage ratings, the IC695CPE310 CPU module uses 1 ampere of current, while at 24 volts direct current backplane voltage levels, it requires 0.5 amperes. The RX3i PacSystems IC695CPE310 CPU must be housed inside a RX3i PacSystems control system. It should be placed on the system's central backplane.
FAQ
Question: Does Automation Stop offer repairs on the IC695CPE310?
Answer: Yes. We offer repairs for the IC695CPE310 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC695CPE310?
Answer: If you buy the IC695CPE310 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC695CPE310 online?
Answer: Yes. Automation Stop sells the IC695CPE310 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC695CPE310?
Answer: The IC695CPE310 is made by Emerson - GE Fanuc.
Series information for IC695CPE310
For additional information about IC695CPE310 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695CPE310.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC695CPE310-ABAD | IC695CPE310 Series ABAD, Rev ABAD | Request a Quote |
| IC695CPE310-ABAH | IC695CPE310 Series ABAH, Rev ABAH | Request a Quote |
| IC695CPE310-ADBD | IC695CPE310 Series ADBD, Rev ADBD | Request a Quote |
| IC695CPE310-AEBD | IC695CPE310 Series AEBD, Rev AEBD | Request a Quote |
| IC695CPE310-BCAB | IC695CPE310 Series BCAB, Rev BCAB | Request a Quote |
| IC695CPE310-DM | IC695CPE310 Series DM, Rev DM | Request a Quote |
Common Misspellings:
- IC695CPE31O
- IC695CPE3I0
- IC695CPE3IO
- IC69SCPE310
- IC69SCPE31O
- IC69SCPE3I0
- IC69SCPE3IO
- ICG95CPE310
- ICG95CPE31O
- ICG95CPE3I0
- ICG95CPE3IO
- ICG9SCPE310
- ICG9SCPE31O
- ICG9SCPE3I0
- ICG9SCPE3IO
- 1C695CPE310
- 1C695CPE31O
- 1C695CPE3I0
- 1C695CPE3IO
- 1C69SCPE310
- 1C69SCPE31O
- 1C69SCPE3I0
- 1C69SCPE3IO
- 1CG95CPE310
- 1CG95CPE31O
- 1CG95CPE3I0
- 1CG95CPE3IO
- 1CG9SCPE310
- 1CG9SCPE31O
- 1CG9SCPE3I0
- 1CG9SCPE3IO
