GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC694MDL655

✓ In Stock

IC694MDL655 Image 1 thumbnail
IC694MDL655 Image 2 thumbnail
IC694MDL655 Image 3 thumbnail
IC694MDL655 Image 4 thumbnail
IC694MDL655 Image 5 thumbnail
IC694MDL655 Image 6 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC694MDL655
Series: RX3i PacSystem
UPC: 300544900164

Description:

The IC694MDL655 is a 32-Point 24 Volt DC Positive/Negative Logic Input module manufactured by GE Fanuc Automation and is a part of the RX3i Series. This module provides 32 discrete input points that can operate at up to 30 Volts DC.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$289.00

Available: 7

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$232.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a IC694MDL655? We can help!

Request a Quote

Key Features:

  • utilizes two male 24-pin connector connector
  • is a input module type

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC694MDL655 is a 32-Point Positive/Negative Logic Input module from RX3i Series modules by GE Fanuc Automation. This input module provides thirty-two (32) discrete input points with positive or negative logic and will operate at up to 30 Volts DC. The 32 input points of the module are arranged into four (4) isolated groups, each consisting of eight (8) points with each group having its own common. All four input groups are isolated but these groups are referenced to the same user common connection.

The IC694MDL655 module reports no fault or alarm diagnostics. Power for operating the field devices can come from an external supply or from the isolated +24 Volts DC output of the module. Green LEDs indicate the ON or OFF status of each input point of the module. The low voltage indication of the module is provided by the blue band present on its front. The IC694MDL655 input module can be installed in any slot of the RX3i PACSystems. The input voltage range of the IC694MDL655 is zero (0) to 30 Volts DC and the input current is 7 milliamperes at 24 Volts DC. The group-to-group isolation is 250 Volts AC continuous and 500 Volts AC for one minute cycle. For Field to the backplane and to frame ground, the isolation is 250 Volts AC continuous, and 1500 Volts AC for one minute.

Technical Specifications

Rated Voltage 24 Volts DC
Input Current 7.0 milliamperes @ 24 Volts DC
Inputs per Module 32
Isolation Filed to Backplane 250 Volts AC
Group to Group 50 Volts continuous; 500 Volts AC for one minute
On-state Voltage 11.5 to 30 Volts DC
On Response Time 2 milliseconds, maximum
Off Response Time 2 milliseconds, maximum
Input Voltage Range Zero (0) to 30 Volts DC
Power Consumption 195 milliamperes from 5 Volt bus
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC694MDL655?

Answer: Yes. We offer repairs for the IC694MDL655 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL655?

Answer: If you buy the IC694MDL655 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC694MDL655 online?

Answer: Yes. Automation Stop sells the IC694MDL655 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC694MDL655?

Answer: The IC694MDL655 is made by Emerson - GE Fanuc.


Question: What Group to Group does the Rockwell-Automation IC694MDL655 have?

Answer: The Group to Group of the Rockwell-Automation IC694MDL655 is 50 Volts continuous; 500 Volts alternating current (AC) for one minute.


Question: What Input Current does the Allen Bradley/Rockwell Automation IC694MDL655 have?

Answer: The Input Current of the IC694MDL655 is 7.0 milliamperes @ 24 Volts direct current.


Question: What is the Input Voltage Range of the Allen Bradley/Rockwell Automation IC694MDL655?

Answer: The Allen Bradley/Rockwell Automation IC694MDL655 has a Input Voltage Range of Zero (0) to 30 Volts direct current (DC).


Question: What Inputs per Module does the Allen Bradley-Rockwell Automation IC694MDL655 have?

Answer: The Allen Bradley-Rockwell Automation IC694MDL655 has a Inputs per Module of 32.


Question: What is the Isolation Filed to Backplane of the IC694MDL655?

Answer: The Rockwell-Automation IC694MDL655 has a Isolation Filed to Backplane of 250 Volts AC (alternating current).


Question: What is the Off Response Time of the IC694MDL655?

Answer: The Off Response Time of the IC694MDL655 is 2 milliseconds, maximum.


Question: What On Response Time does the IC694MDL655 have?

Answer: The On Response Time of the Allen Bradley Automation IC694MDL655 is 2 milliseconds, maximum.


Question: What is the On-state Voltage of the Rockwell Automation IC694MDL655?

Answer: The On-state Voltage of the Rockwell Automation IC694MDL655 is 11.5 to 30 Volts direct current.


Question: What is the Power Consumption of the IC694MDL655?

Answer: The Power Consumption of the IC694MDL655 is 195 milliamperes from 5 Volt bus.


Question: What Rated Voltage does the Allen Bradley/Rockwell Automation IC694MDL655 have?

Answer: The Allen Bradley/Rockwell Automation IC694MDL655 has a Rated Voltage of 24 Volts DC.


Series information for IC694MDL655

For additional information about IC694MDL655 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL655.

Revision Part # Also Known As Availability
IC694MDL655B IC694MDL655 Series B, Rev B Request a Quote
IC694MDL655C IC694MDL655 Series C, Rev C Request a Quote
IC694MDL655D IC694MDL655 Series D, Rev D Request a Quote

Common Misspellings:

  • IC694MDL65S
  • IC694MDL6S5
  • IC694MDL6SS
  • IC694MDLG55
  • IC694MDLG5S
  • IC694MDLGS5
  • IC694MDLGSS
  • ICG94MDL655
  • ICG94MDL65S
  • ICG94MDL6S5
  • ICG94MDL6SS
  • ICG94MDLG55
  • ICG94MDLG5S
  • ICG94MDLGS5
  • ICG94MDLGSS
  • 1C694MDL655
  • 1C694MDL65S
  • 1C694MDL6S5
  • 1C694MDL6SS
  • 1C694MDLG55
  • 1C694MDLG5S
  • 1C694MDLGS5
  • 1C694MDLGSS
  • 1CG94MDL655
  • 1CG94MDL65S
  • 1CG94MDL6S5
  • 1CG94MDL6SS
  • 1CG94MDLG55
  • 1CG94MDLG5S
  • 1CG94MDLGS5
  • 1CG94MDLGSS

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP