GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC694TBS032 |
Series: | RX3i PacSystem |
UPC: | 201812183114 |
Description:
GE Fanuc manufactures the IC694TBS032 terminal block, which is a spring-style terminal block having 36-pins. It belongs to the GE RX3i series. It is compatible with solid, compressed, and insulated wire. The IC694TBS032 block contains 36 spring-style terminals for connecting the module to the field. The strip length of the wire utilized in the block is 0.31 inches, and it is capable of supporting wire sizes ranging from 14 to 28 AWG.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC694TBS032 terminal block is a spring-clamped high-density terminal block. GE Fanuc is the company that made it. The GE RX3i and Series 90-30 PLC systems are the most common applications for this high-density terminal block. Because of its small size, the terminal block is quick to set up and saves panel space. The block's exterior body is better insulated than the block's inside. The thicker insulation wires can flow through the block because of the thick insulation. The block's strip wire length is 0.31 inches, and it accommodates a wire gauges rating of 14 to 28 AWG. It can handle both solid and stranded wire. The 36 spring-type connections on the IC694TBS032 terminal block are utilized for field wiring to the module. The IC694TBS032 terminal block is an RX3i PacSystem PLC component. The PAC engine is controlled by these PLCs, which provide a high-performance control system. The CPU in this system is a processor with high throughput and quick computing rates. The user memory on this CPU is 64 MB. On the front of the IC694TBS032 terminal block is a protective door lock. The operators can quickly remove and reinstall the terminal. The latch should be pulled down until it is removed from the block to remove the terminal. The terminal block should be moved up until it snaps into place throughout the installation procedure. During the replacement operation, the wires that link to the terminals should be correctly removed. The connecting points on the IC694TBS032 terminal block employ a torque of 7 pounds per inch. To avoid overheating, the terminal block should have adequate ventilation.
Question: Does Automation Stop offer repairs on the IC694TBS032?
Answer: Yes. We offer repairs for the IC694TBS032 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694TBS032?
Answer: If you buy the IC694TBS032 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694TBS032 online?
Answer: Yes. Automation Stop sells the IC694TBS032 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694TBS032?
Answer: The IC694TBS032 is made by Emerson - GE Fanuc.
For additional information about IC694TBS032 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694TBS032.
Revision Part # | Also Known As | Availability |
---|---|---|
IC694TBS032E | IC694TBS032 Series E, Rev E | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.