GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC694MDL350 |
| Series: | RX3i PacSystem |
| UPC: | 516930652375 |
Description:
The IC694MDL350 is a 120/240 Volt AC 16-Point output module. The module is manufactured by GE Fanuc that provides 16 isolated output points.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC694MDL350 is a 120/240 Volt AC 16-Point output module manufactured by GE Fanuc. It provides sixteen (16) separately isolated output points. The module is highly protected against electrical noise transmitting from the power line, hence, the module doesn’t require an additional snubber. The 16 isolated outputs can handle several incandescent loads. The output loads require an external AC power supply for operation. On the back of the IC694MDL350 module, a DIP switch is placed, which is used for controlling the default output mode. It can be set to Hold Last or Force Off State. The user is required to remove the module from the backplane to use this DIP switch.
The LED indicators present on the front side of the module help the users monitor the use of the output. These LEDs are individually numbered and indicate the ON and OFF status of the output and helps in monitoring the terminal block. Furthermore, the module also has two red bands on the door to alert the users about the high voltage of the module. The IC694MDL350 can be connected to spring style, box-style, or extended terminal block versions. The extended terminal blocks provide the extra depth required for field wiring to connected AC devices. The IC694MDL350 module can be used with any Rx3i system I/O slot but it should be used with 3.50 or higher version Rx3i CPUs. It should never be used with any 90-30 series PLC CPUs. The output current of the module is 2 Amperes per point and up to 5 Amperes per module, whereas the output voltage range is from 74 Volts AC to 265 Volts AC.
Technical Specifications
| Rated Voltage | 120/240 Volts AC |
| Power Consumption | 315 milliamperes from 5 Volt bus |
| Frequency | 50/60 Hertz |
| Outputs per Module | 16 isolated |
| Output Voltage Range | 74-265 Volts AC, 120/240 Volts AC nominal |
| Group to Group | 250 Volts AC continuous; 1500 Volts AC for 1 minute |
| Diagnostics | Field side terminal block status reported to RX3i CPU |
| Field to Logic State | 250 Volts AC continuous; 1500 Volts AC for 1 minute |
| Inrush Current | 20 Amperes maximum for one cycle |
| Minimum Load Current | 10 milliamperes per point |
| Output Leakage Current | 2 milliamperes maximum |
| On Response Time | 1/2 cycle maximum |
| Off Response Time | 1/2 cycle maximum |
FAQ
Question: Does Automation Stop offer repairs on the IC694MDL350?
Answer: Yes. We offer repairs for the IC694MDL350 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL350?
Answer: If you buy the IC694MDL350 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694MDL350 online?
Answer: Yes. Automation Stop sells the IC694MDL350 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694MDL350?
Answer: The IC694MDL350 is made by Emerson - GE Fanuc.
Question: What Diagnostics does the IC694MDL350 have?
Answer: The IC694MDL350 has a Diagnostics of Field side terminal block status reported to RX3i central processing unit (CPU).
Question: What Field to Logic State does the Allen-Bradley IC694MDL350 have?
Answer: The Field to Logic State of the IC694MDL350 is 250 Volts alternating current (AC) continuous; 1500 Volts alternating current (AC) for 1 minute.
Question: What is the Frequency of the IC694MDL350?
Answer: The Frequency of the IC694MDL350 is 50/60 Hertz.
Question: What is the Group to Group of the IC694MDL350?
Answer: The Group to Group of the Rockwell-Automation IC694MDL350 is 250 Volts AC (alternating current) continuous; 1500 Volts AC (alternating current) for 1 minute.
Question: What is the Inrush Current of the Allen Bradley-Rockwell Automation IC694MDL350?
Answer: The Allen Bradley-Rockwell Automation IC694MDL350 has a Inrush Current of 20 Amperes maximum for one cycle.
Question: What Minimum Load Current does the Allen-Bradley IC694MDL350 have?
Answer: The Minimum Load Current of the Allen-Bradley IC694MDL350 is 10 milliamperes per point.
Question: What Off Response Time does the Rockwell Automation IC694MDL350 have?
Answer: The Off Response Time of the IC694MDL350 is 1/2 cycle maximum.
Question: What is the On Response Time of the IC694MDL350?
Answer: The On Response Time of the Allen-Bradley IC694MDL350 is 1/2 cycle maximum.
Question: What is the Output Leakage Current of the IC694MDL350?
Answer: The Output Leakage Current of the IC694MDL350 is 2 milliamperes maximum.
Question: What Output Voltage Range does the Rockwell Automation IC694MDL350 have?
Answer: The Output Voltage Range of the IC694MDL350 is 74-265 Volts AC (alternating current), 120/240 Volts AC (alternating current) nominal.
Question: What Outputs per Module does the Rockwell Automation IC694MDL350 have?
Answer: The Outputs per Module of the IC694MDL350 is 16 isolated.
Question: What is the Power Consumption of the IC694MDL350?
Answer: The Power Consumption of the Rockwell Automation IC694MDL350 is 315 milliamperes from 5 Volt bus.
Question: What is the Rated Voltage of the IC694MDL350?
Answer: The Rated Voltage of the Allen-Bradley IC694MDL350 is 120/240 Volts AC (alternating current).
Series information for IC694MDL350
For additional information about IC694MDL350 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL350.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC694MDL350-AA | IC694MDL350 Series AA, Rev AA | Request a Quote |
| IC694MDL350-EA | IC694MDL350 Series EA, Rev EA | Request a Quote |
Common Misspellings:
- IC694MDL35O
- IC694MDL3S0
- IC694MDL3SO
- ICG94MDL350
- ICG94MDL35O
- ICG94MDL3S0
- ICG94MDL3SO
- 1C694MDL350
- 1C694MDL35O
- 1C694MDL3S0
- 1C694MDL3SO
- 1CG94MDL350
- 1CG94MDL35O
- 1CG94MDL3S0
- 1CG94MDL3SO
