GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC695ALG628 |
| Series: | RX3i PacSystem |
| UPC: | 101254208652 |
Description:
The GE Fanuc Emerson IC695ALG628 is an analog voltage/current input module that can be used for Rx3i PACSystems. This module provides non-isolated eight single-ended or four differential input channels. The inputs can be programmed for either voltage or current input ranges. The IC695ALG628 weighs approximately 450 grams (0.99 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Adding Items to Cart
Looking for a IC695ALG628? We can help!
Request a QuoteKey Features:
- is a analog input with hart communication
- ships with 0 to 20ma, 4 to 20ma, +/-20ma of current range
- has operating temperature of 32 to 140 degrees fahrenheit
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC695ALG628 is an analog voltage/current input module that can be employed for Rx3i PACSystems. This module provides non-isolated eight single-ended or four differential input channels that can convert an analog signal to a digital signal with a resolution of 24 bits. These inputs can be programmed for either voltage or current input ranges: from 4 milliamperes to 20 milliamperes, from 0 milliamperes to 20 milliamperes, from -20 milliamperes to 20 milliamperes, from 0 volts DC to 10 volts DC, from -10 volts DC to 10 volts DC, from -5 volts DC to 5 volts DC, from 0 volts DC to 5 volts DC or from 1 volt DC to 5 volts DC. This module draws a current of 450 milliamperes at a voltage of +5 volts DC and a current of 625 milliamperes at a voltage of 3.3 volts DC. The IC695ALG628 module has three LED indicators that are located on the faceplate to show the module, field, and terminal block status.
The IC695ALG628 has a red/green LED indicator labeled “TB” which indicates the state of the terminal block. The device supports a spring, box, extended spring, or extended box style front terminal block. This module can be easily mounted in an RX3i universal backplane. The input module supports an overvoltage of ± 60 volts DC and an overcurrent of 28 milliamperes. The IC695ALG628 dissipates an electrical power of 5.55 watts and provides diagnostics features. This device contains four internal HART modems. The IC695ALG628 weighs approximately 450 grams (0.99 pounds) while shipping.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | PACSystems RX3i |
| Part Number | IC695ALG628 |
| Description | Analog voltage/current input module |
| Number of channels | 8 single-ended or 4 differential input channels |
| Load requirement | 450 mA maximum @ 5.0V / 625 mA maximum @ 3.3V |
| ADC resolution | 24 bit ADC converted to Floating Point or Integer |
| Number of input range | 8 |
| Input current ranges | 0 to 20mA, 4 to 20mA, +/- 20mA |
| Input voltage ranges | +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V |
| CPU Version | PACSystems RX3i CPU firmware version 3.5 and later |
| Power dissipation within the module | 5.55 watts maximum |
| Filter options | 8Hz, 12Hz, 16Hz, 40Hz, 200Hz, 500Hz |
| Overvoltage | +/-60 VDC continuous, maximum |
| Overcurrent | +/-28mA continuous, maximum |
| Internal HART modems | 4 |
| Weight | 450 g (0.99 lb.) |
FAQ
Question: Does Automation Stop offer repairs on the IC695ALG628?
Answer: Yes. We offer repairs for the IC695ALG628 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC695ALG628?
Answer: If you buy the IC695ALG628 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC695ALG628 online?
Answer: Yes. Automation Stop sells the IC695ALG628 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC695ALG628?
Answer: The IC695ALG628 is made by Emerson - GE Fanuc.
Question: What ADC resolution does the Allen Bradley Automation IC695ALG628 have?
Answer: The IC695ALG628 has a ADC resolution of 24 bit ADC converted to Floating Point or Integer.
Question: What Brand does the IC695ALG628 have?
Answer: The IC695ALG628 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the central processing unit (CPU) Version of the IC695ALG628?
Answer: The IC695ALG628 has a central processing unit (CPU) Version of PACSystems RX3i central processing unit (CPU) firmware version 3.5 and later.
Question: What Description is included with the IC695ALG628?
Answer: The Rockwell Automation IC695ALG628 has a Analog voltage/current input module Description.
Question: What is the Filter options of the Allen Bradley/Rockwell Automation IC695ALG628?
Answer: The IC695ALG628 has a Filter options of 8Hz, 12Hz, 16Hz, 40Hz, 200Hz, 500Hz.
Question: What is the Input current ranges of the IC695ALG628?
Answer: The Allen Bradley/Rockwell Automation IC695ALG628 has a Input current ranges of 0 to 20mA, 4 to 20mA, +/- 20mA.
