GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC694MDL660 |
Series: | RX3i PacSystem |
UPC: | 290823026305 |
Description:
The GE Fanuc Emerson IC694MDL660 is a logic input module that includes 32 input points which can be positive or negative logic inputs and supports a voltage rating range from 0 Volts DC to 30 Volts DC. The IC694MDL660 inputs are grouped into four (4) well-isolated groups of eight (8) inputs with a common power terminal for each group (I1 - I8, I9 ? I16, I17 ? I24, and I25 ? I32) which are labeled with green LED indicators to show the on/off status of inputs. The IC694MDL660 weighs approximately 210 grams (0.46 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC694MDL660 is a logic input module that includes 32 input points which can be positive or negative logic inputs and supports a voltage rating range from 0 Volts DC to 30 Volts DC. The IC694MDL660 inputs are grouped into four (4) well-isolated groups of eight (8) inputs with a common power terminal for each group (I1 - I8, I9 – I16, I17 – I24, and I25 – I32) which are labeled with green LED indicators to show the on/off status of inputs. The IC694MDL660 employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 1500 Volts between logic and field sides and 250 Volts between groups. The IC694MDL660 can be easily mounted in any input or output slots of the RX3i system. The IC694MDL660 has seven (7) selectable input filter times.
The IC694MDL660 employs 48 input bits and 16 output bits to communicate with the RX3i CPU. This module draws a current of 300 milliamperes at a voltage rating of +5 Volts DC per point. The IC694MDL660 inputs draw a current of 7 milliamperes per point. The IC694MDL660 has red/green LED indicator labelled “TB LED” which indicates the state of the terminal block. The IC694MDL660 supports either a spring or box style front terminal block. The IC694MDL660 contains two (2) blue bands located on the front side to warn and indicate that is a low-voltage module. The IC694MDL660 weighs approximately 210 grams (0.46 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.
Brand | GE Automation Fanuc / Emerson Automation |
Series | 32 points, 24 volts DC positive/negative logic input module for Rx3i PacSystem |
Part Number | IC694MDL660 |
Number of I/O Points | 32 |
Input Groups | 4, eight inputs each |
Rated voltage | 24 Volts DC, Positive or Negative Logic |
Input Voltage Range | Zero (0) to 30 Volts DC |
Isolation | 1500 Volts between field side and logic side 250 Volts between groups |
Input Current | 7.0 mA |
On-State Voltage | 11.5 to 30 Volts DC |
Off-State Voltage | Zero (0) to 5 Volts DC |
On-State Current | 3.2 mA (minimum) |
Off-State Current | 1.1 mA (maximum) |
On Response Time | 0.5ms, 1.0ms, 2.0ms, 5.0ms, 10.0ms, 50.0ms & 100.0ms (as per filter setting) |
Off Response Time | 0.5ms, 1.0ms, 2.0ms, 5.0ms, 10.0ms, 50.0ms & 100.0ms (as per filter setting) |
Internal Power Consumption | 300mA (all inputs on) from 5 Volt bus on backplane |
Weight | 210 g (0.46 lb) |
Question: Does Automation Stop offer repairs on the IC694MDL660?
Answer: Yes. We offer repairs for the IC694MDL660 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL660?
Answer: If you buy the IC694MDL660 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694MDL660 online?
Answer: Yes. Automation Stop sells the IC694MDL660 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694MDL660?
Answer: The IC694MDL660 is made by Emerson - GE Fanuc.
Question: What Brand does the Allen Bradley/Rockwell Automation IC694MDL660 have?
Answer: The IC694MDL660 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What Input Current does the IC694MDL660 have?
Answer: The Allen Bradley IC694MDL660 has a Input Current of 7.0 mA.
Question: What Input Groups does the Allen Bradley/Rockwell Automation IC694MDL660 have?
Answer: The IC694MDL660 has a Input Groups of 4, eight inputs each.
Question: What Input Voltage Range does the Allen Bradley IC694MDL660 have?
Answer: The Allen Bradley IC694MDL660 has a Input Voltage Range of Zero (0) to 30 Volts DC.
Question: What Internal Power Consumption does the Allen Bradley-Rockwell Automation IC694MDL660 have?
Answer: The Internal Power Consumption of the Allen Bradley-Rockwell Automation IC694MDL660 is 300mA (all inputs on) from 5 Volt bus on backplane.
Question: What is the Isolation of the IC694MDL660?
Answer: The Isolation of the Allen Bradley IC694MDL660 is 1500 Volts between field side and logic side 250 Volts between groups.
Question: What is the Number of input/output Points of the Allen Bradley IC694MDL660?
Answer: The Allen Bradley IC694MDL660 has a Number of input/output Points of 32.
Question: What Off Response Time does the IC694MDL660 have?
Answer: The Off Response Time of the IC694MDL660 is 0.5ms, 1.0ms, 2.0ms, 5.0ms, 10.0ms, 50.0ms & 100.0ms (as per filter setting).
Question: What Off-State Current does the IC694MDL660 have?
Answer: The Off-State Current of the Allen Bradley-Rockwell Automation IC694MDL660 is 1.1 mA (maximum).
Question: What is the Off-State Voltage of the IC694MDL660?
Answer: The Off-State Voltage of the IC694MDL660 is Zero (0) to 5 Volts DC.
Question: What On Response Time does the Rockwell Automation IC694MDL660 have?
Answer: The IC694MDL660 has a On Response Time of 0.5ms, 1.0ms, 2.0ms, 5.0ms, 10.0ms, 50.0ms & 100.0ms (as per filter setting).
Question: What is the On-State Current of the IC694MDL660?
Answer: The IC694MDL660 has a On-State Current of 3.2 mA (minimum).
Question: What On-State Voltage does the IC694MDL660 have?
Answer: The IC694MDL660 has a On-State Voltage of 11.5 to 30 Volts DC.
Question: What is the part Number of the Allen-Bradley IC694MDL660?
Answer: The unit Number of the IC694MDL660 is IC694MDL660.
Question: What is the Rated voltage of the Allen Bradley Automation IC694MDL660?
Answer: The Rated voltage of the IC694MDL660 is 24 Volts DC (direct current), Positive or Negative Logic.
Question: What Weight does the IC694MDL660 have?
Answer: The IC694MDL660 has a Weight of 210 g (0.46 lb).
For additional information about IC694MDL660 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL660.
Revision Part # | Also Known As | Availability |
---|---|---|
IC694MDL660-BC | IC694MDL660 Series BC, Rev BC | Request a Quote |
IC694MDL660-EC | IC694MDL660 Series EC, Rev EC | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.