GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC694MDL654 |
Series: | RX3i PacSystem |
UPC: | 618988409694 |
Description:
The GE Fanuc IC694MDL654 of the RX3i series is an input module with 32 point inputs, a 5/12 VDC (TTL) rated voltage, and positive/negative logic. It has a rated input current of 3 mA at 5 VDC and 8.5 mA at 12 VDC, an input voltage range of 0 to 15 VDC, and power consumption ratings of 440 mA (5 V bus), 96 mA (user 5 V), and 272 mA (user 12 V). IT also has an isolated +5V supply (current limited to 150 mA).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC694MDL654 by GE Fanuc is an RX3i series input module with 32 positive/negative logic input points. This module is equipped with 32 discrete TTL input points arranged as four isolated groups with eight inputs in each. The inputs are positive/negative logic based, have a maximum response time of 1 ms, and can operate at DC levels from 0 V up to 15 VDC. The inputs can be connected with a cable length of 98.4 feet (30 m, maximum). The input module has a rated voltage of 5/12 VDC (TTL) with a range of 4.5 to 15 V and switches ON at >4.2 V. A regulated +5 V supply (with current limited to 150 mA) is available through the front I/O connectors of the module and is isolated from the backplane. It has a rated input current of 3 mA at 5 VDC and 8.5 mA at 12 VDC. The maximum power consumption of the input module is 440 mA (maximum) from the +5 V bus on the backplane (when the isolated +5 V supply is used to power inputs and all 32 inputs are ON). Additionally, its power consumption is 96 mA (typical) at 5 VDC and 272 mA (typical) at 12 VDC (when the user input supply is used and 32 inputs are ON). It is UL 508 certified, equivalent to CSA C22.2 No 142M1987 standard. It is also approved as Class I, Div. 2, Groups A, B, C, D for operation in hazardous locations. The compact input can be panel mounted or on a DIN rail. Its additional features include high-speed and patented technology for faster throughput with hot swap capabilities and a variety of voltage ranges, types, current capacity, isolation, and response times to meet diverse application requirements. This module is compatible with all devices of the RX3i system and can be installed in any associated I/O slot.
Question: Does Automation Stop offer repairs on the IC694MDL654?
Answer: Yes. We offer repairs for the IC694MDL654 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL654?
Answer: If you buy the IC694MDL654 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694MDL654 online?
Answer: Yes. Automation Stop sells the IC694MDL654 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694MDL654?
Answer: The IC694MDL654 is made by Emerson - GE Fanuc.
For additional information about IC694MDL654 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL654.
Revision Part # | Also Known As | Availability |
---|---|---|
IC694MDL654B | IC694MDL654 Series B, Rev B | Request a Quote |
IC694MDL654D | IC694MDL654 Series D, Rev D | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.