Question: What is the Input voltage ranges of the Rockwell-Automation IC695ALG628?
Answer: The Input voltage ranges of the Rockwell-Automation IC695ALG628 is +/- 10 volts 0 to 10 volts +/- 10 volts 0 to 10 volts 1 to 5V.
Question: What is the Internal HART modems of the IC695ALG628?
Answer: The Internal HART modems of the Rockwell-Automation IC695ALG628 is 4.
Question: What Load requirement does the Allen Bradley/Rockwell Automation IC695ALG628 have?
Answer: The Allen Bradley/Rockwell Automation IC695ALG628 has a Load requirement of 450 mA maximum @ 5.0 volts / 625 mA maximum @ 3.3V.
Question: What Number of channels does the Allen Bradley Automation IC695ALG628 have?
Answer: The Number of channels of the Allen Bradley Automation IC695ALG628 is 8 single-ended or 4 differential input channels.
Question: What is the Number of input range of the IC695ALG628?
Answer: The Allen Bradley IC695ALG628 has a Number of input range of 8.
Question: What Overcurrent does the IC695ALG628 have?
Answer: The Overcurrent of the Rockwell-Automation IC695ALG628 is +/-28mA continuous, maximum.
Question: What is the Overvoltage of the IC695ALG628?
Answer: The Overvoltage of the IC695ALG628 is +/-60 VDC continuous, maximum.
Question: What is the unit Number of the Allen-Bradley IC695ALG628?
Answer: The IC695ALG628 has a unit Number of IC695ALG628.
Question: What is the Power dissipation within the module of the Allen Bradley-Rockwell Automation IC695ALG628?
Answer: The Allen Bradley-Rockwell Automation IC695ALG628 has a Power dissipation within the module of 5.55 watts maximum.
Question: What Weight does the Rockwell-Automation IC695ALG628 have?
Answer: The Weight of the Rockwell-Automation IC695ALG628 is 450 g (0.99 lb.).
Series information for IC695ALG628
For additional information about IC695ALG628 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695ALG628.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC695ALG628-AA | IC695ALG628 Series AA, Rev AA | Request a Quote |
| IC695ALG628-EA | IC695ALG628 Series EA, Rev EA | Request a Quote |
| IC695ALG628-HC | IC695ALG628 Series HC, Rev HC | Request a Quote |
| IC695ALG628-HF | IC695ALG628 Series HF, Rev HF | Request a Quote |
| IC695ALG628-KF | IC695ALG628 Series KF, Rev KF | Request a Quote |
| IC695ALG628-RS-CA | IC695ALG628 Series RS-CA, Rev RS-CA | Request a Quote |
Common Misspellings:
- IC695ALG62B
- IC695ALGG28
- IC695ALGG2B
- IC695AL6628
- IC695AL662B
- IC695AL6G28
- IC695AL6G2B
- IC69SALG628
- IC69SALG62B
- IC69SALGG28
- IC69SALGG2B
- IC69SAL6628
- IC69SAL662B
- IC69SAL6G28
- IC69SAL6G2B
- ICG95ALG628
- ICG95ALG62B
- ICG95ALGG28
- ICG95ALGG2B
- ICG95AL6628
- ICG95AL662B
- ICG95AL6G28
- ICG95AL6G2B
- ICG9SALG628
- ICG9SALG62B
- ICG9SALGG28
- ICG9SALGG2B
- ICG9SAL6628
- ICG9SAL662B
- ICG9SAL6G28
- ICG9SAL6G2B
- 1C695ALG628
- 1C695ALG62B
- 1C695ALGG28
- 1C695ALGG2B
- 1C695AL6628
- 1C695AL662B
- 1C695AL6G28
- 1C695AL6G2B
- 1C69SALG628
- 1C69SALG62B
- 1C69SALGG28
- 1C69SALGG2B
- 1C69SAL6628
- 1C69SAL662B
- 1C69SAL6G28
- 1C69SAL6G2B
- 1CG95ALG628
- 1CG95ALG62B
- 1CG95ALGG28
- 1CG95ALGG2B
- 1CG95AL6628
- 1CG95AL662B
- 1CG95AL6G28
- 1CG95AL6G2B
- 1CG9SALG628
- 1CG9SALG62B
- 1CG9SALGG28
- 1CG9SALGG2B
- 1CG9SAL6628
- 1CG9SAL662B
- 1CG9SAL6G28
- 1CG9SAL6G2B
