GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC694MDL230 |
Series: | RX3i PacSystem |
UPC: | 799705793385 |
Description:
Product number IC694MDL230 is an input module. Designed and produced by Emerson - GE Fanuc, this device belongs to the RX3i PacSystem series of products. This module has a voltage rating of 120 volts AC at a frequency of 50/60 hertz. Additionally, the input voltage range of this device is 0 to 132 volts AC at 50/60 hertz. This module has a total of 8 inputs. The input current of the IC694MDL230 input module is 14.5 milliamperes at the rated voltage.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC694MDL230 is an input module. This module was designed and produced by Allen Bradley / Rockwell Automation. It is a part of the RX3i PacSystem series of products. This input module has a total of eight (8) points. The primary function of this input module is to interrelate among PLC devices and other input devices, such as switching devices, detectors, and knobs. The maximum voltage of this device is 120 volts. It's used to submit data and information at high speeds. Also, it enables faster throughput. This input module supports a wide range of current capacities and has hot-swap capabilities. It has positive logic and a current usage rating of 60 milliamperes from a 5-volt bus. Furthermore, this module can be easily mounted with a panel or DIN rail mounting base. Aside from that, the GE Fanuc IC694MDL230 has been UL 508 certified and meets CSA standards. This device was designed to be able to operate in a Class 1, Division 2 environment. This device is equipped with modern diagnostics features that ensure flexibility during operation. It is intended to meet a wide range of application requirements. Part number IC694MDL230 is compact, flexible, and easy to manage. It can also save space and reduce the cost of logistics. The system response of the unit ranges between 30 and 45 milliseconds. The module's operating frequency ranges from 50 to 60 hertz. The front section of the module has eight (8) different LEDs (light emitting diodes) that show whether the module's eight (8) input points are active or not.
Question: Does Automation Stop offer repairs on the IC694MDL230?
Answer: Yes. We offer repairs for the IC694MDL230 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694MDL230?
Answer: If you buy the IC694MDL230 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694MDL230 online?
Answer: Yes. Automation Stop sells the IC694MDL230 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694MDL230?
Answer: The IC694MDL230 is made by Emerson - GE Fanuc.
For additional information about IC694MDL230 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694MDL230.
Revision Part # | Also Known As | Availability |
---|---|---|
IC694MDL230B | IC694MDL230 Series B, Rev B | Request a Quote |
IC694MDL230C | IC694MDL230 Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.