The GE Fanuc Emerson IC695CPE305 is a CPU that can be employed for Rx3i PacSystem. The CPU is employed to achieve real-time monitoring of machines and processes. The device includes 5 megabytes of RAM, 10 megabytes of NVRAM storage, 5 megabytes of user storage, 16-kilowords for analog I/O, and 16 kilobits discrete I/O. This CPU contains a USB interface 2.0 type A to send and save applications and an extra RS-232 port to update the firmware. The IC695CPE305 includes eleven LED indicators on the faceplate to show the current CPU status. The device includes an embedded Ethernet port that supports Serial I/O, Modbus RTU Slave, SNP connections and includes a single RJ-45 Ethernet port that senses automatically the data rate of either 10 megabits per second or 100 megabits per second, half or full-duplex and wiring arrangement either crossover or straight link.

The IC695CPE305 supports 512 program blocks with 128 kilobytes for each. This device is compatible with expansion racks and the majority of series 90-30 modules. The CPU supports configurable program memory and data. The IC695CPE305 exchanges data with the programmer via either Ethernet or serial port and with I/O and modules via a dual Serial/PCI backplane. This CPU can be programmed using ladder, ST, FBD, and C programming languages. This device has an optional energy pack that can store sufficient electrical power to ensure the workability of CPU and memory circuits for a short time when the input power is disconnected or the battery is removed. This device draws a current of 1 ampere at a voltage of 3.3 volts DC and 5 volts DC, and 500 milliamperes at a voltage of 24 volts DC. The IC695CPE305 weighs approximately 360 grams (0.8 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.

The GE Fanuc / Emerson Automation IC695CPE305 comes with support for RS232 and RS485 communication standards. Both the built-in serial communication ports on this module support these protocols. Along with the serial ports, this PACSystem RX3i controller module also comes with One (1) Ethernet communication port and One (1) USB 2.0 Master port. This module is part of the PACSystems RX3i automation platform. Using the single (1) Ethernet communication port, this module is able to establish Ethernet communication. It supports 10/100 Megabytes per second communication rate. This communication port is used to establish communication between Human Machine Interface (HMI), Programming workstation, Supervisory Control and Data Acquisition (SCADA) systems, software products and 3rd party hardware. The GE Fanuc / Emerson Automation IC695CPE305 comes with Ethernet ports that support OPC UA. It can also be used to establish connection to third party modules leveraging the OPC Protocol. It comes with support for Ethernet (PROFINET, Ethernet Global Data, Channels, Modbus TCP Server and Client), Genius, PROFIBUS DP, DeviceNet. This module can be sued to control as many as 8 racks at the same time. The GE Fanuc / Emerson Automation IC695CPE305 comes with support for 8 local racks. The Central Processing Unit PCI is compliant with 2.2 standards. The GE Fanuc / Emerson Automation IC695CPE305 PACSystem RX3i controller module comes with a processor speed of 1.1 Gigahertz. 1 Amp at +5- and +3.3-Volts DC, 0.5 Amps at +24 Volts DC is the power requirement for this module. This controller comes with support for 8 local racks.