GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC695CBL002 |
Series: | RX3i PacSystem |
Description:
The IC695CBL002 is a replacement cable that is manufactured by GE Fanuc. This replacement cable is meant to connect a CPU with an energy pack. The energy pack must belong to the RX3i PACSystem from GE Fanuc. It comes with 7-pin keyed connector. The cable has a length of 1 meter (36 inches). 120/240 Volts DC, 125 Volts DC, or 24 Volts DC is the operating voltage rating on this module.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc IC695CBL002 replacement cable is meant to be used on a DIN Rail. This replacement cable connects a CPU with an external optional energy pack. For heavy industrial use, this replacement cable is made using the best material in the market. In order to be used in adverse climates, this replacement cable comes with a protective coating. The GE Fanuc IC695CBL002 replacement cable is connected on the bottom part of both the CPU and the energy pack. These connectors are in compliance with the directive 2011/65/EU from the EU RoHS standard. For power, it needs to be connected to a 120/240 Volts DC, 125 Volts DC, or 24 Volts DC power source. It comes with a 7-pin keyed connector. The GE Fanuc IC695CBL002 replacement cable has a length of 1 meter (36 inches). However, this replacement cable can be made in custom lengths according to the user’s specification. This cable is meant to be mounted on a DIN Rail, such as the EN50022 Rail. However, it can be mounted on panels where other equipment is also mounted. The supported CPU for this module is the GE IC695CPE330 CPU. The GE Fanuc IC695CBL002 replacement cable is able to provide additional backplane power in the case of power outage. In such cases, it can automatically switch to the power pack. During power outage, the backup battery can support the CPU long enough for it to save important data. After the files are saved, they are stored in the non-volatile memory.
Question: Does Automation Stop offer repairs on the IC695CBL002?
Answer: Yes. We offer repairs for the IC695CBL002 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC695CBL002?
Answer: If you buy the IC695CBL002 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC695CBL002 online?
Answer: Yes. Automation Stop sells the IC695CBL002 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC695CBL002?
Answer: The IC695CBL002 is made by Emerson - GE Fanuc.
For additional information about IC695CBL002 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695CBL002.
Revision Part # | Also Known As | Availability |
---|---|---|
IC695CBL002A | IC695CBL002 Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.