GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC694MDL330

✓ In Stock

IC694MDL330 Image 1 thumbnail
IC694MDL330 Image 2 thumbnail
IC694MDL330 Image 3 thumbnail
IC694MDL330 Image 4 thumbnail
IC694MDL330 Image 5 thumbnail
IC694MDL330 Image 6 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC694MDL330
Series: RX3i PacSystem
UPC: 1832494869010

Description:

The IC694MDL330 is a 120/240 Volts AC Output module by GE Fanuc Automation. The module provides eight (8) output points that are divided into two (2) groups of four (4) points each with each group having a separate common.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC694MDL330 is a 120/240 Volts AC output module manufactured by GE Fanuc Automation and is a part of the RX3i PACSystems Series. The module operates on 120 to 240 Volts AC and has an output current rating of 2 Amperes and a voltage range of 85 to 264 Volts AC at a frequency of 50 to 60 Hertz. The inrush output current rating of the module is 20 Amperes maximum at one cycle. It provides eight (8) output points grouped in two (2) isolated groups, each containing four (4) output points. Each module has its own common and these commons are not part of the module. Both the groups are powered by one power source and these groups can be used on separate phases of the AC power supply. The IC694MDL330 output module has AC power supplied by the operators for loads linked to the outputs. The module operates with an AC power supply and it cannot operate with a DC power supply.

The two groups of outputs are protected by a 5-Ampere fuse for every common. Each output also features an RC snubber to protect the output point from transient electrical noise. The IC694MDL330 output module operates in a temperature range of zero (0) to 60 degrees Celsius and can be safely stored in temperatures between -40 to 85 degrees Celsius. The output module can tolerate a non-condensing humidity level of 5 to 95%. The module can operate in the vibrational frequency range of 10 to 57 Hertz with a peak displacement of 0.006 inches. This output module is compliant with IEC60068-2-6 and JISC0911 standards.

Technical Specifications

Frequency 50/60 Hertz
Output Voltage Range 85 to 264 Volts AC
Rated Voltage 120/240 Volts AC
Number of Outputs 8 (2 groups of 4)
Power Consumption 160 milliamperes from 5 Volt bus
Minimum Load Current 100 milliamperes
Output Voltage Drop 1.5 Volts, maximum
Output Current 2 Amperes maximum per point
Fuses (quantity 2) 5 Amperes
Inrush Current 20 Amperes maximum for one cycle
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC694MDL330?

Answer: Yes. We offer repairs for the IC694MDL330 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL330?

Answer: If you buy the IC694MDL330 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC694MDL330 online?

Answer: Yes. Automation Stop sells the IC694MDL330 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC694MDL330?

Answer: The IC694MDL330 is made by Emerson - GE Fanuc.


Question: What is the Frequency of the IC694MDL330?

Answer: The IC694MDL330 has a Frequency of 50/60 Hertz.


Question: What is the Fuses (quantity 2) of the Allen Bradley Automation IC694MDL330?

Answer: The Fuses (quantity 2) of the Allen Bradley Automation IC694MDL330 is 5 Amperes.


Question: What is the Inrush Current of the IC694MDL330?

Answer: The Inrush Current of the IC694MDL330 is 20 Amperes maximum for one cycle.


Question: What is the Minimum Load Current of the IC694MDL330?

Answer: The IC694MDL330 has a Minimum Load Current of 100 milliamperes.


Question: What is the Number of Outputs of the Rockwell Automation IC694MDL330?

Answer: The IC694MDL330 has a Number of Outputs of 8 (2 groups of 4).


Question: What Output Current does the Allen-Bradley IC694MDL330 have?

Answer: The IC694MDL330 has a Output Current of 2 Amperes maximum per point.


Question: What Output Voltage Drop does the IC694MDL330 have?

Answer: The Output Voltage Drop of the Allen Bradley-Rockwell Automation IC694MDL330 is 1.5 Volts, maximum.


Question: What is the Output Voltage Range of the Allen Bradley IC694MDL330?

Answer: The Allen Bradley IC694MDL330 has a Output Voltage Range of 85 to 264 Volts AC (alternating current).


Question: What Power Consumption does the Allen-Bradley IC694MDL330 have?

Answer: The Power Consumption of the Allen-Bradley IC694MDL330 is 160 milliamperes from 5 Volt bus.


Question: What is the Rated Voltage of the Rockwell-Automation IC694MDL330?

Answer: The Rockwell-Automation IC694MDL330 has a Rated Voltage of 120/240 Volts AC (alternating current).


Series information for IC694MDL330

For additional information about IC694MDL330 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL330.

Revision Part # Also Known As Availability
IC694MDL330C IC694MDL330 Series C, Rev C Request a Quote

Common Misspellings:

  • IC694MDL33O
  • ICG94MDL330
  • ICG94MDL33O
  • 1C694MDL330
  • 1C694MDL33O
  • 1CG94MDL330
  • 1CG94MDL33O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP