GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC694DSM314

✓ In Stock

IC694DSM314 Image 1 thumbnail
IC694DSM314 Image 2 thumbnail
IC694DSM314 Image 3 thumbnail
IC694DSM314 Image 4 thumbnail
IC694DSM314 Image 5 thumbnail
IC694DSM314 Image 6 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC694DSM314
Series: RX3i PacSystem
UPC: 799705793408

Description:

The GE Fanuc Emerson IC694DSM314 is a high-efficiency motion controller that can control one to four (1-4) servo axis. The DSM314 supports either the standard mode or the follower mode. The IC694DSM314 supports GE both ? and ? series motors and digital servo amplifier applications. The IC694DSM314 contains an electronic CAM ability.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE IC694DSM314 is a high-efficiency motion controller that can control one to four (1-4) servo axis. The DSM314 supports either the standard mode or the follower mode. The IC694DSM314 supports GE both α and β series motors and digital servo amplifier applications. It contains an electronic CAM ability and processes blocks in less than 5 milliseconds. The IC694DSM314 provides a position error integrator and velocity feedforward. It has high efficiency and resolution of programming units with a powerful and easy motion program instruction set. The IC694DSM314 supports one to four-axis motion programs. The IC694DSM314 can store ten (10) programs and forty (40) subroutines in non-volatile memory.

The IC694DSM314 has a single-point of connecting to program this module. The IC694DSM314 has a faceplate COMM port to upgrade the firmware which is saved in flash memory. The DSM314 includes analogue outputs with a resolution of 13-bits which can be either monitored by the PLC or employed as a digital servo tuning controller. The IC694DSM314 includes analog I/O and four (4) digital outputs that can support either 24 Volts or 5 Volts. The IC694DSM314 requires a current of 800 milliamperes at a voltage rating of 5 Volts DC. The IC694DSM314 has eight (8) status LED indicators located on the faceplate. The IC694DSM314 also contains two (2) connectors for both 5 Volts DC and 24 Volts DC I/O. The DSM314 is equipped with an FSSB connector that offers optical fiber link to servo amplifiers. This controller weighs approximately 450 grams (0.99 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series Motion multi-axis controller module (DSM314) for Rx3i PacSystem
Part Number IC694DSM314
Module Type Servo Module
Number of Slots 1
Backplane Support Universal Backplane
Analog Inputs 4-In digital mode, 8-In analog mode
Analog Outputs 4-In digital mode, 0-In analog mode
Internal Power Used 1300 mA @ 5 VDC
Power Supply Voltage 5 VDC from backplane
Power Supply Current Draw by DSM 860 mA plus encoder supply current
Number of DSM324i Modules in PACSystems RX3i Main Backplane Up to 5 DSM324i modules in RX3i Main Backplane with Power Supply PWR040
Number of DSM324i Modules in PACSystems RX3i Expansion/Remote Backplane 2 DSM324i modules in expansion/remote backplane with PWR321 / 6 DSM324i modules in remote backplane with PWR330/331 / 6 DSM324i modules in expansion backplane with PWR330/331
LED Status Indicators 8
Weight 450 g (0.99 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC694DSM314?

Answer: Yes. We offer repairs for the IC694DSM314 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC694DSM314?

Answer: If you buy the IC694DSM314 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC694DSM314 online?

Answer: Yes. Automation Stop sells the IC694DSM314 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC694DSM314?

Answer: The IC694DSM314 is made by Emerson - GE Fanuc.


Question: What is the Analog Inputs of the IC694DSM314?

Answer: The Analog Inputs of the IC694DSM314 is 4-In digital mode, 8-In analog mode.


Question: What is the Analog Outputs of the IC694DSM314?

Answer: The Analog Outputs of the Allen Bradley IC694DSM314 is 4-In digital mode, 0-In analog mode.


Question: What Backplane Support is included with the IC694DSM314?

Answer: The Allen Bradley IC694DSM314 has a Universal Backplane Backplane Support.


Question: What Brand is included with the Allen Bradley Automation IC694DSM314?

Answer: The Allen Bradley Automation IC694DSM314 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What is the Internal Power Used of the IC694DSM314?

Answer: The Allen Bradley-Rockwell Automation IC694DSM314 has a Internal Power Used of 1300 mA @ 5 VDC.


Question: What is the LED Status Indicators of the Allen-Bradley IC694DSM314?

Answer: The Allen-Bradley IC694DSM314 has a LED Status Indicators of 8.


Question: What Module Type does the IC694DSM314 have?

Answer: The IC694DSM314 has a Servo Module Module Type.


Question: What is the Number of DSM324i Modules in PACSystems RX3i Expansion/Remote Backplane of the Allen Bradley/Rockwell Automation IC694DSM314?

Answer: The IC694DSM314 has a Number of DSM324i Modules in PACSystems RX3i Expansion/Remote Backplane of 2 DSM324i modules in expansion/remote backplane with PWR321 / 6 DSM324i modules in remote backplane with PWR330/331 / 6 DSM324i modules in expansion backplane with PWR330/331.


Question: What is the Number of DSM324i Modules in PACSystems RX3i Main Backplane of the Rockwell-Automation IC694DSM314?

Answer: The Number of DSM324i Modules in PACSystems RX3i Main Backplane of the Rockwell-Automation IC694DSM314 is Up to 5 DSM324i modules in RX3i Main Backplane with power supply component PWR040.


Question: What Number of Slots does the Rockwell-Automation IC694DSM314 have?

Answer: The IC694DSM314 has a Number of Slots of 1.


Question: What is the unit Number of the IC694DSM314?

Answer: The component Number of the Allen Bradley IC694DSM314 is IC694DSM314.


Question: What power supply unit Current Draw by DSM does the Allen Bradley-Rockwell Automation IC694DSM314 have?

Answer: The IC694DSM314 has a power supply component Current Draw by DSM of 860 mA plus encoder supply current.


Question: What power supply Voltage does the Allen Bradley IC694DSM314 have?

Answer: The IC694DSM314 has a power supply unit Voltage of 5 VDC from backplane.


Question: What Weight does the Rockwell Automation IC694DSM314 have?

Answer: The IC694DSM314 has a Weight of 450 g (0.99 lb).


Series information for IC694DSM314

For additional information about IC694DSM314 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694DSM314.

Revision Part # Also Known As Availability
IC694DSM314-AA IC694DSM314 Series AA, Rev AA Request a Quote

Common Misspellings:

  • IC694DSM3I4
  • IC694D5M314
  • IC694D5M3I4
  • ICG94DSM314
  • ICG94DSM3I4
  • ICG94D5M314
  • ICG94D5M3I4
  • 1C694DSM314
  • 1C694DSM3I4
  • 1C694D5M314
  • 1C694D5M3I4
  • 1CG94DSM314
  • 1CG94DSM3I4
  • 1CG94D5M314
  • 1CG94D5M3I4

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP