GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC694MDL390 |
| Series: | RX3i PacSystem |
| UPC: | 362177932295 |
Description:
The GE Fanuc manufactured IC694MDL390 Module is an output module for the RX3i PacSystem series. It may be inserted in any slot of I/O on the RX3i system. The Output module is rated for 120 to 240 volts alternating current. Individual outputs featuring 3 amp fuses are provided on the IC694MDL390 module. It is equipped with 5 LEDs that indicate the state of the outputs. Additionally, the RC snubber assists in preventing electrical noise from occurring on the line. The IC694MDL390 is capable of handling a broad range of incandescent and inductive loads.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Adding Items to Cart
Adding Items to Cart
Looking for a IC694MDL390? We can help!
Request a QuoteKey Features:
- has operating temperature of 0 to 60 degrees celsius (32 to 140 degrees fahrenheit)
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
GE Fanuc manufactured IC694MDL390 output Module as a part of RX3i PacSystem series has a rated voltage between 120 and 240 Volts AC, a 2 Amps per point output current, a 25 Amps per cycle inrush current, and an output voltage range of 85 to 264 Volts AC at a 50 to 60 Hertz frequency ranges. This Module contains five output points, each with a unique common. The circuits of outputs might be operated on various phases of the alternating current source or from a single power source. The user may supply the alternating current required to power the loads attached to the outputs. This device can only be driven by an alternating current supply; it cannot be supplied by a direct current supply. Each output of the GE Fanuc IC694MDL390 Output Module is secured by a fuse of a 3 Amp rating. It includes an RC snubber unit to protect all outputs from power line transients.
The GE Fanuc IC694MDL390 Output Module is equipped with labeled LEDs that display the condition of each output point. Additionally, it is equipped with a red "F" LED that flashes when one of the output fuses blows. The red band across the top of the module indicates that it is a high-voltage output module from GE Fanuc. This Module operates between 32 and 140 0 F and stores from -40 to 185 ℉. Its non-condensing humidity ranges from 5 - 95 percentages. The Module's shock resistance is rated at 15 G for 11 milliseconds under IEC60068-2-27 and JISC0912 standards, while its vibration resistance is rated at 10 to 57 Hertz with a peak displacement of 0.0524 millimeters (0.006 inches) per IEC60068-2-6 and JISC0911 standards.
FAQ
Question: Does Automation Stop offer repairs on the IC694MDL390?
Answer: Yes. We offer repairs for the IC694MDL390 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL390?
Answer: If you buy the IC694MDL390 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694MDL390 online?
Answer: Yes. Automation Stop sells the IC694MDL390 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694MDL390?
Answer: The IC694MDL390 is made by Emerson - GE Fanuc.
Series information for IC694MDL390
For additional information about IC694MDL390 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL390.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC694MDL390A | IC694MDL390 Series A, Rev A | Request a Quote |
| IC694MDL390B | IC694MDL390 Series B, Rev B | Request a Quote |
| IC694MDL390C | IC694MDL390 Series C, Rev C | Request a Quote |
Common Misspellings:
- IC694MDL39O
- ICG94MDL390
- ICG94MDL39O
- 1C694MDL390
- 1C694MDL39O
- 1CG94MDL390
- 1CG94MDL39O
