GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC695CEP001

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC695CEP001
Series: RX3i PacSystem

Description:

The IC695CEP001 CEP is a carrier component. It is manufactured GE Fanuc. 19.2 to 30 volts direct current (DC) is the rated voltage to be used with this carrier component. At twenty-four (24) volts direct current, the estimated power rating is 5.25 watts, or the equivalent of 0.22 amps. It comes equipped with Micro-B USB port for firmware. This carrier component is equipped with two (2) embedded Ethernet RJ-45 ports.


Key Features:

  • includes 177.2 x 51 x 35 millimeters (7 x 2 x 1.3 inches) dimensions
  • utilizes an operating temperature of 0 to 60 degrees celsius (32 to 140 degrees fahrenheit)
  • has rx3i cep carrier with rj-45 copper ethernet interface

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$612.00

Available: 6

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$408.00

Available: 1

What is Refurbished

Your order will ship by . Need it faster?

Looking for a IC695CEP001? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc IC695CEP001 is a type of CEP GE Fanuc CEP carrier module. This device is generally used with, and even designed to be used with, the GE RX3i system. It is ideal for the use of PROFINET communication. For communication purposes, it comes with a copper RJ-45 Ethernet interface. Furthermore, it comes with two (2) Ethernet port connectors. These connector ports come equipped with 10/100 Base-TX receptacles. Being an advanced system component, it has many options, such as full programming and configuration options. Furthermore, this product comes with support for several network topologies. The GE Fanuc IC695CEP001 comes with a USB port for all the necessary firmware upgrades. It comes equipped for improved fault handling. Additionally, this device has options for advanced remote node module scanning. Nineteen point two to thirty (19.2 to 30) volts direct current, or DC, is the optimal operating voltage rating for this carrier module. At a nominal voltage of twenty-four (24) volts direct current, this product can generate a power output of 5.25 watts, or the equivalent of 0.22 amps. The GE Fanuc IC695CEP001 comes with support for 1024 bytes of I/O data per station. Users can connect only one I/O module per station. 

The GE Fanuc IC695CEP001 CEP carrier module has dimensions measuring 177.2 millimeters x 51 millimeters x 35 millimeters, or the equivalent dimensions of 7 inches x 2 inches x 1.3 inches. The optimal operating temperature for this module is zero to sixty (0 to 60) degrees Celsius, or converted to degrees Fahrenheit, 32 to 140 °F. Each station on this module can support 512 bytes of I/O data.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC695CEP001?

Answer: Yes. We offer repairs for the IC695CEP001 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC695CEP001?

Answer: If you buy the IC695CEP001 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC695CEP001 online?

Answer: Yes. Automation Stop sells the IC695CEP001 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC695CEP001?

Answer: The IC695CEP001 is made by Emerson - GE Fanuc.


Series information for IC695CEP001

For additional information about IC695CEP001 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695CEP001.

Revision Part # Also Known As Availability
IC695CEP001-AAAA IC695CEP001 Series AAAA, Rev AAAA Request a Quote
IC695CEP001-AAAF IC695CEP001 Series AAAF, Rev AAAF Request a Quote

Common Misspellings:

  • IC695CEP00I
  • IC695CEP0O1
  • IC695CEP0OI
  • IC695CEPO01
  • IC695CEPO0I
  • IC695CEPOO1
  • IC695CEPOOI
  • IC69SCEP001
  • IC69SCEP00I
  • IC69SCEP0O1
  • IC69SCEP0OI
  • IC69SCEPO01
  • IC69SCEPO0I
  • IC69SCEPOO1
  • IC69SCEPOOI
  • ICG95CEP001
  • ICG95CEP00I
  • ICG95CEP0O1
  • ICG95CEP0OI
  • ICG95CEPO01
  • ICG95CEPO0I
  • ICG95CEPOO1
  • ICG95CEPOOI
  • ICG9SCEP001
  • ICG9SCEP00I
  • ICG9SCEP0O1
  • ICG9SCEP0OI
  • ICG9SCEPO01
  • ICG9SCEPO0I
  • ICG9SCEPOO1
  • ICG9SCEPOOI
  • 1C695CEP001
  • 1C695CEP00I
  • 1C695CEP0O1
  • 1C695CEP0OI
  • 1C695CEPO01
  • 1C695CEPO0I
  • 1C695CEPOO1
  • 1C695CEPOOI
  • 1C69SCEP001
  • 1C69SCEP00I
  • 1C69SCEP0O1
  • 1C69SCEP0OI
  • 1C69SCEPO01
  • 1C69SCEPO0I
  • 1C69SCEPOO1
  • 1C69SCEPOOI
  • 1CG95CEP001
  • 1CG95CEP00I
  • 1CG95CEP0O1
  • 1CG95CEP0OI
  • 1CG95CEPO01
  • 1CG95CEPO0I
  • 1CG95CEPOO1
  • 1CG95CEPOOI
  • 1CG9SCEP001
  • 1CG9SCEP00I
  • 1CG9SCEP0O1
  • 1CG9SCEP0OI
  • 1CG9SCEPO01
  • 1CG9SCEPO0I
  • 1CG9SCEPOO1
  • 1CG9SCEPOOI

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP